linux-kernel - Re: [PATCH 1/2] arm64: dts: mt8183: config dsi node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CANMq1KDGUSGE5Vb3WQMhgECkBL_PTMHnS+8wTP6W0Uhhv9RJJQ@mail.gmail.com>
Date:   Wed, 6 Jan 2021 18:48:45 +0800
From:   Nicolas Boichat <drinkcat@...omium.org>
To:     Hsin-Yi Wang <hsinyi@...omium.org>
Cc:     linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Enric Balletbo i Serra <enric.balletbo@...labora.com>,
        Devicetree List <devicetree@...r.kernel.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] arm64: dts: mt8183: config dsi node

On Wed, Jan 6, 2021 at 6:47 PM Nicolas Boichat <drinkcat@...omium.org> wrote:
>
> On Wed, Jan 6, 2021 at 4:46 PM Hsin-Yi Wang <hsinyi@...omium.org> wrote:
> >
> > Config dsi node for mt8183 kukui. Set panel and ports.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> > ---
> >  .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 38 +++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > index bf2ad1294dd30..4cfb3560e5d11 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > @@ -249,6 +249,36 @@ &cpu7 {
> >         proc-supply = <&mt6358_vproc11_reg>;
> >  };
> >
> > +&dsi0 {
> > +       status = "okay";
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +       panel: panel@0 {
> > +               compatible = "boe,tv101wum-nl6";
>
> We're going to have many panels in the kukui family, so I think I'd
> prefer it if you moved the compatible string to krane-sku0 dts: it
> makes it easier to figure out what's different with sku0.

I meant sku176 (since you are adding sku0 with a different panel
compatible later).

>
> Then maybe leave all the other properties in this file, as it seems
> like all MIPI panels use the exact same pin/supplies?
>
> (And add a comment here saying that the compatible needs to be set in
> board dts?)
>
> > +               reg = <0>;
> > +               enable-gpios = <&pio 45 0>;
> > +               pinctrl-names = "default";
> > +               pinctrl-0 = <&panel_pins_default>;
> > +               avdd-supply = <&ppvarn_lcd>;
> > +               avee-supply = <&ppvarp_lcd>;
> > +               pp1800-supply = <&pp1800_lcd>;
> > +               status = "okay";
> > +               port {
> > +                       panel_in: endpoint {
> > +                               remote-endpoint = <&dsi_out>;
> > +                       };
> > +               };
> > +       };
> > +
> > +       ports {
> > +               port {
> > +                       dsi_out: endpoint {
> > +                               remote-endpoint = <&panel_in>;
> > +                       };
> > +               };
> > +       };
> > +};
> > +
> >  &i2c0 {
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&i2c0_pins>;
> > @@ -547,6 +577,14 @@ pins_clk {
> >                 };
> >         };
> >
> > +       panel_pins_default: panel_pins_default {
> > +               panel_reset {
> > +                       pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> > +                       output-low;
> > +                       bias-pull-up;
> > +               };
> > +       };
> > +
> >         pwm0_pin_default: pwm0_pin_default {
> >                 pins1 {
> >                         pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
> > --
> > 2.29.2.729.g45daf8777d-goog
> >