linux-kernel - [PATCH V4 0/5] gpio-xilinx: Update on xilinx gpio driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1609936000-28378-1-git-send-email-srinivas.neeli@xilinx.com>
Date:   Wed, 6 Jan 2021 17:56:35 +0530
From:   Srinivas Neeli <srinivas.neeli@...inx.com>
To:     <linus.walleij@...aro.org>, <bgolaszewski@...libre.com>,
        <michal.simek@...inx.com>, <shubhrajyoti.datta@...inx.com>,
        <sgoud@...inx.com>, <hancock@...systems.ca>,
        <vilhelm.gray@...il.com>, <syednwaris@...il.com>
CC:     <linux-gpio@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <git@...inx.com>,
        Srinivas Neeli <srinivas.neeli@...inx.com>
Subject: [PATCH V4 0/5] gpio-xilinx: Update on xilinx gpio driver

This patch series does the following:
-Simplify with dev_err_probe().
-Reduce spinlock array to array.
-Add interrupt support
-Add support for suspend and resume
-Add check for gpio-width
---
Changes in V4:
-Created new patch to simplify code with dev_err_probe().
-Updated minor review comments.
-Created new patch to check gpio-width.
Changes in V3:
-Created separate patch to arrange headers in sorting order.
-Updated dt-bindings.
-Created separate patch for Clock changes and runtime resume.
 and suspend.
-Created separate patch for spinlock changes.
-Created separate patch for remove support.
-Fixed coverity errors.
-Updated minor review comments.

Changes in V2:
-Added check for return value of platform_get_irq() API.
-Updated code to support rising edge and falling edge.
-Added xgpio_xlate() API to support switch.
-Added MAINTAINERS fragment.

Tested Below scenarios:
-Tested Loop Back.(channel 1.0 connected to channel 2.0)
-Tested External switch(Used DIP switch)
-Tested Cascade scenario(Here gpio controller acting as
 an interrupt controller).
---

Srinivas Neeli (5):
  gpio: gpio-xilinx: Simplify with dev_err_probe()
  gpio: gpio-xilinx: Reduce spinlock array to array
  gpio: gpio-xilinx: Add interrupt support
  gpio: gpio-xilinx: Add support for suspend and resume
  gpio: gpio-xilinx: Add check if width exceeds 32

 drivers/gpio/Kconfig       |   3 +
 drivers/gpio/gpio-xilinx.c | 367 ++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 347 insertions(+), 23 deletions(-)

-- 
2.7.4