[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210107140828.398567212@linuxfoundation.org>
Date: Thu, 7 Jan 2021 15:16:31 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Paolo Abeni <pabeni@...hat.com>,
"David S. Miller" <davem@...emloft.net>,
Suren Baghdasaryan <surenb@...gle.com>
Subject: [PATCH 4.9 11/32] net: ipv6: keep sk status consistent after datagram connect failure
From: Paolo Abeni <pabeni@...hat.com>
commit 2f987a76a97773beafbc615b9c4d8fe79129a7f4 upstream.
On unsuccesful ip6_datagram_connect(), if the failure is caused by
ip6_datagram_dst_update(), the sk peer information are cleared, but
the sk->sk_state is preserved.
If the socket was already in an established status, the overall sk
status is inconsistent and fouls later checks in datagram code.
Fix this saving the old peer information and restoring them in
case of failure. This also aligns ipv6 datagram connect() behavior
with ipv4.
v1 -> v2:
- added missing Fixes tag
Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails")
Signed-off-by: Paolo Abeni <pabeni@...hat.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Cc: Suren Baghdasaryan <surenb@...gle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
net/ipv6/datagram.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -145,10 +145,12 @@ int __ip6_datagram_connect(struct sock *
struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr;
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
- struct in6_addr *daddr;
+ struct in6_addr *daddr, old_daddr;
+ __be32 fl6_flowlabel = 0;
+ __be32 old_fl6_flowlabel;
+ __be32 old_dport;
int addr_type;
int err;
- __be32 fl6_flowlabel = 0;
if (usin->sin6_family == AF_INET) {
if (__ipv6_only_sock(sk))
@@ -238,9 +240,13 @@ ipv4_connected:
}
}
+ /* save the current peer information before updating it */
+ old_daddr = sk->sk_v6_daddr;
+ old_fl6_flowlabel = np->flow_label;
+ old_dport = inet->inet_dport;
+
sk->sk_v6_daddr = *daddr;
np->flow_label = fl6_flowlabel;
-
inet->inet_dport = usin->sin6_port;
/*
@@ -249,8 +255,15 @@ ipv4_connected:
*/
err = ip6_datagram_dst_update(sk, true);
- if (err)
+ if (err) {
+ /* Restore the socket peer info, to keep it consistent with
+ * the old socket state
+ */
+ sk->sk_v6_daddr = old_daddr;
+ np->flow_label = old_fl6_flowlabel;
+ inet->inet_dport = old_dport;
goto out;
+ }
sk->sk_state = TCP_ESTABLISHED;
sk_set_txhash(sk);
Powered by blists - more mailing lists