| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Jan 2021 23:50:04 +0100
From: Adrien Grassein <adrien.grassein@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: broonie@...nel.org, jagan@...rulasolutions.com,
lgirdwood@...il.com, robh+dt@...nel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Adrien Grassein <adrien.grassein@...il.com>
Subject: [PATCH v3 4/6] regulator: pf8x00: remove nxp,ilim-ma property
This property seems useless because we can use the
regulator-max-microamp generic property to do the same
and using generic code.
The only things it changes is the default value. The original
code was using "2100" (mA) as default one, but I think we should
keep the value in the OTP memory as the default one. This value
is automatically loaded in the register by the chip.
Signed-off-by: Adrien Grassein <adrien.grassein@...il.com>
---
drivers/regulator/pf8x00-regulator.c | 95 ++++++++++++++--------------
1 file changed, 47 insertions(+), 48 deletions(-)
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index af9918cd27aa..90383e394f85 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -105,13 +105,6 @@ enum pf8x00_ldo_states {
};
#define PF8X00_LDO_BASE(i) (6 * (i - PF8X00_LDO1) + PF8X00_LDO1_CONFIG1)
-enum swxilim_bits {
- SWXILIM_2100_MA,
- SWXILIM_2600_MA,
- SWXILIM_3000_MA,
- SWXILIM_4500_MA,
-};
-#define PF8X00_SWXILIM_SHIFT 3
#define PF8X00_SWXILIM_MASK GENMASK(4, 3)
#define PF8X00_SWXPHASE_MASK GENMASK(2, 0)
#define PF8X00_SWXPHASE_DEFAULT 0
@@ -128,7 +121,6 @@ enum pf8x00_devid {
struct pf8x00_regulator {
struct regulator_desc desc;
- u8 ilim;
u8 phase_shift;
};
@@ -150,6 +142,11 @@ static const int pf8x00_ldo_voltages[] = {
3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000,
};
+/* Output: 2.1A to 4.5A */
+static const unsigned int pf8x00_sw_current_table[] = {
+ 2100000, 2600000, 3000000, 4500000,
+};
+
#define SWV(i) (6250 * i + 400000)
#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
@@ -199,32 +196,6 @@ static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *d
return container_of(desc, struct pf8x00_regulator, desc);
}
-static void swxilim_select(const struct regulator_desc *desc, int ilim)
-{
- struct pf8x00_regulator *data = desc_to_regulator(desc);
- u8 ilim_sel;
-
- switch (ilim) {
- case 2100:
- ilim_sel = SWXILIM_2100_MA;
- break;
- case 2600:
- ilim_sel = SWXILIM_2600_MA;
- break;
- case 3000:
- ilim_sel = SWXILIM_3000_MA;
- break;
- case 4500:
- ilim_sel = SWXILIM_4500_MA;
- break;
- default:
- ilim_sel = SWXILIM_2100_MA;
- break;
- }
-
- data->ilim = ilim_sel;
-}
-
static int pf8x00_of_parse_cb(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *config)
@@ -235,13 +206,6 @@ static int pf8x00_of_parse_cb(struct device_node *np,
int val;
int ret;
- ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
- if (ret)
- dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n",
- desc->id - PF8X00_LDO4);
-
- swxilim_select(desc, val);
-
ret = of_property_read_u32(np, "nxp,phase-shift", &val);
if (ret) {
dev_dbg(chip->dev,
@@ -272,7 +236,18 @@ static const struct regulator_ops pf8x00_ldo_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
-static const struct regulator_ops pf8x00_buck_ops = {
+static const struct regulator_ops pf8x00_buck1_6_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+};
+
+static const struct regulator_ops pf8x00_buck7_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -320,13 +295,41 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.regulators_node = "regulators", \
.of_parse_cb = pf8x00_of_parse_cb, \
.n_voltages = ARRAY_SIZE(voltages), \
- .ops = &pf8x00_buck_ops, \
+ .ops = &pf8x00_buck1_6_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK ## _id, \
.owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base) + SW_RUN_VOLT, \
.vsel_mask = 0xff, \
+ .curr_table = pf8x00_sw_current_table, \
+ .n_current_limits = \
+ ARRAY_SIZE(pf8x00_sw_current_table), \
+ .csel_reg = (base) + SW_CONFIG2, \
+ .csel_mask = PF8X00_SWXILIM_MASK, \
+ .enable_reg = (base) + SW_MODE1, \
+ .enable_val = 0x3, \
+ .disable_val = 0x0, \
+ .enable_mask = 0x3, \
+ .enable_time = 500, \
+ }, \
+ }
+
+#define PF8X00BUCK7(_name, base, voltages) \
+ [PF8X00_BUCK7] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .of_parse_cb = pf8x00_of_parse_cb, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_buck7_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_BUCK7, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base) + SW_RUN_VOLT, \
+ .vsel_mask = 0xff, \
.enable_reg = (base) + SW_MODE1, \
.enable_val = 0x3, \
.disable_val = 0x0, \
@@ -363,7 +366,7 @@ static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
- PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+ PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
};
@@ -458,10 +461,6 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
regmap_update_bits(chip->regmap, reg,
PF8X00_SWXPHASE_MASK,
data->phase_shift);
-
- regmap_update_bits(chip->regmap, reg,
- PF8X00_SWXILIM_MASK,
- data->ilim << PF8X00_SWXILIM_SHIFT);
}
}
--
2.25.1
Powered by blists - more mailing lists