linux-kernel - [PATCH v3 5/6] regulator: pf8x00: use linear range for buck 1-6

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210108225006.153700-6-adrien.grassein@gmail.com>
Date:   Fri,  8 Jan 2021 23:50:05 +0100
From:   Adrien Grassein <adrien.grassein@...il.com>
To:     unlisted-recipients:; (no To-header on input)
Cc:     broonie@...nel.org, jagan@...rulasolutions.com,
        lgirdwood@...il.com, robh+dt@...nel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Adrien Grassein <adrien.grassein@...il.com>
Subject: [PATCH v3 5/6] regulator: pf8x00: use linear range for buck 1-6

Use a linear range to describe the voltages of the
bucks 1-6 instead of listing it one by one (via a macro)

Signed-off-by: Adrien Grassein <adrien.grassein@...il.com>
---
 drivers/regulator/pf8x00-regulator.c | 40 +++++++---------------------
 1 file changed, 9 insertions(+), 31 deletions(-)

diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 90383e394f85..4b57f74e7326 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -147,35 +147,11 @@ static const unsigned int pf8x00_sw_current_table[] = {
 	2100000, 2600000, 3000000, 4500000,
 };
 
-#define SWV(i)		(6250 * i + 400000)
-#define SWV_LINE(i)	SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
-			SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
-
 /* Output: 0.4V to 1.8V */
-static const int pf8x00_sw1_to_6_voltages[] = {
-	SWV_LINE(0),
-	SWV_LINE(1),
-	SWV_LINE(2),
-	SWV_LINE(3),
-	SWV_LINE(4),
-	SWV_LINE(5),
-	SWV_LINE(6),
-	SWV_LINE(7),
-	SWV_LINE(8),
-	SWV_LINE(9),
-	SWV_LINE(10),
-	SWV_LINE(11),
-	SWV_LINE(12),
-	SWV_LINE(13),
-	SWV_LINE(14),
-	SWV_LINE(15),
-	SWV_LINE(16),
-	SWV_LINE(17),
-	SWV_LINE(18),
-	SWV_LINE(19),
-	SWV_LINE(20),
-	SWV_LINE(21),
-	1500000, 1800000,
+#define PF8XOO_SW1_6_VOLTAGE_NUM 0xB2
+static const struct linear_range pf8x00_sw1_to_6_voltages[] = {
+	REGULATOR_LINEAR_RANGE(400000, 0x00, 0xB0, 6250),
+	REGULATOR_LINEAR_RANGE(1800000, 0xB1, 0xB1, 0),
 };
 
 /* Output: 1.0V to 4.1V */
@@ -240,7 +216,7 @@ static const struct regulator_ops pf8x00_buck1_6_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_table,
+	.list_voltage = regulator_list_voltage_linear_range,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.get_current_limit = regulator_get_current_limit_regmap,
@@ -294,12 +270,14 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
 			.of_match = _name,			\
 			.regulators_node = "regulators",	\
 			.of_parse_cb = pf8x00_of_parse_cb,	\
-			.n_voltages = ARRAY_SIZE(voltages),	\
+			.n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM,	\
 			.ops = &pf8x00_buck1_6_ops,		\
 			.type = REGULATOR_VOLTAGE,		\
 			.id = PF8X00_BUCK ## _id,		\
 			.owner = THIS_MODULE,			\
-			.volt_table = voltages,			\
+			.linear_ranges = pf8x00_sw1_to_6_voltages, \
+			.n_linear_ranges = \
+				ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
 			.vsel_reg = (base) + SW_RUN_VOLT,	\
 			.vsel_mask = 0xff,			\
 			.curr_table = pf8x00_sw_current_table, \
-- 
2.25.1