lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 8 Jan 2021 17:45:54 +0200
From:   Claudiu Beznea <>
To:     <>, <>, <>,
        <>, <>
CC:     <>, <>,
        Claudiu Beznea <>
Subject: [PATCH] net: phy: micrel: reconfigure the phy on resume

KSZ9131 is used in setups with SAMA7G5. SAMA7G5 supports a special
power saving mode (backup mode) that cuts the power for almost all
parts of the SoC. The rail powering the ethernet PHY is also cut off.
When resuming, in case the PHY has been configured on probe with
slew rate or DLL settings these needs to be restored thus call
driver's config_init() on resume.

Signed-off-by: Claudiu Beznea <>
 drivers/net/phy/micrel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3fe552675dd2..52d3a0480158 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1077,7 +1077,7 @@ static int kszphy_resume(struct phy_device *phydev)
 	usleep_range(1000, 2000);
-	ret = kszphy_config_reset(phydev);
+	ret = phydev->drv->config_init(phydev);
 	if (ret)
 		return ret;

Powered by blists - more mailing lists