| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210109180359.236098-9-angelogioacchino.delregno@somainline.org>
Date: Sat, 9 Jan 2021 19:03:52 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>
To: linux-arm-msm@...r.kernel.org
Cc: konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
martin.botka@...ainline.org, phone-devel@...r.kernel.org,
linux-kernel@...r.kernel.org, robh+dt@...nel.org,
rjw@...ysocki.net, viresh.kumar@...aro.org, nks@...wful.org,
agross@...nel.org, bjorn.andersson@...aro.org,
daniel.lezcano@...aro.org, manivannan.sadhasivam@...aro.org,
devicetree@...r.kernel.org, linux-pm@...r.kernel.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>
Subject: [PATCH v2 08/15] dt-bindings: avs: cpr: Convert binding to YAML schema
Convert the qcom,cpr.txt document to YAML schema and place it in the
appropriate directory, since this driver was moved from power/avs
to soc/qcom, but forgets to move the documentation.
Fixes: a7305e684fcf ("PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>
---
.../bindings/power/avs/qcom,cpr.txt | 131 +-----------------
.../bindings/soc/qcom/qcom,cpr.yaml | 116 ++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 118 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
index ab0d5ebbad4e..2ada8cd08949 100644
--- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
@@ -1,130 +1 @@
-QCOM CPR (Core Power Reduction)
-
-CPR (Core Power Reduction) is a technology to reduce core power on a CPU
-or other device. Each OPP of a device corresponds to a "corner" that has
-a range of valid voltages for a particular frequency. While the device is
-running at a particular frequency, CPR monitors dynamic factors such as
-temperature, etc. and suggests adjustments to the voltage to save power
-and meet silicon characteristic requirements.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: base address and size of the rbcpr register region
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the CPR interrupt
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: phandle to the reference clock
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "ref"
-
-- vdd-apc-supply:
- Usage: required
- Value type: <phandle>
- Definition: phandle to the vdd-apc-supply regulator
-
-- #power-domain-cells:
- Usage: required
- Value type: <u32>
- Definition: should be 0
-
-- operating-points-v2:
- Usage: required
- Value type: <phandle>
- Definition: A phandle to the OPP table containing the
- performance states supported by the CPR
- power domain
-
-- acc-syscon:
- Usage: optional
- Value type: <phandle>
- Definition: phandle to syscon for writing ACC settings
-
-- nvmem-cells:
- Usage: required
- Value type: <phandle>
- Definition: phandle to nvmem cells containing the data
- that makes up a fuse corner, for each fuse corner.
- As well as the CPR fuse revision.
-
-- nvmem-cell-names:
- Usage: required
- Value type: <stringlist>
- Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
- "cpr_quotient_offset3", "cpr_init_voltage1",
- "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
- "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
- "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
- for qcs404.
-
-Example:
-
- cpr_opp_table: cpr-opp-table {
- compatible = "operating-points-v2-qcom-level";
-
- cpr_opp1: opp1 {
- opp-level = <1>;
- qcom,opp-fuse-level = <1>;
- };
- cpr_opp2: opp2 {
- opp-level = <2>;
- qcom,opp-fuse-level = <2>;
- };
- cpr_opp3: opp3 {
- opp-level = <3>;
- qcom,opp-fuse-level = <3>;
- };
- };
-
- power-controller@...8000 {
- compatible = "qcom,qcs404-cpr", "qcom,cpr";
- reg = <0x0b018000 0x1000>;
- interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xo_board>;
- clock-names = "ref";
- vdd-apc-supply = <&pms405_s3>;
- #power-domain-cells = <0>;
- operating-points-v2 = <&cpr_opp_table>;
- acc-syscon = <&tcsr>;
-
- nvmem-cells = <&cpr_efuse_quot_offset1>,
- <&cpr_efuse_quot_offset2>,
- <&cpr_efuse_quot_offset3>,
- <&cpr_efuse_init_voltage1>,
- <&cpr_efuse_init_voltage2>,
- <&cpr_efuse_init_voltage3>,
- <&cpr_efuse_quot1>,
- <&cpr_efuse_quot2>,
- <&cpr_efuse_quot3>,
- <&cpr_efuse_ring1>,
- <&cpr_efuse_ring2>,
- <&cpr_efuse_ring3>,
- <&cpr_efuse_revision>;
- nvmem-cell-names = "cpr_quotient_offset1",
- "cpr_quotient_offset2",
- "cpr_quotient_offset3",
- "cpr_init_voltage1",
- "cpr_init_voltage2",
- "cpr_init_voltage3",
- "cpr_quotient1",
- "cpr_quotient2",
- "cpr_quotient3",
- "cpr_ring_osc1",
- "cpr_ring_osc2",
- "cpr_ring_osc3",
- "cpr_fuse_revision";
- };
+This file has been moved to ../../soc/qcom/qcom,cpr.yaml
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
new file mode 100644
index 000000000000..619d2554f146
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Core Power Reduction (CPR)
+
+description: |
+ CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+ or other device. Each OPP of a device corresponds to a "corner" that has
+ a range of valid voltages for a particular frequency. While the device is
+ running at a particular frequency, CPR monitors dynamic factors such as
+ temperature, etc. and suggests adjustments to the voltage to save power
+ and meet silicon characteristic requirements.
+
+maintainers:
+ - Niklas Cassel <nks@...wful.org>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,qcs404-cpr
+ - const: qcom,cpr
+
+ reg:
+ description: Base address and size of the RBCPR register region
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ref
+
+ clocks:
+ items:
+ - description: CPR reference clock
+
+ vdd-apc-supply:
+ description: Autonomous Phase Control (APC) power supply
+
+ '#power-domain-cells':
+ const: 0
+
+ acc-syscon:
+ description: phandle to syscon for writing ACC settings
+
+ nvmem-cells:
+ minItems: 9
+ description: Cells containing the fuse corners and revision data
+
+ nvmem-cell-names:
+ minItems: 9
+
+ operating-points-v2: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - vdd-apc-supply
+ - "#power-domain-cells"
+ - nvmem-cells
+ - nvmem-cell-names
+ - operating-points-v2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ power-controller@...8000 {
+ compatible = "qcom,qcs404-cpr", "qcom,cpr";
+ reg = <0x0b018000 0x1000>;
+ interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xo_board>;
+ clock-names = "ref";
+ vdd-apc-supply = <&pms405_s3>;
+ #power-domain-cells = <0>;
+ operating-points-v2 = <&cpr_opp_table>;
+ acc-syscon = <&tcsr>;
+
+ nvmem-cells = <&cpr_efuse_quot_offset1>,
+ <&cpr_efuse_quot_offset2>,
+ <&cpr_efuse_quot_offset3>,
+ <&cpr_efuse_init_voltage1>,
+ <&cpr_efuse_init_voltage2>,
+ <&cpr_efuse_init_voltage3>,
+ <&cpr_efuse_quot1>,
+ <&cpr_efuse_quot2>,
+ <&cpr_efuse_quot3>,
+ <&cpr_efuse_ring1>,
+ <&cpr_efuse_ring2>,
+ <&cpr_efuse_ring3>,
+ <&cpr_efuse_revision>;
+ nvmem-cell-names = "cpr_quotient_offset1",
+ "cpr_quotient_offset2",
+ "cpr_quotient_offset3",
+ "cpr_init_voltage1",
+ "cpr_init_voltage2",
+ "cpr_init_voltage3",
+ "cpr_quotient1",
+ "cpr_quotient2",
+ "cpr_quotient3",
+ "cpr_ring_osc1",
+ "cpr_ring_osc2",
+ "cpr_ring_osc3",
+ "cpr_fuse_revision";
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 3da6d8c154e4..c8c006f08dcc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14458,7 +14458,7 @@ M: Niklas Cassel <nks@...wful.org>
L: linux-pm@...r.kernel.org
L: linux-arm-msm@...r.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+F: Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
F: drivers/soc/qcom/cpr.c
QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
--
2.29.2
Powered by blists - more mailing lists