[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <X/kKmCUuMTsNl/1n@pendragon.ideasonboard.com>
Date: Sat, 9 Jan 2021 03:44:56 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Robert Foss <robert.foss@...aro.org>
Cc: agross@...nel.org, bjorn.andersson@...aro.org, todor.too@...il.com,
mchehab@...nel.org, robh+dt@...nel.org, catalin.marinas@....com,
will@...nel.org, shawnguo@...nel.org, leoyang.li@....com,
geert+renesas@...der.be, arnd@...db.de, Anson.Huang@....com,
michael@...le.cc, agx@...xcpu.org, max.oss.09@...il.com,
linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
AngeloGioacchino Del Regno <kholk11@...il.com>,
Andrey Konovalov <andrey.konovalov@...aro.org>,
Tomasz Figa <tfiga@...omium.org>,
Azam Sadiq Pasha Kapatrala Syed <akapatra@...cinc.com>,
Sarvesh Sridutt <Sarvesh.Sridutt@...rtwirelesscompute.com>
Subject: Re: [PATCH v1 12/17] media: dt-bindings: media: qcom,camss: Add
bindings for SDM845 camss
Hi Rob,
Thank you for the patch.
On Fri, Jan 08, 2021 at 01:04:24PM +0100, Robert Foss wrote:
> Add bindings for qcom,sdm845-camss in order to support the camera
> subsystem on SDM845.
>
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
> .../devicetree/bindings/media/qcom,camss.txt | 51 +++++++++++++++----
> 1 file changed, 40 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
> index 498234629e21..276c5d0c25cb 100644
> --- a/Documentation/devicetree/bindings/media/qcom,camss.txt
> +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt
> @@ -9,6 +9,7 @@ Qualcomm Camera Subsystem
> - "qcom,msm8916-camss"
> - "qcom,msm8996-camss"
> - "qcom,sdm660-camss"
> + - "qcom,sdm845-camss"
> - reg:
> Usage: required
> Value type: <prop-encoded-array>
> @@ -18,19 +19,21 @@ Qualcomm Camera Subsystem
> Value type: <stringlist>
> Definition: Should contain the following entries:
> - "csiphy0"
> - - "csiphy0_clk_mux"
> + - "csiphy0_clk_mux" (not 845)
> - "csiphy1"
> - - "csiphy1_clk_mux"
> - - "csiphy2" (8996 only)
> + - "csiphy1_clk_mux" (not 845)
> + - "csiphy2" (8996 & 845)
> - "csiphy2_clk_mux" (8996 only)
> + - "csiphy3" (845 only)
> - "csid0"
> - "csid1"
> - - "csid2" (8996 only)
> - - "csid3" (8996 only)
> + - "csid2" (8996 & 845)
> + - "csid3" (8996 & 845)
> - "ispif"
> - - "csi_clk_mux"
> + - "csi_clk_mux" (not 845)
> - "vfe0"
> - - "vfe1" (8996 only)
> + - "vfe1" (8996 & 845)
> + - "vfe_lite" (845 only)
All this would be more readable after a conversion to YAML ;-)
> - interrupts:
> Usage: required
> Value type: <prop-encoded-array>
> @@ -41,14 +44,16 @@ Qualcomm Camera Subsystem
> Definition: Should contain the following entries:
> - "csiphy0"
> - "csiphy1"
> - - "csiphy2" (8996 only)
> + - "csiphy2" (8996 & 845)
> + - "csiphy3" (845 only)
> - "csid0"
> - "csid1"
> - - "csid2" (8996 only)
> + - "csid2" (8996 & 845)
> - "csid3" (8996 only)
> - "ispif"
> - "vfe0"
> - - "vfe1" (8996 only)
> + - "vfe1" (8996 & 845)
> + - "vfe_lite" (845 only)
> - power-domains:
> Usage: required
> Value type: <prop-encoded-array>
> @@ -67,27 +72,40 @@ Qualcomm Camera Subsystem
> - "top_ahb"
> - "throttle_axi" (660 only)
> - "ispif_ahb"
> + - "camnoc_axi" (845 only)
> + - "cpas_ahb" (845 only)
> + - "cphy_rx_src" (856 only)
> - "csiphy0_timer"
> + - "csiphy0" (845 only)
> + - "csiphy0_timer_src" (845 only)
> - "csiphy1_timer"
> - - "csiphy2_timer" (8996 only)
> + - "csiphy2" (845 only)
> + - "csiphy2_timer_src" (845 only)
> + - "csiphy2_timer" (8996 & 845)
> + - "csiphy3" (845 only)
> + - "csiphy3_timer_src" (845 only)
> + - "csiphy3_timer" (845 only)
> - "csiphy_ahb2crif" (660 only)
> - "csi0_ahb"
> - "csi0"
> - "csi0_phy"
> - "csi0_pix"
> - "csi0_rdi"
> + - "csi0_src" (845 only)
> - "cphy_csid0" (660 only)
> - "csi1_ahb"
> - "csi1"
> - "csi1_phy"
> - "csi1_pix"
> - "csi1_rdi"
> + - "csi1_src" (845 only)
> - "cphy_csid1" (660 only)
> - "csi2_ahb" (8996 only)
> - "csi2" (8996 only)
> - "csi2_phy" (8996 only)
> - "csi2_pix" (8996 only)
> - "csi2_rdi" (8996 only)
> + - "csi2_src" (845 only)
> - "cphy_csid2" (660 only)
> - "csi3_ahb" (8996 only)
> - "csi3" (8996 only)
> @@ -96,14 +114,25 @@ Qualcomm Camera Subsystem
> - "csi3_rdi" (8996 only)
> - "cphy_csid3" (660 only)
> - "ahb"
> + - "slow_ahb_src" (845 only)
> + - "soc_ahb" (845 only)
> - "vfe0"
> - "csi_vfe0"
> - "vfe0_ahb", (8996 only)
> + - "vfe0_cphy_rx" (845 only)
> + - "vfe0_axi", (845 only)
> + - "vfe0_src", (845 only)
> - "vfe0_stream", (8996 only)
> - "vfe1", (8996 only)
> - "csi_vfe1", (8996 only)
> - "vfe1_ahb", (8996 only)
> + - "vfe1_cphy_rx" (845 only)
> + - "vfe1_axi", (845 only)
> + - "vfe1_src", (845 only)
> - "vfe1_stream", (8996 only)
> + - "vfe_lite_axi", (845 only)
> + - "vfe_lite_cphy_rx" (845 only)
> + - "vfe_lite_src", (845 only)
> - "vfe_ahb"
> - "vfe_axi"
> - vdda-supply:
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists