[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210110113826.1257293-1-aford173@gmail.com>
Date: Sun, 10 Jan 2021 05:38:26 -0600
From: Adam Ford <aford173@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: aford@...conembedded.com, Adam Ford <aford173@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1
The WiFi chip is capable of communication at SDR104 speeds.
Enable 100Mhz and 200MHz pinmux to support this.
Signed-off-by: Adam Ford <aford173@...il.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index d897913537ca..988f8ab679ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -256,8 +256,10 @@ bluetooth {
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;
--
2.25.1
Powered by blists - more mailing lists