lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aa84c8e0-3922-cc59-7c11-663bde0d2ed8@codeaurora.org>
Date:   Mon, 11 Jan 2021 21:28:01 +0530
From:   Maulik Shah <mkshah@...eaurora.org>
To:     Douglas Anderson <dianders@...omium.org>,
        Marc Zyngier <maz@...nel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Linus Walleij <linus.walleij@...aro.org>
Cc:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Neeraj Upadhyay <neeraju@...eaurora.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        Stephen Boyd <swboyd@...omium.org>, linux-gpio@...r.kernel.org,
        Srinivas Ramana <sramana@...eaurora.org>,
        linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 2/4] pinctrl: qcom: No need to read-modify-write the
 interrupt status

Hi Doug,

Reviewed-by: Maulik Shah <mkshah@...eaurora.org>
Tested-by: Maulik Shah <mkshah@...eaurora.org>

Thanks,
Maulik

On 1/8/2021 11:05 PM, Douglas Anderson wrote:
> When the Qualcomm pinctrl driver wants to Ack an interrupt, it does a
> read-modify-write on the interrupt status register.  On some SoCs it
> makes sure that the status bit is 1 to "Ack" and on others it makes
> sure that the bit is 0 to "Ack".  Presumably the first type of
> interrupt controller is a "write 1 to clear" type register and the
> second just let you directly set the interrupt status register.
>
> As far as I can tell from scanning structure definitions, the
> interrupt status bit is always in a register by itself.  Thus with
> both types of interrupt controllers it is safe to "Ack" interrupts
> without doing a read-modify-write.  We can do a simple write.
>
> It should be noted that if the interrupt status bit _was_ ever in a
> register with other things (like maybe status bits for other GPIOs):
> a) For "write 1 clear" type controllers then read-modify-write would
>     be totally wrong because we'd accidentally end up clearing
>     interrupts we weren't looking at.
> b) For "direct set" type controllers then read-modify-write would also
>     be wrong because someone setting one of the other bits in the
>     register might accidentally clear (or set) our interrupt.
> I say this simply to show that the current read-modify-write doesn't
> provide any sort of "future proofing" of the code.  In fact (for
> "write 1 clear" controllers) the new code is slightly more "future
> proof" since it would allow more than one interrupt status bits to
> share a register.
>
> NOTE: this code fixes no bugs--it simply avoids an extra register
> read.
>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> ---
>
> Changes in v5:
> - ("pinctrl: qcom: No need to read-modify-write the ...") new for v5.
>
>   drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++---------------
>   1 file changed, 8 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 1d2a78452c2d..1787ada6bfab 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -792,16 +792,13 @@ static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
>   
>   	raw_spin_lock_irqsave(&pctrl->lock, flags);
>   
> -	if (status_clear) {
> -		/*
> -		 * clear the interrupt status bit before unmask to avoid
> -		 * any erroneous interrupts that would have got latched
> -		 * when the interrupt is not in use.
> -		 */
> -		val = msm_readl_intr_status(pctrl, g);
> -		val &= ~BIT(g->intr_status_bit);
> -		msm_writel_intr_status(val, pctrl, g);
> -	}
> +	/*
> +	 * clear the interrupt status bit before unmask to avoid
> +	 * any erroneous interrupts that would have got latched
> +	 * when the interrupt is not in use.
> +	 */
> +	if (status_clear)
> +		msm_writel_intr_status(0, pctrl, g);
>   
>   	val = msm_readl_intr_cfg(pctrl, g);
>   	val |= BIT(g->intr_raw_status_bit);
> @@ -906,11 +903,7 @@ static void msm_gpio_irq_ack(struct irq_data *d)
>   
>   	raw_spin_lock_irqsave(&pctrl->lock, flags);
>   
> -	val = msm_readl_intr_status(pctrl, g);
> -	if (g->intr_ack_high)
> -		val |= BIT(g->intr_status_bit);
> -	else
> -		val &= ~BIT(g->intr_status_bit);
> +	val = (g->intr_ack_high) ? BIT(g->intr_status_bit) : 0;
>   	msm_writel_intr_status(val, pctrl, g);
>   
>   	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ