Message-ID: <X/x49o3EtrUh6vuO@ulmo>
Date:   Mon, 11 Jan 2021 17:12:38 +0100
From:   Thierry Reding <treding@...dia.com>
To:     "Rafael J. Wysocki" <rafael@...nel.org>
CC:     Hugh Dickins <hughd@...gle.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Saravana Kannan <saravanak@...gle.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Vincent Huang <vincent.huang@...synaptics.com>,
        "Jason A. Donenfeld" <Jason@...c4.com>,
        Andrew Duggan <aduggan@...aptics.com>,
        Lucas Stach <l.stach@...gutronix.de>,
        "Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
        Linux PM <linux-pm@...r.kernel.org>
Subject: Re: 5.11-rc device reordering breaks ThinkPad rmi4 suspend

On Mon, Jan 11, 2021 at 03:57:37PM +0100, Rafael J. Wysocki wrote:
> On Mon, Jan 11, 2021 at 2:43 PM Thierry Reding <treding@...dia.com> wrote:
> >
> > On Sun, Jan 10, 2021 at 08:44:13PM -0800, Hugh Dickins wrote:
> > > Hi Rafael,
> > >
> > > Synaptics RMI4 SMBus touchpad on ThinkPad X1 Carbon (5th generation)
> > > fails to suspend when running 5.11-rc kernels: bisected to
> > > 5b6164d3465f ("driver core: Reorder devices on successful probe"),
> > > and reverting that fixes it.  dmesg.xz attached, but go ahead and ask
> > > me to switch on a debug option to extract further info if that may help.
> >
> > Hi Hugh,
> >
> > Quoting what I think are the relevant parts of that log:
> >
> > [   34.373742] printk: Suspending console(s) (use no_console_suspend to debug)
> > [   34.429015] rmi4_physical rmi4-00: Failed to read irqs, code=-6
> > [   34.474973] rmi4_f01 rmi4-00.fn01: Failed to write sleep mode: -6.
> > [   34.474994] rmi4_f01 rmi4-00.fn01: Suspend failed with code -6.
> > [   34.475001] rmi4_physical rmi4-00: Failed to suspend functions: -6
> > [   34.475105] rmi4_smbus 6-002c: Failed to suspend device: -6
> > [   34.475113] PM: dpm_run_callback(): rmi_smb_suspend+0x0/0x3c returns -6
> > [   34.475130] PM: Device 6-002c failed to suspend: error -6
> > [   34.475187] PM: Some devices failed to suspend, or early wake event detected
> > [   34.480324] rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-6).
> > [   34.480748] rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-6).
> > [   34.481558] rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
> > [   34.487935] acpi LNXPOWER:02: Turning OFF
> > [   34.488707] acpi LNXPOWER:01: Turning OFF
> > [   34.489554] rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
> > [   34.489669] psmouse: probe of serio2 failed with error -1
> > [   34.489882] OOM killer enabled.
> > [   34.489891] Restarting tasks ... done.
> > [   34.589183] PM: suspend exit
> > [   34.589839] PM: suspend entry (s2idle)
> > [   34.605884] Filesystems sync: 0.017 seconds
> > [   34.607594] Freezing user space processes ... (elapsed 0.006 seconds) done.
> > [   34.613645] OOM killer disabled.
> > [   34.613650] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> > [   34.615482] printk: Suspending console(s) (use no_console_suspend to debug)
> > [   34.653097] rmi4_f01 rmi4-00.fn01: Failed to write sleep mode: -6.
> > [   34.653108] rmi4_f01 rmi4-00.fn01: Suspend failed with code -6.
> > [   34.653115] rmi4_physical rmi4-00: Failed to suspend functions: -6
> > [   34.653123] rmi4_smbus 6-002c: Failed to suspend device: -6
> > [   34.653129] PM: dpm_run_callback(): rmi_smb_suspend+0x0/0x3c returns -6
> > [   34.653160] PM: Device 6-002c failed to suspend: error -6
> > [   34.653174] PM: Some devices failed to suspend, or early wake event detected
> > [   34.660515] OOM killer enabled.
> > [   34.660524] Restarting tasks ...
> > [   34.661456] rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
> > [   34.661591] psmouse: probe of serio2 failed with error -1
> > [   34.669469] done.
> > [   34.748386] PM: suspend exit
> >
> > I think what might be happening here is that the offending patch causes
> > some devices to be reordered in a way different to how they were ordered
> > originally and the rmi4 driver currently depends on that implicit order.
> 
> Actually, the only possible case in which the commit in question can
> introduce suspend failures like this is when some dependency
> information is missing and so the reordering causes the ordering to
> change from the (working) implicit one.
> 
> > Interestingly one of the bugs that the offending patch fixes is similar
> > in the failure mode but for the reverse reason: the implicit order
> > causes suspend/resume to fail.
> 
> And that happens because some dependency information is missing.
> 
> So we have failing cases when dependency information is missing, so
> instead of fixing those we have tried to make the core change the
> ordering after every successful probe in the hope that this will take
> care of the problem without introducing new breakage.
> 
> However, it evidently has introduced new breakage and in order to fix
> it we need to figure out what dependency information is missing in the
> failing cases and put that information in, but we may as well do the
> same for the cases that are failing without the offending change.
> 
> So why don't we revert the commit in question and do just that?

Unfortunately it isn't that easy. In fact, all the dependency
information already exists in the case that I cited in 5b6164d3465f
("driver core: Reorder devices on successful probe"), but it's the
driver core that suspends/resumes the devices in the wrong order.

The reason is because the ACONNECT device depends on the BPMP device
(via a power-domains property), but it's also instantiated before the
BPMP device (because it is listed earlier in device tree, which is
sorted by unit-address first, then alphabetically). BPMP being a CPU
non-addressable device it doesn't have a unit-address and hence is
listed very late in device tree (by convention). Normally this is would
not be a problem because deferred probe would take care of it. But there
is one corner-case which happens when the BPMP is built into the kernel
(which it usually is, as it provides access to resources necessary for
booting, such as clocks and resets) and ACONNECT is built as a loadable
module. In that case, BPMP gets probed before ACONNECT and hence when
ACONNECT does eventually get loaded, the BPMP is already there, meaning
ACONNECT won't defer probe and hence the DPM suspend/resume order is not
fixed up by the deferred probe code.

And that's precisely what the offending commit addresses. However, the
downside is, and we did discuss this during review, that it operates
under the (somewhat optimistic) assumption that all the dependency
information exists. This is because reordering on successful probe can
potentially introduce regressions for dependencies that were previously
implicit. So if a system has component B that depends on component A but
doesn't model that dependency via some child/parent relationship or an
explicit relationship that would be flagged by deferred probe, then this
implicit dependency can break by the new reordering on successful probe.

I very much suspect that that's exactly what's going on here. This RMI4
device very likely implicitly depends on some other resource getting
enabled but doesn't properly model that dependency. If we find out what
that dependency is and return -EPROBE_DEFER when that dependency has not
probed yet, then deferred probe will automatically take care of ordering
everything correctly again (or, in fact, ordering by successful probe
will take care of it already because RMI4 would initially fail with
-EPROBE_DEFER).

Adding Vincent, Jason, Andrew and Lucas (who have recently worked on
this driver), perhaps they have some better understanding of what
missing dependencies might be causing the above errors.

Thierry

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists