lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Tue, 12 Jan 2021 19:02:54 +0100
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>
To:     linux-arm-msm@...r.kernel.org
Cc:     konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
        martin.botka@...ainline.org, phone-devel@...r.kernel.org,
        robdclark@...il.com, sean@...rly.run,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 9/9] drm/msm/dpu: Fix timeout issues on command mode
 panels

Il 09/01/21 14:37, AngeloGioacchino Del Regno ha scritto:
> In function dpu_encoder_phys_cmd_wait_for_commit_done we are always
> checking if the relative CTL is started by waiting for an interrupt
> to fire: it is fine to do that, but then sometimes we call this
> function while the CTL is up and has never been put down, but that
> interrupt gets raised only when the CTL gets a state change from
> 0 to 1 (disabled to enabled), so we're going to wait for something
> that will never happen on its own.
> 
> Solving this while avoiding to restart the CTL is actually possible
> and can be done by just checking if it is already up and running
> when the wait_for_commit_done function is called: in this case, so,
> if the CTL was already running, we can say that the commit is done
> if the command transmission is complete (in other terms, if the
> interface has been flushed).
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 2311e98480b9..0624864da343 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -695,6 +695,9 @@ static int dpu_encoder_phys_cmd_wait_for_commit_done(
>   	if (!dpu_encoder_phys_cmd_is_master(phys_enc))
>   		return 0;
>   
> +	if (phys_enc->hw_ctl->ops.is_started)
> +		return dpu_encoder_phys_cmd_wait_for_tx_complete(phys_enc);
> +
>   	return _dpu_encoder_phys_cmd_wait_for_ctl_start(phys_enc);
>   }
>   
> 

Sorry, this patch is obviously faulty, Took it from the wrong local 
tree. I will send a V2.

Powered by blists - more mailing lists