| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210112093329.3639-3-martin.kepplinger@puri.sm>
Date: Tue, 12 Jan 2021 10:33:28 +0100
From: Martin Kepplinger <martin.kepplinger@...i.sm>
To: jejb@...ux.ibm.com, martin.petersen@...cle.com,
stern@...land.harvard.edu, bvanassche@....org
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
Martin Kepplinger <martin.kepplinger@...i.sm>
Subject: [PATCH v2 2/3] scsi: sd: add ignore_resume_medium_changed disk setting
Add a userspace knob for scsi disks that deliver a MEDIA CHANGED
unit attention when the device actually only resumes from (runtime) suspend.
Those devices need the new ignore_resume_medium_changed knob set to 1
in order to be able to use runtime PM.
To enable runtime PM for an SD cardreader (here, device number 0:0:0:0),
do the following:
echo 0 > /sys/module/block/parameters/events_dfl_poll_msecs
echo 1000 > /sys/bus/scsi/devices/0:0:0:0/power/autosuspend_delay_ms
echo auto > /sys/bus/scsi/devices/0:0:0:0/power/control
Set ignore_resume_medium_changed to 1 if you experience this problem.
Otherwise the unit attention would trigger I/O failure like the following
when using the mounted disk:
[ 167.603864] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00
driverbyte=0x08 cmd_age=0s
[ 167.603892] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x6 [current]
[ 167.603899] sd 0:0:0:0: [sda] tag#0 ASC=0x28 ASCQ=0x0
[ 167.603909] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 01 c4 08 98 00 00 10 00
[ 167.603915] blk_update_request: I/O error, dev sda, sector 29624472 op
0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0
[ 167.614750] Aborting journal on device sda1-8.
[ 167.619460] sd 0:0:0:0: [sda] tag#0 device offline or changed
[ 167.625342] blk_update_request: I/O error, dev sda, sector 29624320 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 167.636161] Buffer I/O error on dev sda1, logical block 3702784, lost sync page write
[ 167.644132] JBD2: Error -5 detected when updating journal superblock for sda1-8.
Signed-off-by: Martin Kepplinger <martin.kepplinger@...i.sm>
---
drivers/scsi/sd.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++-
drivers/scsi/sd.h | 1 +
2 files changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a3d2d4bc4a3d..14b850d2af59 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -114,6 +114,7 @@ static void sd_shutdown(struct device *);
static int sd_suspend_system(struct device *);
static int sd_suspend_runtime(struct device *);
static int sd_resume(struct device *);
+static int sd_resume_runtime(struct device *);
static void sd_rescan(struct device *);
static blk_status_t sd_init_command(struct scsi_cmnd *SCpnt);
static void sd_uninit_command(struct scsi_cmnd *SCpnt);
@@ -375,6 +376,33 @@ thin_provisioning_show(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_RO(thin_provisioning);
+static ssize_t
+ignore_resume_medium_changed_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return sprintf(buf, "%u\n", sdkp->ignore_resume_medium_changed);
+}
+
+static ssize_t
+ignore_resume_medium_changed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ bool v;
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (kstrtobool(buf, &v))
+ return -EINVAL;
+
+ sdkp->ignore_resume_medium_changed = v;
+
+ return count;
+}
+static DEVICE_ATTR_RW(ignore_resume_medium_changed);
+
/* sysfs_match_string() requires dense arrays */
static const char *lbp_mode[] = {
[SD_LBP_FULL] = "full",
@@ -591,6 +619,7 @@ static struct attribute *sd_disk_attrs[] = {
&dev_attr_max_medium_access_timeouts.attr,
&dev_attr_zoned_cap.attr,
&dev_attr_max_retries.attr,
+ &dev_attr_ignore_resume_medium_changed.attr,
NULL,
};
ATTRIBUTE_GROUPS(sd_disk);
@@ -608,7 +637,7 @@ static const struct dev_pm_ops sd_pm_ops = {
.poweroff = sd_suspend_system,
.restore = sd_resume,
.runtime_suspend = sd_suspend_runtime,
- .runtime_resume = sd_resume,
+ .runtime_resume = sd_resume_runtime,
};
static struct scsi_driver sd_template = {
@@ -3699,6 +3728,25 @@ static int sd_resume(struct device *dev)
return ret;
}
+static int sd_resume_runtime(struct device *dev)
+{
+ struct scsi_disk *sdkp = dev_get_drvdata(dev);
+ int ret;
+
+ if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
+ return 0;
+
+ /*
+ * ignore_resume_media_change is the userspace setting and
+ * expecting_media_change is what is checked and cleared in the
+ * error path if we set it here.
+ */
+ if (sdkp->ignore_resume_medium_changed)
+ sdkp->device->expecting_media_change = 1;
+
+ return sd_resume(dev);
+}
+
/**
* init_sd - entry point for this driver (both when built in or when
* a module).
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index b59136c4125b..1b041331356c 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -125,6 +125,7 @@ struct scsi_disk {
unsigned urswrz : 1;
unsigned security : 1;
unsigned ignore_medium_access_errors : 1;
+ unsigned ignore_resume_medium_changed : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
--
2.20.1
Powered by blists - more mailing lists