| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFru7X1Wi3EUBoy-EVaxJ+-rTdhhtArJ9P5RC1ZMak9U+A@mail.gmail.com>
Date: Tue, 12 Jan 2021 11:09:31 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>,
Danny Lin <danny@...ag0n.dev>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Lina Iyer <ilina@...eaurora.org>
Subject: Re: [PATCH] arm64: dts: qcom: sm8150: Add support for deep CPU
cluster idle
+ Lina
On Wed, 6 Jan 2021 at 00:05, Bjorn Andersson <bjorn.andersson@...aro.org> wrote:
>
> On Tue 05 Jan 12:10 PST 2021, Danny Lin wrote:
>
> > This commit adds support for deep idling of the entire unified DynamIQ
> > CPU cluster on sm8150. In this idle state, the LLCC (Last-Level Cache
> > Controller) is powered off and the AOP (Always-On Processor) enters a
> > low-power sleep state.
> >
> > I'm not sure what the per-CPU 0x400000f4 idle state previously
> > contributed by Qualcomm as the "cluster sleep" state is, but the
> > downstream kernel has no such state. The real deep cluster idle state
> > is 0x41000c244, composed of:
> >
> > Cluster idle state: (0xc24) << 4 = 0xc240
> > Is reset state: 1 << 30 = 0x40000000
> > Affinity level: 1 << 24 = 0x1000000
> > CPU idle state: 0x4 (power collapse)
> >
> > This setup can be replicated with the PSCI power domain cpuidle driver,
> > which utilizes OSI to enter cluster idle when the last active CPU
> > enters idle.
> >
> > The cluster idle state cannot be used as a plain cpuidle state because
> > it requires that all CPUs in the cluster are idling.
> >
>
> This looks quite reasonable to me.
>
> @Ulf, this seems to be the first attempt at wiring up the domain idle
> pieces upstream, would you mind having a look?
Certainly I can have a look, but I could find the original posted
patch. I had a look at the below changes and it looks good to me. Feel
free to add my reviewed-by tag for it.
Also note, the db410c was the first one to support this as introduced
in commit e37131556801 for v5.6. You may have a look at
arch/arm64/boot/dts/qcom/msm8916.dtsi.
Kind regards
Uffe
>
> The SM8150 pretty much identical to RB3 in this regard.
>
> Regards,
> Bjorn
>
> > Signed-off-by: Danny Lin <danny@...ag0n.dev>
> > ---
> > arch/arm64/boot/dts/qcom/sm8150.dtsi | 91 ++++++++++++++++++++++------
> > 1 file changed, 73 insertions(+), 18 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > index 309e00b6fa44..8956c6986744 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > @@ -52,10 +52,10 @@ CPU0: cpu@0 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <488>;
> > dynamic-power-coefficient = <232>;
> > - cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_0>;
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > + power-domains = <&CPU_PD0>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_0: l2-cache {
> > compatible = "cache";
> > @@ -73,10 +73,10 @@ CPU1: cpu@100 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <488>;
> > dynamic-power-coefficient = <232>;
> > - cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_100>;
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > + power-domains = <&CPU_PD1>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_100: l2-cache {
> > compatible = "cache";
> > @@ -92,10 +92,10 @@ CPU2: cpu@200 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <488>;
> > dynamic-power-coefficient = <232>;
> > - cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_200>;
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > + power-domains = <&CPU_PD2>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_200: l2-cache {
> > compatible = "cache";
> > @@ -110,10 +110,10 @@ CPU3: cpu@300 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <488>;
> > dynamic-power-coefficient = <232>;
> > - cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_300>;
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > + power-domains = <&CPU_PD3>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_300: l2-cache {
> > compatible = "cache";
> > @@ -128,10 +128,10 @@ CPU4: cpu@400 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <369>;
> > - cpu-idle-states = <&BIG_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_400>;
> > qcom,freq-domain = <&cpufreq_hw 1>;
> > + power-domains = <&CPU_PD4>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_400: l2-cache {
> > compatible = "cache";
> > @@ -146,10 +146,10 @@ CPU5: cpu@500 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <369>;
> > - cpu-idle-states = <&BIG_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_500>;
> > qcom,freq-domain = <&cpufreq_hw 1>;
> > + power-domains = <&CPU_PD5>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_500: l2-cache {
> > compatible = "cache";
> > @@ -164,10 +164,10 @@ CPU6: cpu@600 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <369>;
> > - cpu-idle-states = <&BIG_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_600>;
> > qcom,freq-domain = <&cpufreq_hw 1>;
> > + power-domains = <&CPU_PD6>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_600: l2-cache {
> > compatible = "cache";
> > @@ -182,10 +182,10 @@ CPU7: cpu@700 {
> > enable-method = "psci";
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <421>;
> > - cpu-idle-states = <&BIG_CPU_SLEEP_0
> > - &CLUSTER_SLEEP_0>;
> > next-level-cache = <&L2_700>;
> > qcom,freq-domain = <&cpufreq_hw 2>;
> > + power-domains = <&CPU_PD7>;
> > + power-domain-names = "psci";
> > #cooling-cells = <2>;
> > L2_700: l2-cache {
> > compatible = "cache";
> > @@ -251,11 +251,13 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
> > min-residency-us = <4488>;
> > local-timer-stop;
> > };
> > + };
> >
> > + domain-idle-states {
> > CLUSTER_SLEEP_0: cluster-sleep-0 {
> > - compatible = "arm,idle-state";
> > + compatible = "domain-idle-state";
> > idle-state-name = "cluster-power-collapse";
> > - arm,psci-suspend-param = <0x400000F4>;
> > + arm,psci-suspend-param = <0x4100c244>;
> > entry-latency-us = <3263>;
> > exit-latency-us = <6562>;
> > min-residency-us = <9987>;
> > @@ -291,6 +293,59 @@ pmu {
> > psci {
> > compatible = "arm,psci-1.0";
> > method = "smc";
> > +
> > + CPU_PD0: cpu0 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD1: cpu1 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD2: cpu2 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD3: cpu3 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD4: cpu4 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&BIG_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD5: cpu5 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&BIG_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD6: cpu6 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&BIG_CPU_SLEEP_0>;
> > + };
> > +
> > + CPU_PD7: cpu7 {
> > + #power-domain-cells = <0>;
> > + power-domains = <&CLUSTER_PD>;
> > + domain-idle-states = <&BIG_CPU_SLEEP_0>;
> > + };
> > +
> > + CLUSTER_PD: cpu-cluster0 {
> > + #power-domain-cells = <0>;
> > + domain-idle-states = <&CLUSTER_SLEEP_0>;
> > + };
> > };
> >
> > reserved-memory {
> > --
> > 2.29.2
> >
Powered by blists - more mailing lists