[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210113163048.GV2771@vkoul-mobl>
Date: Wed, 13 Jan 2021 22:00:48 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Peter Ujfalusi <peter.ujfalusi@...il.com>
Cc: dan.j.williams@...el.com, linux-kernel@...r.kernel.org,
dmaengine@...r.kernel.org, vigneshr@...com,
grygorii.strashko@...com, kishon@...com
Subject: Re: [PATCH v2 0/3] dmaengine: ti: k3-udma: memcpy throughput
improvement
On 13-01-21, 13:49, Peter Ujfalusi wrote:
> Hi,
>
> Changes since v1:
> - Added Kishon's tested-by to the first two patch
> - Moved the variable definitions to the start of their respective functions
> - Remove braces where they are not needed
> - correct indentation of cases
> - additional patch to clean up the ret = 0 initializations in tisci channel configuration
> functions, no functional changes.
>
> Newer members of the KS3 family (after AM654) have support for burst_size
> configuration for each DMA channel.
>
> The HW default value is 64 bytes but on higher throughput channels it can be
> increased to 256 bytes (UCHANs) or 128 byes (HCHANs).
>
> Aligning the buffers and length of the transfer to the burst size also increases
> the throughput.
>
> Numbers gathered on j721e (UCHAN pair):
> echo 8000000 > /sys/module/dmatest/parameters/test_buf_size
> echo 2000 > /sys/module/dmatest/parameters/timeout
> echo 50 > /sys/module/dmatest/parameters/iterations
> echo 1 > /sys/module/dmatest/parameters/max_channels
>
> Prior to this patch: ~1.3 GB/s
> After this patch: ~1.8 GB/s
> with 1 byte alignment: ~1.7 GB/s
Applied, thanks
--
~Vinod
Powered by blists - more mailing lists