lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210113182934.444727-1-angelogioacchino.delregno@somainline.org>
Date:   Wed, 13 Jan 2021 19:29:32 +0100
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>
To:     mchehab@...nel.org
Cc:     robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
        linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
        konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
        martin.botka@...ainline.org,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>
Subject: [PATCH v4 0/2] Add support for the Sony Exmor-RS IMX300 camera sensor

This patch series adds support for the IMX300 camera sensor, (one of the)
first Exmor-RS Stacked CMOS sensor(s), with support for both of the
supported aspect ratios (4:3 and 16:9).
This driver came out from reverse engineering of so called "userspace
drivers" from Sony Xperia smartphones.

I tried to document all of my findings and giving a sense to the registers
as much as possible, but that was only partially possible and resembles
some names from the IMX219 public datasheet, even though the addresses are
basically completely different.

This camera sensor driver was tested with all the resolutions declared in
it on two phones: Sony Xperia XA2 and XA2 Ultra, on a SDM630 SoC and is
working great.

- Changes in v4:
  - My e-mail address was changed in all files to reflect the new one
  - Fixed selection targets and out-of-bounds rectangles (thanks Jacopo!)
  - Fixed a warning: changed do_div to div_s64 for 64-bit division
  - Added one more register definition

- Changes in v3:
  - Removed unneeded fallthrough statements
  - Fixed double mode initialization at probe time
  - Fixed typo in the dt-binding description (8->25MPixels)
  - Fixed dt-binding data-lanes description, added to required properties

- Changes in v2:
  - Changed dt-binding name and fixed a misconception about lane
    operation (sensor supports 2/4-Lane, driver supports 4-Lane only)
  - Now using lowercase names for regulator supplies
  - Fixed redefinition of clock-noncontinuous property
  - Added informations about constraints on data bus frequencies
  - Fixed MAINTAINERS: removed git tree

AngeloGioacchino Del Regno (2):
  media: i2c: Add driver for the Sony Exmor-RS IMX300 camera sensor
  media: dt-bindings: media: i2c: Add IMX300 CMOS sensor binding

 .../bindings/media/i2c/sony,imx300.yaml       |  112 +
 MAINTAINERS                                   |    7 +
 drivers/media/i2c/Kconfig                     |   13 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/imx300.c                    | 3084 +++++++++++++++++
 5 files changed, 3217 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
 create mode 100644 drivers/media/i2c/imx300.c

-- 
2.29.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ