[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAG3jFysaGbXWtZNY=6s++NjNhimEANJZOoMXtN3udV-n3bOE=w@mail.gmail.com>
Date: Wed, 13 Jan 2021 11:03:39 +0100
From: Robert Foss <robert.foss@...aro.org>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Todor Tomov <todor.too@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>, catalin.marinas@....com,
will@...nel.org, shawnguo@...nel.org, leoyang.li@....com,
geert+renesas@...der.be, arnd@...db.de, Anson.Huang@....com,
michael@...le.cc, agx@...xcpu.org, max.oss.09@...il.com,
linux-arm-msm@...r.kernel.org,
linux-media <linux-media@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
AngeloGioacchino Del Regno <kholk11@...il.com>,
Andrey Konovalov <andrey.konovalov@...aro.org>,
Tomasz Figa <tfiga@...omium.org>,
Azam Sadiq Pasha Kapatrala Syed <akapatra@...cinc.com>,
Sarvesh Sridutt <Sarvesh.Sridutt@...rtwirelesscompute.com>
Subject: Re: [PATCH v1 16/17] arm64: dts: sdm845-db845c: Add CAMSS ISP node
Thanks Laurent!
On Sat, 9 Jan 2021 at 02:47, Laurent Pinchart
<laurent.pinchart@...asonboard.com> wrote:
>
> Hi Rob,
>
> Thank you for the patch.
>
> The subject line doesn't match the patch.
>
> On Fri, Jan 08, 2021 at 01:04:28PM +0100, Robert Foss wrote:
> > Add regulators and camss DT node.
> >
> > Signed-off-by: Robert Foss <robert.foss@...aro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > index a943b3f353ce..7bad0515345e 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 {
> > regulator-max-microvolt = <1028000>;
> > };
> >
> > + vdda_mipi_csi0_0p9:
> > + vdda_mipi_csi1_0p9:
> > + vdda_mipi_csi2_0p9:
>
> No need for new labels, you can simply use vreg_l1a_0p875 below.
Ack
>
> > vreg_l1a_0p875: ldo1 {
> > regulator-min-microvolt = <880000>;
> > regulator-max-microvolt = <880000>;
> > @@ -1106,6 +1109,15 @@ &cci {
> > status = "okay";
> > };
> >
> > +&camss {
> > + vdda-csi0-supply = <&vdda_mipi_csi0_0p9>;
> > + vdda-csi1-supply = <&vdda_mipi_csi1_0p9>;
> > + vdda-csi2-supply = <&vdda_mipi_csi2_0p9>;
> > +
> > + status = "disabled";
>
> This isn't needed.
Ack
>
> > +
>
> Extra blank line.
Ack
>
> > +};
> > +
> > &cci_i2c0 {
> > camera@10 {
> > compatible = "ovti,ov8856";
>
> --
> Regards,
>
> Laurent Pinchart
Powered by blists - more mailing lists