Date:   Thu, 14 Jan 2021 18:13:28 +0000
From:   Jonathan Cameron <Jonathan.Cameron@...wei.com>
To:     Ben Widawsky <ben.widawsky@...el.com>
CC:     <linux-cxl@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-pci@...r.kernel.org>,
        "linux-acpi@...r.kernel.org, Ira Weiny" <ira.weiny@...el.com>,
        Dan Williams <dan.j.williams@...el.com>,
        "Vishal Verma" <vishal.l.verma@...el.com>,
        "Kelley, Sean V" <sean.v.kelley@...el.com>,
        Rafael Wysocki <rafael.j.wysocki@...el.com>,
        "Bjorn Helgaas" <helgaas@...nel.org>,
        Jon Masters <jcm@...masters.org>,
        Chris Browy <cbrowy@...ry-design.com>,
        Randy Dunlap <rdunlap@...radead.org>,
        "Christoph Hellwig" <hch@...radead.org>,
        <daniel.lll@...baba-inc.com>
Subject: Re: [RFC PATCH v3 07/16] cxl/mem: Implement polled mode mailbox

On Thu, 14 Jan 2021 09:50:44 -0800
Ben Widawsky <ben.widawsky@...el.com> wrote:

> On 21-01-14 17:40:12, Jonathan Cameron wrote:
> > On Mon, 11 Jan 2021 14:51:11 -0800
> > Ben Widawsky <ben.widawsky@...el.com> wrote:
> >   
> > > Provide enough functionality to utilize the mailbox of a memory device.
> > > The mailbox is used to interact with the firmware running on the memory
> > > device.
> > > 
> > > The CXL specification defines separate capabilities for the mailbox and
> > > the memory device. While we can confirm the mailbox is ready, in order
> > > to actually interact with the memory device, you must also confirm the
> > > device's firmware is ready.
> > > 
> > > Create a function to handle sending a command, optionally with a
> > > payload, to the memory device, polling on a result, and then optionally
> > > copying out the payload. The algorithm for doing this comes straight out
> > > of the CXL 2.0 specification.
> > > 
> > > Primary mailboxes are capable of generating an interrupt when submitting
> > > a command in the background. That implementation is saved for a later
> > > time.
> > > 
> > > Secondary mailboxes aren't implemented at this time.
> > > 
> > > The flow is proven with one implemented command, "identify". Because the
> > > class code has already told the driver this is a memory device and the
> > > identify command is mandatory, it's safe to assume for sane devices that
> > > everything here will work.
> > > 
> > > Signed-off-by: Ben Widawsky <ben.widawsky@...el.com>  
> > One more thing that had me confused in a later patch (14)
> > 
> > J  
> > > ---
> > >  drivers/cxl/cxl.h |  43 +++++++
> > >  drivers/cxl/mem.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++
> > >  2 files changed, 355 insertions(+)
> > > 
> > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > > index a77286d04ce4..ca3fa496e21c 100644
> > > --- a/drivers/cxl/cxl.h
> > > +++ b/drivers/cxl/cxl.h
> > > @@ -32,9 +32,40 @@
> > >  #define   CXLDEV_MB_CAP_PAYLOAD_SIZE_MASK GENMASK(4, 0)
> > >  #define   CXLDEV_MB_CAP_PAYLOAD_SIZE_SHIFT 0
> > >  #define CXLDEV_MB_CTRL_OFFSET 0x04
> > > +#define   CXLDEV_MB_CTRL_DOORBELL BIT(0)
> > >  #define CXLDEV_MB_CMD_OFFSET 0x08
> > > +#define   CXLDEV_MB_CMD_COMMAND_OPCODE_SHIFT 0
> > > +#define   CXLDEV_MB_CMD_COMMAND_OPCODE_MASK GENMASK(15, 0)
> > > +#define   CXLDEV_MB_CMD_PAYLOAD_LENGTH_SHIFT 16
> > > +#define   CXLDEV_MB_CMD_PAYLOAD_LENGTH_MASK GENMASK(36, 16)
> > >  #define CXLDEV_MB_STATUS_OFFSET 0x10
> > > +#define   CXLDEV_MB_STATUS_RET_CODE_SHIFT 32
> > > +#define   CXLDEV_MB_STATUS_RET_CODE_MASK GENMASK(47, 32)
> > >  #define CXLDEV_MB_BG_CMD_STATUS_OFFSET 0x18
> > > +#define CXLDEV_MB_PAYLOAD_OFFSET 0x20
> > > +
> > > +/* Memory Device (CXL 2.0 - 8.2.8.5.1.1) */
> > > +#define CXLMDEV_STATUS_OFFSET 0x0
> > > +#define   CXLMDEV_DEV_FATAL BIT(0)
> > > +#define   CXLMDEV_FW_HALT BIT(1)
> > > +#define   CXLMDEV_STATUS_MEDIA_STATUS_SHIFT 2
> > > +#define   CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2)
> > > +#define     CXLMDEV_MS_NOT_READY 0
> > > +#define     CXLMDEV_MS_READY 1
> > > +#define     CXLMDEV_MS_ERROR 2
> > > +#define     CXLMDEV_MS_DISABLED 3
> > > +#define   CXLMDEV_READY(status) \
> > > +		(CXL_GET_FIELD(status, CXLMDEV_STATUS_MEDIA_STATUS) == CXLMDEV_MS_READY)
> > > +#define   CXLMDEV_MBOX_IF_READY BIT(4)
> > > +#define   CXLMDEV_RESET_NEEDED_SHIFT 5
> > > +#define   CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5)
> > > +#define     CXLMDEV_RESET_NEEDED_NOT 0
> > > +#define     CXLMDEV_RESET_NEEDED_COLD 1
> > > +#define     CXLMDEV_RESET_NEEDED_WARM 2
> > > +#define     CXLMDEV_RESET_NEEDED_HOT 3
> > > +#define     CXLMDEV_RESET_NEEDED_CXL 4
> > > +#define   CXLMDEV_RESET_NEEDED(status) \
> > > +		(CXL_GET_FIELD(status, CXLMDEV_RESET_NEEDED) != CXLMDEV_RESET_NEEDED_NOT)
> > >  
> > >  /**
> > >   * struct cxl_mem - A CXL memory device
> > > @@ -45,6 +76,16 @@ struct cxl_mem {
> > >  	struct pci_dev *pdev;
> > >  	void __iomem *regs;
> > >  
> > > +	struct {
> > > +		struct range range;
> > > +	} pmem;
> > > +
> > > +	struct {
> > > +		struct range range;
> > > +	} ram;
> > > +
> > > +	char firmware_version[0x10];
> > > +
> > >  	/* Cap 0001h - CXL_CAP_CAP_ID_DEVICE_STATUS */
> > >  	struct {
> > >  		void __iomem *regs;
> > > @@ -52,6 +93,7 @@ struct cxl_mem {
> > >  
> > >  	/* Cap 0002h - CXL_CAP_CAP_ID_PRIMARY_MAILBOX */
> > >  	struct {
> > > +		struct mutex mutex; /* Protects device mailbox and firmware */
> > >  		void __iomem *regs;
> > >  		size_t payload_size;
> > >  	} mbox;
> > > @@ -90,6 +132,7 @@ struct cxl_mem {
> > >  
> > >  cxl_reg(status);
> > >  cxl_reg(mbox);
> > > +cxl_reg(mem);
> > >  
> > >  #define cxl_payload_regs(cxlm)                                                 \
> > >  	((void __iomem *)(cxlm)->mbox.regs + CXLDEV_MB_PAYLOAD_OFFSET)
> > > diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> > > index 8da9f4a861ea..e9ba97bbd7b9 100644
> > > --- a/drivers/cxl/mem.c
> > > +++ b/drivers/cxl/mem.c
> > > @@ -1,5 +1,6 @@
> > >  // SPDX-License-Identifier: GPL-2.0-only
> > >  /* Copyright(c) 2020 Intel Corporation. All rights reserved. */
> > > +#include <linux/sched/clock.h>
> > >  #include <linux/module.h>
> > >  #include <linux/pci.h>
> > >  #include <linux/io.h>
> > > @@ -7,6 +8,248 @@
> > >  #include "pci.h"
> > >  #include "cxl.h"
> > >  
> > > +#define cxl_doorbell_busy(cxlm)                                                \
> > > +	(cxl_read_mbox_reg32(cxlm, CXLDEV_MB_CTRL_OFFSET) &                    \
> > > +	 CXLDEV_MB_CTRL_DOORBELL)
> > > +
> > > +#define CXL_MAILBOX_TIMEOUT_US 2000
> > > +
> > > +enum opcode {
> > > +	CXL_MBOX_OP_IDENTIFY    = 0x4000,
> > > +	CXL_MBOX_OP_MAX         = 0x10000
> > > +};
> > > +
> > > +/**
> > > + * struct mbox_cmd - A command to be submitted to hardware.
> > > + * @opcode: (input) The command set and command submitted to hardware.
> > > + * @payload: (input/output) Pointer to the input and output payload.
> > > + *           Payload can be NULL if the caller wants to populate the payload
> > > + *           registers themselves (potentially avoiding a copy).
> > > + * @size_in: (input) Number of bytes to load from @payload.
> > > + * @size_out:
> > > + *  - (input) Number of bytes allocated to load into @payload.  
> > 
> > I'm not actually seeing where this is used as an input. I'd expect a min(input,  output)
> > at the memcpy but there isn't one there.
> >   
> 
> The functionality changed since v2 and this interface no longer deals with
> restricting output length. This was because at some intermediate point I had
> entirely removed the copying in/out of the payload registers from this command.
> As you see, it came back.
> 
> For userspace submitted commands the lengths are all validated up front before
> we get here.
> 
> For commands submitted directly from the kernel, I've gone back and forth about
> how useful it is. If you feel strongly that it is useful, I can add it back. It
> sounds like you want me to convert everything back to an intermediate buffer,
> which I will respond in that patch, so I'd need to rework it anyway if that's
> the path we end up taking.

Fix the docs to make that (output) only works for me.  Perhaps also add a line saying that
output payload length must be large enough.

> 
> > > + *  - (output) Number of bytes loaded into @payload.
> > > + * @return_code: (output) Error code returned from hardware.
> > > + *
> > > + * This is the primary mechanism used to send commands to the hardware.
> > > + * All the fields except @payload correspond exactly to the fields described in
> > > + * Command Register section of the CXL 2.0 spec (8.2.8.4.5). @payload
> > > + * corresponds to the Command Payload Registers (8.2.8.4.8).
> > > + */
> > > +struct mbox_cmd {
> > > +	u16 opcode;
> > > +	void *payload;
> > > +	size_t size_in;
> > > +	size_t size_out;
> > > +	u16 return_code;
> > > +};
> > > +
> > > +static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
> > > +{
> > > +	const int timeout = msecs_to_jiffies(CXL_MAILBOX_TIMEOUT_US);
> > > +	const unsigned long start = jiffies;
> > > +	unsigned long end = start;
> > > +
> > > +	while (cxl_doorbell_busy(cxlm)) {
> > > +		end = jiffies;
> > > +
> > > +		if (time_after(end, start + timeout)) {
> > > +			/* Check again in case preempted before timeout test */
> > > +			if (!cxl_doorbell_busy(cxlm))
> > > +				break;
> > > +			return -ETIMEDOUT;
> > > +		}
> > > +		cpu_relax();
> > > +	}
> > > +
> > > +	dev_dbg(&cxlm->pdev->dev, "Doorbell wait took %dms",
> > > +		jiffies_to_msecs(end) - jiffies_to_msecs(start));
> > > +	return 0;
> > > +}
> > > +
> > > +static void cxl_mem_mbox_timeout(struct cxl_mem *cxlm,
> > > +				 struct mbox_cmd *mbox_cmd)
> > > +{
> > > +	dev_warn(&cxlm->pdev->dev, "Mailbox command timed out\n");
> > > +	dev_info(&cxlm->pdev->dev,
> > > +		 "\topcode: 0x%04x\n"
> > > +		 "\tpayload size: %zub\n",
> > > +		 mbox_cmd->opcode, mbox_cmd->size_in);
> > > +	print_hex_dump_debug("Payload ", DUMP_PREFIX_OFFSET, 16, 1,
> > > +			     mbox_cmd->payload, mbox_cmd->size_in, true);
> > > +
> > > +	/* Here's a good place to figure out if a device reset is needed */
> > > +}
> > > +
> > > +/**
> > > + * cxl_mem_mbox_send_cmd() - Send a mailbox command to a memory device.
> > > + * @cxlm: The CXL memory device to communicate with.
> > > + * @mbox_cmd: Command to send to the memory device.
> > > + *
> > > + * Context: Any context. Expects mbox_lock to be held.
> > > + * Return: -ETIMEDOUT if timeout occurred waiting for completion. 0 on success.
> > > + *         Caller should check the return code in @mbox_cmd to make sure it
> > > + *         succeeded.
> > > + *
> > > + * This is a generic form of the CXL mailbox send command, thus the only I/O
> > > + * operations used are cxl_read_mbox_reg(). Memory devices, and perhaps other
> > > + * types of CXL devices may have further information available upon error
> > > + * conditions.
> > > + *
> > > + * FIXME: As stated above, references to &struct cxl_mem should be changed to a
> > > + * more generic cxl structure when needed.
> > > + */
> > > +static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm,
> > > +				 struct mbox_cmd *mbox_cmd)
> > > +{
> > > +	u64 cmd_reg, status_reg;
> > > +	size_t out_len;
> > > +	int rc;
> > > +
> > > +	lockdep_assert_held(&cxlm->mbox.mutex);
> > > +
> > > +	/*
> > > +	 * Here are the steps from 8.2.8.4 of the CXL 2.0 spec.
> > > +	 *   1. Caller reads MB Control Register to verify doorbell is clear
> > > +	 *   2. Caller writes Command Register
> > > +	 *   3. Caller writes Command Payload Registers if input payload is non-empty
> > > +	 *   4. Caller writes MB Control Register to set doorbell
> > > +	 *   5. Caller either polls for doorbell to be clear or waits for interrupt if configured
> > > +	 *   6. Caller reads MB Status Register to fetch Return code
> > > +	 *   7. If command successful, Caller reads Command Register to get Payload Length
> > > +	 *   8. If output payload is non-empty, host reads Command Payload Registers
> > > +	 */
> > > +
> > > +	/* #1 */
> > > +	WARN_ON(cxl_doorbell_busy(cxlm));
> > > +
> > > +	cmd_reg = CXL_SET_FIELD(mbox_cmd->opcode, CXLDEV_MB_CMD_COMMAND_OPCODE);
> > > +	if (mbox_cmd->size_in) {
> > > +		cmd_reg |= CXL_SET_FIELD(mbox_cmd->size_in,
> > > +					 CXLDEV_MB_CMD_PAYLOAD_LENGTH);
> > > +		if (mbox_cmd->payload)
> > > +			memcpy_toio(cxl_payload_regs(cxlm), mbox_cmd->payload,
> > > +				    mbox_cmd->size_in);
> > > +	}
> > > +
> > > +	/* #2, #3 */
> > > +	cxl_write_mbox_reg64(cxlm, CXLDEV_MB_CMD_OFFSET, cmd_reg);
> > > +
> > > +	/* #4 */
> > > +	dev_dbg(&cxlm->pdev->dev, "Sending command\n");
> > > +	cxl_write_mbox_reg32(cxlm, CXLDEV_MB_CTRL_OFFSET,
> > > +			     CXLDEV_MB_CTRL_DOORBELL);
> > > +
> > > +	/* #5 */
> > > +	rc = cxl_mem_wait_for_doorbell(cxlm);
> > > +	if (rc == -ETIMEDOUT) {
> > > +		cxl_mem_mbox_timeout(cxlm, mbox_cmd);
> > > +		return rc;
> > > +	}
> > > +
> > > +	/* #6 */
> > > +	status_reg = cxl_read_mbox_reg64(cxlm, CXLDEV_MB_STATUS_OFFSET);
> > > +	mbox_cmd->return_code =
> > > +		CXL_GET_FIELD(status_reg, CXLDEV_MB_STATUS_RET_CODE);
> > > +
> > > +	if (mbox_cmd->return_code != 0) {
> > > +		dev_dbg(&cxlm->pdev->dev, "Mailbox operation had an error\n");
> > > +		return 0;
> > > +	}
> > > +
> > > +	/* #7 */
> > > +	cmd_reg = cxl_read_mbox_reg64(cxlm, CXLDEV_MB_CMD_OFFSET);
> > > +	out_len = CXL_GET_FIELD(cmd_reg, CXLDEV_MB_CMD_PAYLOAD_LENGTH);
> > > +	mbox_cmd->size_out = out_len;
> > > +
> > > +	/* #8 */
> > > +	if (out_len && mbox_cmd->payload)
> > > +		memcpy_fromio(mbox_cmd->payload, cxl_payload_regs(cxlm),
> > > +			      mbox_cmd->size_out);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +/**
> > > + * cxl_mem_mbox_get() - Acquire exclusive access to the mailbox.
> > > + * @cxlm: The memory device to gain access to.
> > > + *
> > > + * Context: Any context. Takes the mbox_lock.
> > > + * Return: 0 if exclusive access was acquired.
> > > + */
> > > +static int cxl_mem_mbox_get(struct cxl_mem *cxlm)
> > > +{
> > > +	u64 md_status;
> > > +	int rc = -EBUSY;
> > > +
> > > +	mutex_lock_io(&cxlm->mbox.mutex);
> > > +
> > > +	/*
> > > +	 * XXX: There is some amount of ambiguity in the 2.0 version of the spec
> > > +	 * around the mailbox interface ready (8.2.8.5.1.1). The purpose of the
> > > +	 * bit is to allow firmware running on the device to notify us that it's
> > > +	 * ready to receive commands. It is unclear if the bit needs to be read
> > > +	 * every time one tries to use the mailbox, ie. the firmware can switch
> > > +	 * it on and off as needed. Second, there is no defined timeout for
> > > +	 * mailbox ready, like there is for the doorbell interface.
> > > +	 *
> > > +	 * As such, we make the following assumptions:
> > > +	 * 1. The firmware might toggle the Mailbox Interface Ready bit, and so
> > > +	 *    we check it for every command.
> > > +	 * 2. If the doorbell is clear, the firmware should have first set the
> > > +	 *    Mailbox Interface Ready bit. Therefore, waiting for the doorbell
> > > +	 *    to be ready is a sufficient amount of time.
> > > +	 */
> > > +	rc = cxl_mem_wait_for_doorbell(cxlm);
> > > +	if (rc) {
> > > +		dev_warn(&cxlm->pdev->dev, "Mailbox interface not ready\n");
> > > +		goto out;
> > > +	}
> > > +
> > > +	md_status = cxl_read_mem_reg64(cxlm, CXLMDEV_STATUS_OFFSET);
> > > +	if (md_status & CXLMDEV_MBOX_IF_READY && CXLMDEV_READY(md_status)) {
> > > +		/*
> > > +		 * Hardware shouldn't allow a ready status but also have failure
> > > +		 * bits set. Spit out an error, this should be a bug report
> > > +		 */
> > > +		if (md_status & CXLMDEV_DEV_FATAL) {
> > > +			dev_err(&cxlm->pdev->dev,
> > > +				"CXL device reporting ready and fatal\n");
> > > +			rc = -EFAULT;
> > > +			goto out;
> > > +		}
> > > +		if (md_status & CXLMDEV_FW_HALT) {
> > > +			dev_err(&cxlm->pdev->dev,
> > > +				"CXL device reporting ready and halted\n");
> > > +			rc = -EFAULT;
> > > +			goto out;
> > > +		}
> > > +		if (CXLMDEV_RESET_NEEDED(md_status)) {
> > > +			dev_err(&cxlm->pdev->dev,
> > > +				"CXL device reporting ready and reset needed\n");
> > > +			rc = -EFAULT;
> > > +			goto out;
> > > +		}
> > > +
> > > +		return 0;
> > > +	}
> > > +
> > > +out:
> > > +	mutex_unlock(&cxlm->mbox.mutex);
> > > +	return rc;
> > > +}
> > > +
> > > +/**
> > > + * cxl_mem_mbox_put() - Release exclusive access to the mailbox.
> > > + * @cxlm: The CXL memory device to communicate with.
> > > + *
> > > + * Context: Any context. Expects mbox_lock to be held.
> > > + */
> > > +static void cxl_mem_mbox_put(struct cxl_mem *cxlm)
> > > +{
> > > +	mutex_unlock(&cxlm->mbox.mutex);
> > > +}
> > > +
> > >  /**
> > >   * cxl_mem_setup_regs() - Setup necessary MMIO.
> > >   * @cxlm: The CXL memory device to communicate with.
> > > @@ -135,6 +378,8 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo,
> > >  		return NULL;
> > >  	}
> > >  
> > > +	mutex_init(&cxlm->mbox.mutex);
> > > +
> > >  	regs = pcim_iomap_table(pdev)[bar];
> > >  	cxlm->pdev = pdev;
> > >  	cxlm->regs = regs + offset;
> > > @@ -167,6 +412,69 @@ static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
> > >  	return 0;
> > >  }
> > >  
> > > +/**
> > > + * cxl_mem_identify() - Send the IDENTIFY command to the device.
> > > + * @cxlm: The device to identify.
> > > + *
> > > + * Return: 0 if identify was executed successfully.
> > > + *
> > > + * This will dispatch the identify command to the device and on success populate
> > > + * structures to be exported to sysfs.
> > > + */
> > > +static int cxl_mem_identify(struct cxl_mem *cxlm)
> > > +{
> > > +	struct cxl_mbox_identify {
> > > +		char fw_revision[0x10];
> > > +		__le64 total_capacity;
> > > +		__le64 volatile_capacity;
> > > +		__le64 persistent_capacity;
> > > +		__le64 partition_align;
> > > +		__le16 info_event_log_size;
> > > +		__le16 warning_event_log_size;
> > > +		__le16 failure_event_log_size;
> > > +		__le16 fatal_event_log_size;
> > > +		__le32 lsa_size;
> > > +		u8 poison_list_max_mer[3];
> > > +		__le16 inject_poison_limit;
> > > +		u8 poison_caps;
> > > +		u8 qos_telemetry_caps;
> > > +	} __packed id;
> > > +	struct mbox_cmd mbox_cmd;
> > > +	int rc;
> > > +
> > > +	/* Retrieve initial device memory map */
> > > +	rc = cxl_mem_mbox_get(cxlm);
> > > +	if (rc)
> > > +		return rc;
> > > +
> > > +	mbox_cmd = (struct mbox_cmd){
> > > +		.opcode = CXL_MBOX_OP_IDENTIFY,
> > > +		.payload = &id,
> > > +		.size_in = 0,
> > > +	};
> > > +	rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
> > > +	cxl_mem_mbox_put(cxlm);
> > > +	if (rc)
> > > +		return rc;
> > > +
> > > +	if (mbox_cmd.size_out != sizeof(id))
> > > +		return -ENXIO;
> > > +
> > > +	/*
> > > +	 * TODO: enumerate DPA map, as 'ram' and 'pmem' do not alias.
> > > +	 * For now, only the capacity is exported in sysfs
> > > +	 */
> > > +	cxlm->ram.range.start = 0;
> > > +	cxlm->ram.range.end = le64_to_cpu(id.volatile_capacity) - 1;
> > > +
> > > +	cxlm->pmem.range.start = 0;
> > > +	cxlm->pmem.range.end = le64_to_cpu(id.persistent_capacity) - 1;
> > > +
> > > +	memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision));
> > > +
> > > +	return rc;
> > > +}
> > > +
> > >  static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > >  {
> > >  	struct device *dev = &pdev->dev;
> > > @@ -222,6 +530,10 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > >  	if (rc)
> > >  		goto err;
> > >  
> > > +	rc = cxl_mem_identify(cxlm);
> > > +	if (rc)
> > > +		goto err;
> > > +
> > >  	pci_set_drvdata(pdev, cxlm);
> > >  	return 0;
> > >    
> >   

Powered by blists - more mailing lists