linux-kernel - Re: [PATCH 2/3] dt-bindings: arm: rockchip: Add Radxa ROCK Pi E

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Thu, 14 Jan 2021 13:09:38 -0600
From:   Rob Herring <robh@...nel.org>
To:     Chen-Yu Tsai <wens@...nel.org>
Cc:     Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
        Heiko Stuebner <heiko@...ech.de>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/3] dt-bindings: arm: rockchip: Add Radxa ROCK Pi E

On Sun, 10 Jan 2021 11:58:45 +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@...e.org>
> 
> Radxa ROCK Pi E is a router oriented SBC based on Rockchip's RK3328 SoC.
> As the official wiki page puts it, "E for Ethernets".
> 
> It features the RK3328 SoC, gigabit and fast Ethernet RJ45 ports, both
> directly served by Ethernet controllers in the SoC, a USB 3.0 host port,
> a power-only USB type-C port, a 3.5mm headphone jack for audio output,
> two LEDs, a 40-pin Raspberry Pi style GPIO header, and optional WiFi+BT
> and PoE header.
> 
> The board comes in multiple configurations, differing in the amount of
> onboard RAM, the level of WiFi+BT (none, 802.11n 2.4GHz, or 802.11ac
> 2.4 GHz & 5 GHz), and whether PoE is supported or not. These variants
> can all share the same device tree.
> 
> The USB 2.0 OTG controller is available on the 40-pin header. This is
> not enabled in the device tree, since it is possible to use it in a
> host-only configuration, or in OTG mode with an extra pin from the
> header as the ID pin.
> 
> The device tree is based on the one of the Rock64, with various parts
> modified to match the ROCK Pi E, and some parts updated to newer styles,
> such as the gmac2io node's mdio sub-node.
> 
> Add a compatible string for the new board.
> 
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
> ---
>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 

Acked-by: Rob Herring <robh@...nel.org>