| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210113212023.5pqk5dlzs4qd6xat@earth.universe>
Date: Wed, 13 Jan 2021 22:20:23 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Cristian Ciocaltea <cristian.ciocaltea@...il.com>
Cc: Lee Jones <lee.jones@...aro.org>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Andreas Färber <afaerber@...e.de>,
Linus Walleij <linus.walleij@...aro.org>,
linux-actions@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
linux-pm@...r.kernel.org
Subject: Re: [PATCH v5 5/7] power: reset: Add poweroff driver for ATC260x
PMICs
Hi,
On Wed, Jan 13, 2021 at 01:05:55PM +0200, Cristian Ciocaltea wrote:
> This driver provides poweroff and reboot support for a system through
> the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x
> family of PMICs.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...il.com>
> ---
Thanks, queued to power-supply's for-next branch.
-- Sebastian
> Changes in v5:
> - Drop unneeded '#include <linux/of.h>'
>
> Changes in v4:
> - None
>
> Changes in v3:
> - Removed the unnecessary driver compatibles
>
> drivers/power/reset/Kconfig | 8 +-
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/atc260x-poweroff.c | 262 +++++++++++++++++++++++++
> 3 files changed, 270 insertions(+), 1 deletion(-)
> create mode 100644 drivers/power/reset/atc260x-poweroff.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index b22c4fdb2561..1737e227b16e 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -39,6 +39,13 @@ config POWER_RESET_AT91_SAMA5D2_SHDWC
> This driver supports the alternate shutdown controller for some Atmel
> SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
>
> +config POWER_RESET_ATC260X
> + tristate "Actions Semi ATC260x PMIC power-off driver"
> + depends on MFD_ATC260X
> + help
> + This driver provides power-off and restart support for a system
> + through Actions Semi ATC260x series PMICs.
> +
> config POWER_RESET_AXXIA
> bool "LSI Axxia reset driver"
> depends on ARCH_AXXIA
> @@ -292,4 +299,3 @@ config NVMEM_REBOOT_MODE
> action according to the mode.
>
> endif
> -
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 9dc49d3a57ff..b4601c0a96ed 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
> obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
> obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
> obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
> +obj-$(CONFIG_POWER_RESET_ATC260X) += atc260x-poweroff.o
> obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
> obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> diff --git a/drivers/power/reset/atc260x-poweroff.c b/drivers/power/reset/atc260x-poweroff.c
> new file mode 100644
> index 000000000000..98f20251a6d1
> --- /dev/null
> +++ b/drivers/power/reset/atc260x-poweroff.c
> @@ -0,0 +1,262 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Poweroff & reset driver for Actions Semi ATC260x PMICs
> + *
> + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@...il.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/mfd/atc260x/core.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/reboot.h>
> +#include <linux/regmap.h>
> +
> +struct atc260x_pwrc {
> + struct device *dev;
> + struct regmap *regmap;
> + struct notifier_block restart_nb;
> + int (*do_poweroff)(const struct atc260x_pwrc *pwrc, bool restart);
> +};
> +
> +/* Global variable needed only for pm_power_off */
> +static struct atc260x_pwrc *atc260x_pwrc_data;
> +
> +static int atc2603c_do_poweroff(const struct atc260x_pwrc *pwrc, bool restart)
> +{
> + int ret, deep_sleep = 0;
> + uint reg_mask, reg_val;
> +
> + /* S4-Deep Sleep Mode is NOT available for WALL/USB power */
> + if (!restart && !power_supply_is_system_supplied()) {
> + deep_sleep = 1;
> + dev_info(pwrc->dev, "Enabling S4-Deep Sleep Mode");
> + }
> +
> + /* Update wakeup sources */
> + reg_val = ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN |
> + (restart ? ATC2603C_PMU_SYS_CTL0_RESET_WK_EN
> + : ATC2603C_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN);
> +
> + ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL0,
> + ATC2603C_PMU_SYS_CTL0_WK_ALL, reg_val);
> + if (ret)
> + dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret);
> +
> + /* Update power mode */
> + reg_mask = ATC2603C_PMU_SYS_CTL3_EN_S2 | ATC2603C_PMU_SYS_CTL3_EN_S3;
> +
> + ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL3, reg_mask,
> + deep_sleep ? 0 : ATC2603C_PMU_SYS_CTL3_EN_S3);
> + if (ret) {
> + dev_err(pwrc->dev, "failed to write SYS_CTL3: %d\n", ret);
> + return ret;
> + }
> +
> + /* Trigger poweroff / restart sequence */
> + reg_mask = restart ? ATC2603C_PMU_SYS_CTL0_RESTART_EN
> + : ATC2603C_PMU_SYS_CTL1_EN_S1;
> + reg_val = restart ? ATC2603C_PMU_SYS_CTL0_RESTART_EN : 0;
> +
> + ret = regmap_update_bits(pwrc->regmap,
> + restart ? ATC2603C_PMU_SYS_CTL0 : ATC2603C_PMU_SYS_CTL1,
> + reg_mask, reg_val);
> + if (ret) {
> + dev_err(pwrc->dev, "failed to write SYS_CTL%d: %d\n",
> + restart ? 0 : 1, ret);
> + return ret;
> + }
> +
> + /* Wait for trigger completion */
> + mdelay(200);
> +
> + return 0;
> +}
> +
> +static int atc2609a_do_poweroff(const struct atc260x_pwrc *pwrc, bool restart)
> +{
> + int ret, deep_sleep = 0;
> + uint reg_mask, reg_val;
> +
> + /* S4-Deep Sleep Mode is NOT available for WALL/USB power */
> + if (!restart && !power_supply_is_system_supplied()) {
> + deep_sleep = 1;
> + dev_info(pwrc->dev, "Enabling S4-Deep Sleep Mode");
> + }
> +
> + /* Update wakeup sources */
> + reg_val = ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN |
> + (restart ? ATC2609A_PMU_SYS_CTL0_RESET_WK_EN
> + : ATC2609A_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN);
> +
> + ret = regmap_update_bits(pwrc->regmap, ATC2609A_PMU_SYS_CTL0,
> + ATC2609A_PMU_SYS_CTL0_WK_ALL, reg_val);
> + if (ret)
> + dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret);
> +
> + /* Update power mode */
> + reg_mask = ATC2609A_PMU_SYS_CTL3_EN_S2 | ATC2609A_PMU_SYS_CTL3_EN_S3;
> +
> + ret = regmap_update_bits(pwrc->regmap, ATC2609A_PMU_SYS_CTL3, reg_mask,
> + deep_sleep ? 0 : ATC2609A_PMU_SYS_CTL3_EN_S3);
> + if (ret) {
> + dev_err(pwrc->dev, "failed to write SYS_CTL3: %d\n", ret);
> + return ret;
> + }
> +
> + /* Trigger poweroff / restart sequence */
> + reg_mask = restart ? ATC2609A_PMU_SYS_CTL0_RESTART_EN
> + : ATC2609A_PMU_SYS_CTL1_EN_S1;
> + reg_val = restart ? ATC2609A_PMU_SYS_CTL0_RESTART_EN : 0;
> +
> + ret = regmap_update_bits(pwrc->regmap,
> + restart ? ATC2609A_PMU_SYS_CTL0 : ATC2609A_PMU_SYS_CTL1,
> + reg_mask, reg_val);
> + if (ret) {
> + dev_err(pwrc->dev, "failed to write SYS_CTL%d: %d\n",
> + restart ? 0 : 1, ret);
> + return ret;
> + }
> +
> + /* Wait for trigger completion */
> + mdelay(200);
> +
> + return 0;
> +}
> +
> +static int atc2603c_init(const struct atc260x_pwrc *pwrc)
> +{
> + int ret;
> +
> + /*
> + * Delay transition from S2/S3 to S1 in order to avoid
> + * DDR init failure in Bootloader.
> + */
> + ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL3,
> + ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN,
> + ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN);
> + if (ret)
> + dev_warn(pwrc->dev, "failed to write SYS_CTL3: %d\n", ret);
> +
> + /* Set wakeup sources */
> + ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL0,
> + ATC2603C_PMU_SYS_CTL0_WK_ALL,
> + ATC2603C_PMU_SYS_CTL0_HDSW_WK_EN |
> + ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN);
> + if (ret)
> + dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int atc2609a_init(const struct atc260x_pwrc *pwrc)
> +{
> + int ret;
> +
> + /* Set wakeup sources */
> + ret = regmap_update_bits(pwrc->regmap, ATC2609A_PMU_SYS_CTL0,
> + ATC2609A_PMU_SYS_CTL0_WK_ALL,
> + ATC2609A_PMU_SYS_CTL0_HDSW_WK_EN |
> + ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN);
> + if (ret)
> + dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static void atc260x_pwrc_pm_handler(void)
> +{
> + atc260x_pwrc_data->do_poweroff(atc260x_pwrc_data, false);
> +
> + WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int atc260x_pwrc_restart_handler(struct notifier_block *nb,
> + unsigned long mode, void *cmd)
> +{
> + struct atc260x_pwrc *pwrc = container_of(nb, struct atc260x_pwrc,
> + restart_nb);
> + pwrc->do_poweroff(pwrc, true);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int atc260x_pwrc_probe(struct platform_device *pdev)
> +{
> + struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
> + struct atc260x_pwrc *priv;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = &pdev->dev;
> + priv->regmap = atc260x->regmap;
> + priv->restart_nb.notifier_call = atc260x_pwrc_restart_handler;
> + priv->restart_nb.priority = 192;
> +
> + switch (atc260x->ic_type) {
> + case ATC2603C:
> + priv->do_poweroff = atc2603c_do_poweroff;
> + ret = atc2603c_init(priv);
> + break;
> + case ATC2609A:
> + priv->do_poweroff = atc2609a_do_poweroff;
> + ret = atc2609a_init(priv);
> + break;
> + default:
> + dev_err(priv->dev,
> + "Poweroff not supported for ATC260x PMIC type: %u\n",
> + atc260x->ic_type);
> + return -EINVAL;
> + }
> +
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, priv);
> +
> + if (!pm_power_off) {
> + atc260x_pwrc_data = priv;
> + pm_power_off = atc260x_pwrc_pm_handler;
> + } else {
> + dev_warn(priv->dev, "Poweroff callback already assigned\n");
> + }
> +
> + ret = register_restart_handler(&priv->restart_nb);
> + if (ret)
> + dev_err(priv->dev, "failed to register restart handler: %d\n",
> + ret);
> +
> + return ret;
> +}
> +
> +static int atc260x_pwrc_remove(struct platform_device *pdev)
> +{
> + struct atc260x_pwrc *priv = platform_get_drvdata(pdev);
> +
> + if (atc260x_pwrc_data == priv) {
> + pm_power_off = NULL;
> + atc260x_pwrc_data = NULL;
> + }
> +
> + unregister_restart_handler(&priv->restart_nb);
> +
> + return 0;
> +}
> +
> +static struct platform_driver atc260x_pwrc_driver = {
> + .probe = atc260x_pwrc_probe,
> + .remove = atc260x_pwrc_remove,
> + .driver = {
> + .name = "atc260x-pwrc",
> + },
> +};
> +
> +module_platform_driver(atc260x_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff & reset driver for ATC260x PMICs");
> +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@...il.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.30.0
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists