| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Jan 2021 10:39:18 +0100
From: Philipp Zabel <p.zabel@...gutronix.de>
To: Steen Hegelund <steen.hegelund@...rochip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Gregory Clement <gregory.clement@...tlin.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/3] reset: mchp: sparx5: add switch reset driver
Hi Steen,
thank you for the patch. In addition to Andrew's comments, I have a few
more below:
On Wed, 2021-01-13 at 21:19 +0100, Steen Hegelund wrote:
> Signed-off-by: Steen Hegelund <steen.hegelund@...rochip.com>
> ---
> drivers/reset/Kconfig | 8 ++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-microchip-sparx5.c | 145 +++++++++++++++++++++++++
> 3 files changed, 154 insertions(+)
> create mode 100644 drivers/reset/reset-microchip-sparx5.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 71ab75a46491..05c240c47a8a 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -101,6 +101,14 @@ config RESET_LPC18XX
> help
> This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
>
> +config RESET_MCHP_SPARX5
> + bool "Microchip Sparx5 reset driver"
> + depends on HAS_IOMEM || COMPILE_TEST
> + default y if SPARX5_SWITCH
> + select MFD_SYSCON
> + help
> + This driver supports switch core reset for the Microchip Sparx5 SoC.
> +
> config RESET_MESON
> tristate "Meson Reset Driver"
> depends on ARCH_MESON || COMPILE_TEST
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 1054123fd187..341fd9ab4bf6 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
> obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
> obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
> obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> +obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
> obj-$(CONFIG_RESET_MESON) += reset-meson.o
> obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
> obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
> diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c
> new file mode 100644
> index 000000000000..bb636ebd22d2
> --- /dev/null
> +++ b/drivers/reset/reset-microchip-sparx5.c
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/* Microchip Sparx5 Switch Reset driver
> + *
> + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
> + *
> + * The Sparx5 Chip Register Model can be browsed at this location:
> + * https://github.com/microchip-ung/sparx-5_reginfo
> + */
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/notifier.h>
Please drop all unused headers.
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +
> +#define PROTECT_REG 0x84
> +#define PROTECT_BIT BIT(10)
> +#define SOFT_RESET_REG 0x08
> +#define SOFT_RESET_BIT BIT(1)
> +
> +struct mchp_reset_context {
> + struct device *dev;
> + struct regmap *cpu_ctrl;
> + struct regmap *gcb_ctrl;
> + struct reset_controller_dev reset_ctrl;
For consistency, I'd like this to be called rcdev, or something else
that doesn't sound like this should be a struct reset_control.
> +};
> +
> +static u32 sparx5_read_soft_rst(struct mchp_reset_context *ctx)
> +{
> + u32 val;
> +
> + regmap_read(ctx->gcb_ctrl, SOFT_RESET_REG, &val);
> + return val;
> +}
This can be dropped if you use regmap_read_poll_timeout() below.
> +static int sparx5_switch_reset(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct mchp_reset_context *ctx =
> + container_of(rcdev, struct mchp_reset_context, reset_ctrl);
> + u32 val;
> +
> + /* Make sure the core is PROTECTED from reset */
> + regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, PROTECT_BIT);
> +
> + dev_info(ctx->dev, "soft reset of switchcore\n");
> +
> + /* Start soft reset */
> + regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
> +
> + /* Wait for soft reset done */
> + return read_poll_timeout(sparx5_read_soft_rst, val,
> + (val & SOFT_RESET_BIT) == 0,
> + 1, 100, false,
> + ctx);
This looks like you could use regmap_read_poll_timeout() here.
> +}
> +
> +static const struct reset_control_ops sparx5_reset_ops = {
> + .reset = sparx5_switch_reset,
> +};
> +
> +static int mchp_sparx5_reset_config(struct platform_device *pdev,
> + struct mchp_reset_context *ctx)
> +{
> + struct device_node *dn = pdev->dev.of_node;
> + struct regmap *cpu_ctrl, *gcb_ctrl;
> + struct device_node *syscon_np;
> + int err;
> +
> + syscon_np = of_parse_phandle(dn, "syscons", 0);
> + if (!syscon_np)
> + return -ENODEV;
> + cpu_ctrl = syscon_node_to_regmap(syscon_np);
> + if (IS_ERR(cpu_ctrl))
> + goto err_cpu;
> + of_node_put(syscon_np);
If you move the of_node_put() up before the IS_ERR() check, you don't
have to repeat it at the err_cpu: label. In fact, if you also move the
error message up here, you can return here and drop the label.
> +
> + syscon_np = of_parse_phandle(dn, "syscons", 1);
> + if (!syscon_np)
> + return -ENODEV;
> + gcb_ctrl = syscon_node_to_regmap(syscon_np);
> + if (IS_ERR(gcb_ctrl))
> + goto err_gcb;
> + of_node_put(syscon_np);
Same as above.
> +
> + ctx->cpu_ctrl = cpu_ctrl;
> + ctx->gcb_ctrl = gcb_ctrl;
> +
> + ctx->reset_ctrl.owner = THIS_MODULE;
> + ctx->reset_ctrl.nr_resets = 1;
> + ctx->reset_ctrl.ops = &sparx5_reset_ops;
> + ctx->reset_ctrl.of_node = dn;
> +
> + err = devm_reset_controller_register(&pdev->dev, &ctx->reset_ctrl);
> + if (err)
> + dev_err(&pdev->dev, "could not register reset controller\n");
> + pr_info("%s:%d\n", __func__, __LINE__);
> + return err;
The only reason devm_reset_controller_register() can fail
unexpectedly is -ENOMEM. I think it would be fine to just
return devm_reset_controller_regster() here.
> +err_cpu:
> + of_node_put(syscon_np);
> + dev_err(&pdev->dev, "No cpu syscon map\n");
> + return PTR_ERR(cpu_ctrl);
> +err_gcb:
> + of_node_put(syscon_np);
> + dev_err(&pdev->dev, "No gcb syscon map\n");
> + return PTR_ERR(gcb_ctrl);
> +}
> +
> +static int mchp_sparx5_reset_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mchp_reset_context *ctx;
> +
> + pr_info("%s:%d\n", __func__, __LINE__);
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> + ctx->dev = dev;
> + return mchp_sparx5_reset_config(pdev, ctx);
> +}
You could fold the contents of mchp_sparx5_reset_config() into
mchp_sparx5_reset_probe() and replace all &pdev->dev with dev.
regards
Philipp
Powered by blists - more mailing lists