| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Jan 2021 17:05:28 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>,
Robert Richter <rric@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
x86@...nel.org, "H. Peter Anvin" <hpa@...or.com>
Cc: Viresh Kumar <viresh.kumar@...aro.org>,
Vincent Guittot <vincent.guittot@...aro.org>,
Arnd Bergmann <arnd@...nel.org>, oprofile-list@...ts.sf.net,
William Cohen <wcohen@...hat.com>,
Alexander Viro <viro@...iv.linux.org.uk>,
anmar.oueja@...aro.org, Christoph Hellwig <hch@...radead.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH 15/18] arch: x86: Remove CONFIG_OPROFILE support
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove the old oprofile's architecture specific support.
Suggested-by: Christoph Hellwig <hch@...radead.org>
Suggested-by: Linus Torvalds <torvalds@...ux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
arch/x86/Kconfig | 1 -
arch/x86/Makefile | 3 -
arch/x86/include/asm/nmi.h | 1 -
arch/x86/kernel/cpu/perfctr-watchdog.c | 11 +-
arch/x86/oprofile/Makefile | 12 -
arch/x86/oprofile/backtrace.c | 127 ----
arch/x86/oprofile/init.c | 38 --
arch/x86/oprofile/nmi_int.c | 780 -------------------------
arch/x86/oprofile/op_counter.h | 30 -
arch/x86/oprofile/op_model_amd.c | 542 -----------------
arch/x86/oprofile/op_model_p4.c | 723 -----------------------
arch/x86/oprofile/op_model_ppro.c | 245 --------
arch/x86/oprofile/op_x86_model.h | 90 ---
13 files changed, 1 insertion(+), 2602 deletions(-)
delete mode 100644 arch/x86/oprofile/Makefile
delete mode 100644 arch/x86/oprofile/backtrace.c
delete mode 100644 arch/x86/oprofile/init.c
delete mode 100644 arch/x86/oprofile/nmi_int.c
delete mode 100644 arch/x86/oprofile/op_counter.h
delete mode 100644 arch/x86/oprofile/op_model_amd.c
delete mode 100644 arch/x86/oprofile/op_model_p4.c
delete mode 100644 arch/x86/oprofile/op_model_ppro.c
delete mode 100644 arch/x86/oprofile/op_x86_model.h
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 21f851179ff0..67ba48082932 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -206,7 +206,6 @@ config X86
select HAVE_MOVE_PMD
select HAVE_MOVE_PUD
select HAVE_NMI
- select HAVE_OPROFILE
select HAVE_OPTPROBES
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 7116da3980be..47e61e623e60 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -229,9 +229,6 @@ core-y += arch/x86/
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
-# must be linked after kernel/
-drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
-
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index 9d5d949e662e..1cb9c17a4cb4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -9,7 +9,6 @@
#ifdef CONFIG_X86_LOCAL_APIC
-extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
extern int reserve_perfctr_nmi(unsigned int);
extern void release_perfctr_nmi(unsigned int);
extern int reserve_evntsel_nmi(unsigned int);
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index a5ee607a3b89..3ef5868ac588 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -3,7 +3,7 @@
* local apic based NMI watchdog for various CPUs.
*
* This file also handles reservation of performance counters for coordination
- * with other users (like oprofile).
+ * with other users.
*
* Note that these events normally don't tick when the CPU idles. This means
* the frequency varies with CPU load.
@@ -105,15 +105,6 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
}
-/* checks for a bit availability (hack for oprofile) */
-int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
-{
- BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
- return !test_bit(counter, perfctr_nmi_owner);
-}
-EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
-
int reserve_perfctr_nmi(unsigned int msr)
{
unsigned int counter;
diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile
deleted file mode 100644
index 4d49b5a27025..000000000000
--- a/arch/x86/oprofile/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
- oprof.o cpu_buffer.o buffer_sync.o \
- event_buffer.o oprofile_files.o \
- oprofilefs.o oprofile_stats.o \
- timer_int.o nmi_timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_X86_LOCAL_APIC) += nmi_int.o op_model_amd.o \
- op_model_ppro.o op_model_p4.o
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
deleted file mode 100644
index 1d8391fcca68..000000000000
--- a/arch/x86/oprofile/backtrace.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/**
- * @file backtrace.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author David Smith
- */
-
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/compat.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-#include <asm/unwind.h>
-
-#ifdef CONFIG_COMPAT
-static struct stack_frame_ia32 *
-dump_user_backtrace_32(struct stack_frame_ia32 *head)
-{
- /* Also check accessibility of one struct frame_head beyond: */
- struct stack_frame_ia32 bufhead[2];
- struct stack_frame_ia32 *fp;
- unsigned long bytes;
-
- bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
- if (bytes != 0)
- return NULL;
-
- fp = (struct stack_frame_ia32 *) compat_ptr(bufhead[0].next_frame);
-
- oprofile_add_trace(bufhead[0].return_address);
-
- /* frame pointers should strictly progress back up the stack
- * (towards higher addresses) */
- if (head >= fp)
- return NULL;
-
- return fp;
-}
-
-static inline int
-x86_backtrace_32(struct pt_regs * const regs, unsigned int depth)
-{
- struct stack_frame_ia32 *head;
-
- /* User process is IA32 */
- if (!current || user_64bit_mode(regs))
- return 0;
-
- head = (struct stack_frame_ia32 *) regs->bp;
- while (depth-- && head)
- head = dump_user_backtrace_32(head);
-
- return 1;
-}
-
-#else
-static inline int
-x86_backtrace_32(struct pt_regs * const regs, unsigned int depth)
-{
- return 0;
-}
-#endif /* CONFIG_COMPAT */
-
-static struct stack_frame *dump_user_backtrace(struct stack_frame *head)
-{
- /* Also check accessibility of one struct frame_head beyond: */
- struct stack_frame bufhead[2];
- unsigned long bytes;
-
- bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
- if (bytes != 0)
- return NULL;
-
- oprofile_add_trace(bufhead[0].return_address);
-
- /* frame pointers should strictly progress back up the stack
- * (towards higher addresses) */
- if (head >= bufhead[0].next_frame)
- return NULL;
-
- return bufhead[0].next_frame;
-}
-
-void
-x86_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
- struct stack_frame *head = (struct stack_frame *)frame_pointer(regs);
-
- if (!user_mode(regs)) {
- struct unwind_state state;
- unsigned long addr;
-
- if (!depth)
- return;
-
- oprofile_add_trace(regs->ip);
-
- if (!--depth)
- return;
-
- for (unwind_start(&state, current, regs, NULL);
- !unwind_done(&state); unwind_next_frame(&state)) {
- addr = unwind_get_return_address(&state);
- if (!addr)
- break;
-
- oprofile_add_trace(addr);
-
- if (!--depth)
- break;
- }
-
- return;
- }
-
- if (x86_backtrace_32(regs, depth))
- return;
-
- while (depth-- && head)
- head = dump_user_backtrace(head);
-}
diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c
deleted file mode 100644
index 9e138d00ad36..000000000000
--- a/arch/x86/oprofile/init.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@...ementarian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-/*
- * We support CPUs that have performance counters like the Pentium Pro
- * with the NMI mode driver.
- */
-
-#ifdef CONFIG_X86_LOCAL_APIC
-extern int op_nmi_init(struct oprofile_operations *ops);
-extern void op_nmi_exit(void);
-#else
-static int op_nmi_init(struct oprofile_operations *ops) { return -ENODEV; }
-static void op_nmi_exit(void) { }
-#endif
-
-extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- ops->backtrace = x86_backtrace;
- return op_nmi_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
- op_nmi_exit();
-}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
deleted file mode 100644
index a7a7677265b6..000000000000
--- a/arch/x86/oprofile/nmi_int.c
+++ /dev/null
@@ -1,780 +0,0 @@
-/**
- * @file nmi_int.c
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@...ementarian.org>
- * @author Robert Richter <robert.richter@....com>
- * @author Barry Kasindorf <barry.kasindorf@....com>
- * @author Jason Yeh <jason.yeh@....com>
- * @author Suravee Suthikulpanit <suravee.suthikulpanit@....com>
- */
-
-#include <linux/init.h>
-#include <linux/notifier.h>
-#include <linux/smp.h>
-#include <linux/oprofile.h>
-#include <linux/syscore_ops.h>
-#include <linux/slab.h>
-#include <linux/moduleparam.h>
-#include <linux/kdebug.h>
-#include <linux/cpu.h>
-#include <asm/nmi.h>
-#include <asm/msr.h>
-#include <asm/apic.h>
-
-#include "op_counter.h"
-#include "op_x86_model.h"
-
-static struct op_x86_model_spec *model;
-static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
-static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
-
-/* must be protected with get_online_cpus()/put_online_cpus(): */
-static int nmi_enabled;
-static int ctr_running;
-
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
-/* common functions */
-
-u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
- struct op_counter_config *counter_config)
-{
- u64 val = 0;
- u16 event = (u16)counter_config->event;
-
- val |= ARCH_PERFMON_EVENTSEL_INT;
- val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
- val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
- val |= (counter_config->unit_mask & 0xFF) << 8;
- counter_config->extra &= (ARCH_PERFMON_EVENTSEL_INV |
- ARCH_PERFMON_EVENTSEL_EDGE |
- ARCH_PERFMON_EVENTSEL_CMASK);
- val |= counter_config->extra;
- event &= model->event_mask ? model->event_mask : 0xFF;
- val |= event & 0xFF;
- val |= (u64)(event & 0x0F00) << 24;
-
- return val;
-}
-
-
-static int profile_exceptions_notify(unsigned int val, struct pt_regs *regs)
-{
- if (ctr_running)
- model->check_ctrs(regs, this_cpu_ptr(&cpu_msrs));
- else if (!nmi_enabled)
- return NMI_DONE;
- else
- model->stop(this_cpu_ptr(&cpu_msrs));
- return NMI_HANDLED;
-}
-
-static void nmi_cpu_save_registers(struct op_msrs *msrs)
-{
- struct op_msr *counters = msrs->counters;
- struct op_msr *controls = msrs->controls;
- unsigned int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- if (counters[i].addr)
- rdmsrl(counters[i].addr, counters[i].saved);
- }
-
- for (i = 0; i < model->num_controls; ++i) {
- if (controls[i].addr)
- rdmsrl(controls[i].addr, controls[i].saved);
- }
-}
-
-static void nmi_cpu_start(void *dummy)
-{
- struct op_msrs const *msrs = this_cpu_ptr(&cpu_msrs);
- if (!msrs->controls)
- WARN_ON_ONCE(1);
- else
- model->start(msrs);
-}
-
-static int nmi_start(void)
-{
- get_online_cpus();
- ctr_running = 1;
- /* make ctr_running visible to the nmi handler: */
- smp_mb();
- on_each_cpu(nmi_cpu_start, NULL, 1);
- put_online_cpus();
- return 0;
-}
-
-static void nmi_cpu_stop(void *dummy)
-{
- struct op_msrs const *msrs = this_cpu_ptr(&cpu_msrs);
- if (!msrs->controls)
- WARN_ON_ONCE(1);
- else
- model->stop(msrs);
-}
-
-static void nmi_stop(void)
-{
- get_online_cpus();
- on_each_cpu(nmi_cpu_stop, NULL, 1);
- ctr_running = 0;
- put_online_cpus();
-}
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static DEFINE_PER_CPU(int, switch_index);
-
-static inline int has_mux(void)
-{
- return !!model->switch_ctrl;
-}
-
-inline int op_x86_phys_to_virt(int phys)
-{
- return __this_cpu_read(switch_index) + phys;
-}
-
-inline int op_x86_virt_to_phys(int virt)
-{
- return virt % model->num_counters;
-}
-
-static void nmi_shutdown_mux(void)
-{
- int i;
-
- if (!has_mux())
- return;
-
- for_each_possible_cpu(i) {
- kfree(per_cpu(cpu_msrs, i).multiplex);
- per_cpu(cpu_msrs, i).multiplex = NULL;
- per_cpu(switch_index, i) = 0;
- }
-}
-
-static int nmi_setup_mux(void)
-{
- size_t multiplex_size =
- sizeof(struct op_msr) * model->num_virt_counters;
- int i;
-
- if (!has_mux())
- return 1;
-
- for_each_possible_cpu(i) {
- per_cpu(cpu_msrs, i).multiplex =
- kzalloc(multiplex_size, GFP_KERNEL);
- if (!per_cpu(cpu_msrs, i).multiplex)
- return 0;
- }
-
- return 1;
-}
-
-static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
-{
- int i;
- struct op_msr *multiplex = msrs->multiplex;
-
- if (!has_mux())
- return;
-
- for (i = 0; i < model->num_virt_counters; ++i) {
- if (counter_config[i].enabled) {
- multiplex[i].saved = -(u64)counter_config[i].count;
- } else {
- multiplex[i].saved = 0;
- }
- }
-
- per_cpu(switch_index, cpu) = 0;
-}
-
-static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
-{
- struct op_msr *counters = msrs->counters;
- struct op_msr *multiplex = msrs->multiplex;
- int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- int virt = op_x86_phys_to_virt(i);
- if (counters[i].addr)
- rdmsrl(counters[i].addr, multiplex[virt].saved);
- }
-}
-
-static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
-{
- struct op_msr *counters = msrs->counters;
- struct op_msr *multiplex = msrs->multiplex;
- int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- int virt = op_x86_phys_to_virt(i);
- if (counters[i].addr)
- wrmsrl(counters[i].addr, multiplex[virt].saved);
- }
-}
-
-static void nmi_cpu_switch(void *dummy)
-{
- int cpu = smp_processor_id();
- int si = per_cpu(switch_index, cpu);
- struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
- nmi_cpu_stop(NULL);
- nmi_cpu_save_mpx_registers(msrs);
-
- /* move to next set */
- si += model->num_counters;
- if ((si >= model->num_virt_counters) || (counter_config[si].count == 0))
- per_cpu(switch_index, cpu) = 0;
- else
- per_cpu(switch_index, cpu) = si;
-
- model->switch_ctrl(model, msrs);
- nmi_cpu_restore_mpx_registers(msrs);
-
- nmi_cpu_start(NULL);
-}
-
-
-/*
- * Quick check to see if multiplexing is necessary.
- * The check should be sufficient since counters are used
- * in ordre.
- */
-static int nmi_multiplex_on(void)
-{
- return counter_config[model->num_counters].count ? 0 : -EINVAL;
-}
-
-static int nmi_switch_event(void)
-{
- if (!has_mux())
- return -ENOSYS; /* not implemented */
- if (nmi_multiplex_on() < 0)
- return -EINVAL; /* not necessary */
-
- get_online_cpus();
- if (ctr_running)
- on_each_cpu(nmi_cpu_switch, NULL, 1);
- put_online_cpus();
-
- return 0;
-}
-
-static inline void mux_init(struct oprofile_operations *ops)
-{
- if (has_mux())
- ops->switch_events = nmi_switch_event;
-}
-
-static void mux_clone(int cpu)
-{
- if (!has_mux())
- return;
-
- memcpy(per_cpu(cpu_msrs, cpu).multiplex,
- per_cpu(cpu_msrs, 0).multiplex,
- sizeof(struct op_msr) * model->num_virt_counters);
-}
-
-#else
-
-inline int op_x86_phys_to_virt(int phys) { return phys; }
-inline int op_x86_virt_to_phys(int virt) { return virt; }
-static inline void nmi_shutdown_mux(void) { }
-static inline int nmi_setup_mux(void) { return 1; }
-static inline void
-nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
-static inline void mux_init(struct oprofile_operations *ops) { }
-static void mux_clone(int cpu) { }
-
-#endif
-
-static void free_msrs(void)
-{
- int i;
- for_each_possible_cpu(i) {
- kfree(per_cpu(cpu_msrs, i).counters);
- per_cpu(cpu_msrs, i).counters = NULL;
- kfree(per_cpu(cpu_msrs, i).controls);
- per_cpu(cpu_msrs, i).controls = NULL;
- }
- nmi_shutdown_mux();
-}
-
-static int allocate_msrs(void)
-{
- size_t controls_size = sizeof(struct op_msr) * model->num_controls;
- size_t counters_size = sizeof(struct op_msr) * model->num_counters;
-
- int i;
- for_each_possible_cpu(i) {
- per_cpu(cpu_msrs, i).counters = kzalloc(counters_size,
- GFP_KERNEL);
- if (!per_cpu(cpu_msrs, i).counters)
- goto fail;
- per_cpu(cpu_msrs, i).controls = kzalloc(controls_size,
- GFP_KERNEL);
- if (!per_cpu(cpu_msrs, i).controls)
- goto fail;
- }
-
- if (!nmi_setup_mux())
- goto fail;
-
- return 1;
-
-fail:
- free_msrs();
- return 0;
-}
-
-static void nmi_cpu_setup(void)
-{
- int cpu = smp_processor_id();
- struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
- nmi_cpu_save_registers(msrs);
- raw_spin_lock(&oprofilefs_lock);
- model->setup_ctrs(model, msrs);
- nmi_cpu_setup_mux(cpu, msrs);
- raw_spin_unlock(&oprofilefs_lock);
- per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
-}
-
-static void nmi_cpu_restore_registers(struct op_msrs *msrs)
-{
- struct op_msr *counters = msrs->counters;
- struct op_msr *controls = msrs->controls;
- unsigned int i;
-
- for (i = 0; i < model->num_controls; ++i) {
- if (controls[i].addr)
- wrmsrl(controls[i].addr, controls[i].saved);
- }
-
- for (i = 0; i < model->num_counters; ++i) {
- if (counters[i].addr)
- wrmsrl(counters[i].addr, counters[i].saved);
- }
-}
-
-static void nmi_cpu_shutdown(void)
-{
- unsigned int v;
- int cpu = smp_processor_id();
- struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
- /* restoring APIC_LVTPC can trigger an apic error because the delivery
- * mode and vector nr combination can be illegal. That's by design: on
- * power on apic lvt contain a zero vector nr which are legal only for
- * NMI delivery mode. So inhibit apic err before restoring lvtpc
- */
- v = apic_read(APIC_LVTERR);
- apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
- apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
- apic_write(APIC_LVTERR, v);
- nmi_cpu_restore_registers(msrs);
-}
-
-static int nmi_cpu_online(unsigned int cpu)
-{
- local_irq_disable();
- if (nmi_enabled)
- nmi_cpu_setup();
- if (ctr_running)
- nmi_cpu_start(NULL);
- local_irq_enable();
- return 0;
-}
-
-static int nmi_cpu_down_prep(unsigned int cpu)
-{
- local_irq_disable();
- if (ctr_running)
- nmi_cpu_stop(NULL);
- if (nmi_enabled)
- nmi_cpu_shutdown();
- local_irq_enable();
- return 0;
-}
-
-static int nmi_create_files(struct dentry *root)
-{
- unsigned int i;
-
- for (i = 0; i < model->num_virt_counters; ++i) {
- struct dentry *dir;
- char buf[4];
-
- /* quick little hack to _not_ expose a counter if it is not
- * available for use. This should protect userspace app.
- * NOTE: assumes 1:1 mapping here (that counters are organized
- * sequentially in their struct assignment).
- */
- if (!avail_to_resrv_perfctr_nmi_bit(op_x86_virt_to_phys(i)))
- continue;
-
- snprintf(buf, sizeof(buf), "%d", i);
- dir = oprofilefs_mkdir(root, buf);
- oprofilefs_create_ulong(dir, "enabled", &counter_config[i].enabled);
- oprofilefs_create_ulong(dir, "event", &counter_config[i].event);
- oprofilefs_create_ulong(dir, "count", &counter_config[i].count);
- oprofilefs_create_ulong(dir, "unit_mask", &counter_config[i].unit_mask);
- oprofilefs_create_ulong(dir, "kernel", &counter_config[i].kernel);
- oprofilefs_create_ulong(dir, "user", &counter_config[i].user);
- oprofilefs_create_ulong(dir, "extra", &counter_config[i].extra);
- }
-
- return 0;
-}
-
-static enum cpuhp_state cpuhp_nmi_online;
-
-static int nmi_setup(void)
-{
- int err = 0;
- int cpu;
-
- if (!allocate_msrs())
- return -ENOMEM;
-
- /* We need to serialize save and setup for HT because the subset
- * of msrs are distinct for save and setup operations
- */
-
- /* Assume saved/restored counters are the same on all CPUs */
- err = model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
- if (err)
- goto fail;
-
- for_each_possible_cpu(cpu) {
- if (!IS_ENABLED(CONFIG_SMP) || !cpu)
- continue;
-
- memcpy(per_cpu(cpu_msrs, cpu).counters,
- per_cpu(cpu_msrs, 0).counters,
- sizeof(struct op_msr) * model->num_counters);
-
- memcpy(per_cpu(cpu_msrs, cpu).controls,
- per_cpu(cpu_msrs, 0).controls,
- sizeof(struct op_msr) * model->num_controls);
-
- mux_clone(cpu);
- }
-
- nmi_enabled = 0;
- ctr_running = 0;
- /* make variables visible to the nmi handler: */
- smp_mb();
- err = register_nmi_handler(NMI_LOCAL, profile_exceptions_notify,
- 0, "oprofile");
- if (err)
- goto fail;
-
- nmi_enabled = 1;
- /* make nmi_enabled visible to the nmi handler: */
- smp_mb();
- err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/oprofile:online",
- nmi_cpu_online, nmi_cpu_down_prep);
- if (err < 0)
- goto fail_nmi;
- cpuhp_nmi_online = err;
- return 0;
-fail_nmi:
- unregister_nmi_handler(NMI_LOCAL, "oprofile");
-fail:
- free_msrs();
- return err;
-}
-
-static void nmi_shutdown(void)
-{
- struct op_msrs *msrs;
-
- cpuhp_remove_state(cpuhp_nmi_online);
- nmi_enabled = 0;
- ctr_running = 0;
-
- /* make variables visible to the nmi handler: */
- smp_mb();
- unregister_nmi_handler(NMI_LOCAL, "oprofile");
- msrs = &get_cpu_var(cpu_msrs);
- model->shutdown(msrs);
- free_msrs();
- put_cpu_var(cpu_msrs);
-}
-
-#ifdef CONFIG_PM
-
-static int nmi_suspend(void)
-{
- /* Only one CPU left, just stop that one */
- if (nmi_enabled == 1)
- nmi_cpu_stop(NULL);
- return 0;
-}
-
-static void nmi_resume(void)
-{
- if (nmi_enabled == 1)
- nmi_cpu_start(NULL);
-}
-
-static struct syscore_ops oprofile_syscore_ops = {
- .resume = nmi_resume,
- .suspend = nmi_suspend,
-};
-
-static void __init init_suspend_resume(void)
-{
- register_syscore_ops(&oprofile_syscore_ops);
-}
-
-static void exit_suspend_resume(void)
-{
- unregister_syscore_ops(&oprofile_syscore_ops);
-}
-
-#else
-
-static inline void init_suspend_resume(void) { }
-static inline void exit_suspend_resume(void) { }
-
-#endif /* CONFIG_PM */
-
-static int __init p4_init(char **cpu_type)
-{
- __u8 cpu_model = boot_cpu_data.x86_model;
-
- if (cpu_model > 6 || cpu_model == 5)
- return 0;
-
-#ifndef CONFIG_SMP
- *cpu_type = "i386/p4";
- model = &op_p4_spec;
- return 1;
-#else
- switch (smp_num_siblings) {
- case 1:
- *cpu_type = "i386/p4";
- model = &op_p4_spec;
- return 1;
-
- case 2:
- *cpu_type = "i386/p4-ht";
- model = &op_p4_ht2_spec;
- return 1;
- }
-#endif
-
- printk(KERN_INFO "oprofile: P4 HyperThreading detected with > 2 threads\n");
- printk(KERN_INFO "oprofile: Reverting to timer mode.\n");
- return 0;
-}
-
-enum __force_cpu_type {
- reserved = 0, /* do not force */
- timer,
- arch_perfmon,
-};
-
-static int force_cpu_type;
-
-static int set_cpu_type(const char *str, const struct kernel_param *kp)
-{
- if (!strcmp(str, "timer")) {
- force_cpu_type = timer;
- printk(KERN_INFO "oprofile: forcing NMI timer mode\n");
- } else if (!strcmp(str, "arch_perfmon")) {
- force_cpu_type = arch_perfmon;
- printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
- } else {
- force_cpu_type = 0;
- }
-
- return 0;
-}
-module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
-
-static int __init ppro_init(char **cpu_type)
-{
- __u8 cpu_model = boot_cpu_data.x86_model;
- struct op_x86_model_spec *spec = &op_ppro_spec; /* default */
-
- if (force_cpu_type == arch_perfmon && boot_cpu_has(X86_FEATURE_ARCH_PERFMON))
- return 0;
-
- /*
- * Documentation on identifying Intel processors by CPU family
- * and model can be found in the Intel Software Developer's
- * Manuals (SDM):
- *
- * http://www.intel.com/products/processor/manuals/
- *
- * As of May 2010 the documentation for this was in the:
- * "Intel 64 and IA-32 Architectures Software Developer's
- * Manual Volume 3B: System Programming Guide", "Table B-1
- * CPUID Signature Values of DisplayFamily_DisplayModel".
- */
- switch (cpu_model) {
- case 0 ... 2:
- *cpu_type = "i386/ppro";
- break;
- case 3 ... 5:
- *cpu_type = "i386/pii";
- break;
- case 6 ... 8:
- case 10 ... 11:
- *cpu_type = "i386/piii";
- break;
- case 9:
- case 13:
- *cpu_type = "i386/p6_mobile";
- break;
- case 14:
- *cpu_type = "i386/core";
- break;
- case 0x0f:
- case 0x16:
- case 0x17:
- case 0x1d:
- *cpu_type = "i386/core_2";
- break;
- case 0x1a:
- case 0x1e:
- case 0x2e:
- spec = &op_arch_perfmon_spec;
- *cpu_type = "i386/core_i7";
- break;
- case 0x1c:
- *cpu_type = "i386/atom";
- break;
- default:
- /* Unknown */
- return 0;
- }
-
- model = spec;
- return 1;
-}
-
-int __init op_nmi_init(struct oprofile_operations *ops)
-{
- __u8 vendor = boot_cpu_data.x86_vendor;
- __u8 family = boot_cpu_data.x86;
- char *cpu_type = NULL;
- int ret = 0;
-
- if (!boot_cpu_has(X86_FEATURE_APIC))
- return -ENODEV;
-
- if (force_cpu_type == timer)
- return -ENODEV;
-
- switch (vendor) {
- case X86_VENDOR_AMD:
- /* Needs to be at least an Athlon (or hammer in 32bit mode) */
-
- switch (family) {
- case 6:
- cpu_type = "i386/athlon";
- break;
- case 0xf:
- /*
- * Actually it could be i386/hammer too, but
- * give user space an consistent name.
- */
- cpu_type = "x86-64/hammer";
- break;
- case 0x10:
- cpu_type = "x86-64/family10";
- break;
- case 0x11:
- cpu_type = "x86-64/family11h";
- break;
- case 0x12:
- cpu_type = "x86-64/family12h";
- break;
- case 0x14:
- cpu_type = "x86-64/family14h";
- break;
- case 0x15:
- cpu_type = "x86-64/family15h";
- break;
- default:
- return -ENODEV;
- }
- model = &op_amd_spec;
- break;
-
- case X86_VENDOR_INTEL:
- switch (family) {
- /* Pentium IV */
- case 0xf:
- p4_init(&cpu_type);
- break;
-
- /* A P6-class processor */
- case 6:
- ppro_init(&cpu_type);
- break;
-
- default:
- break;
- }
-
- if (cpu_type)
- break;
-
- if (!boot_cpu_has(X86_FEATURE_ARCH_PERFMON))
- return -ENODEV;
-
- /* use arch perfmon as fallback */
- cpu_type = "i386/arch_perfmon";
- model = &op_arch_perfmon_spec;
- break;
-
- default:
- return -ENODEV;
- }
-
- /* default values, can be overwritten by model */
- ops->create_files = nmi_create_files;
- ops->setup = nmi_setup;
- ops->shutdown = nmi_shutdown;
- ops->start = nmi_start;
- ops->stop = nmi_stop;
- ops->cpu_type = cpu_type;
-
- if (model->init)
- ret = model->init(ops);
- if (ret)
- return ret;
-
- if (!model->num_virt_counters)
- model->num_virt_counters = model->num_counters;
-
- mux_init(ops);
-
- init_suspend_resume();
-
- printk(KERN_INFO "oprofile: using NMI interrupt.\n");
- return 0;
-}
-
-void op_nmi_exit(void)
-{
- exit_suspend_resume();
-}
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
deleted file mode 100644
index 0b7b7b179cbe..000000000000
--- a/arch/x86/oprofile/op_counter.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/**
- * @file op_counter.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- */
-
-#ifndef OP_COUNTER_H
-#define OP_COUNTER_H
-
-#define OP_MAX_COUNTER 32
-
-/* Per-perfctr configuration as set via
- * oprofilefs.
- */
-struct op_counter_config {
- unsigned long count;
- unsigned long enabled;
- unsigned long event;
- unsigned long kernel;
- unsigned long user;
- unsigned long unit_mask;
- unsigned long extra;
-};
-
-extern struct op_counter_config counter_config[];
-
-#endif /* OP_COUNTER_H */
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
deleted file mode 100644
index 660a83c8287b..000000000000
--- a/arch/x86/oprofile/op_model_amd.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
- * @file op_model_amd.c
- * athlon / K7 / K8 / Family 10h model-specific MSR operations
- *
- * @remark Copyright 2002-2009 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author Philippe Elie
- * @author Graydon Hoare
- * @author Robert Richter <robert.richter@....com>
- * @author Barry Kasindorf <barry.kasindorf@....com>
- * @author Jason Yeh <jason.yeh@....com>
- * @author Suravee Suthikulpanit <suravee.suthikulpanit@....com>
- */
-
-#include <linux/oprofile.h>
-#include <linux/device.h>
-#include <linux/pci.h>
-#include <linux/percpu.h>
-
-#include <asm/ptrace.h>
-#include <asm/msr.h>
-#include <asm/nmi.h>
-#include <asm/apic.h>
-#include <asm/processor.h>
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-#define NUM_VIRT_COUNTERS 32
-#else
-#define NUM_VIRT_COUNTERS 0
-#endif
-
-#define OP_EVENT_MASK 0x0FFF
-#define OP_CTR_OVERFLOW (1ULL<<31)
-
-#define MSR_AMD_EVENTSEL_RESERVED ((0xFFFFFCF0ULL<<32)|(1ULL<<21))
-
-static int num_counters;
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-#define IBS_FETCH_SIZE 6
-#define IBS_OP_SIZE 12
-
-static u32 ibs_caps;
-
-struct ibs_config {
- unsigned long op_enabled;
- unsigned long fetch_enabled;
- unsigned long max_cnt_fetch;
- unsigned long max_cnt_op;
- unsigned long rand_en;
- unsigned long dispatched_ops;
- unsigned long branch_target;
-};
-
-struct ibs_state {
- u64 ibs_op_ctl;
- int branch_target;
- unsigned long sample_size;
-};
-
-static struct ibs_config ibs_config;
-static struct ibs_state ibs_state;
-
-/*
- * IBS randomization macros
- */
-#define IBS_RANDOM_BITS 12
-#define IBS_RANDOM_MASK ((1ULL << IBS_RANDOM_BITS) - 1)
-#define IBS_RANDOM_MAXCNT_OFFSET (1ULL << (IBS_RANDOM_BITS - 5))
-
-/*
- * 16-bit Linear Feedback Shift Register (LFSR)
- *
- * 16 14 13 11
- * Feedback polynomial = X + X + X + X + 1
- */
-static unsigned int lfsr_random(void)
-{
- static unsigned int lfsr_value = 0xF00D;
- unsigned int bit;
-
- /* Compute next bit to shift in */
- bit = ((lfsr_value >> 0) ^
- (lfsr_value >> 2) ^
- (lfsr_value >> 3) ^
- (lfsr_value >> 5)) & 0x0001;
-
- /* Advance to next register value */
- lfsr_value = (lfsr_value >> 1) | (bit << 15);
-
- return lfsr_value;
-}
-
-/*
- * IBS software randomization
- *
- * The IBS periodic op counter is randomized in software. The lower 12
- * bits of the 20 bit counter are randomized. IbsOpCurCnt is
- * initialized with a 12 bit random value.
- */
-static inline u64 op_amd_randomize_ibs_op(u64 val)
-{
- unsigned int random = lfsr_random();
-
- if (!(ibs_caps & IBS_CAPS_RDWROPCNT))
- /*
- * Work around if the hw can not write to IbsOpCurCnt
- *
- * Randomize the lower 8 bits of the 16 bit
- * IbsOpMaxCnt [15:0] value in the range of -128 to
- * +127 by adding/subtracting an offset to the
- * maximum count (IbsOpMaxCnt).
- *
- * To avoid over or underflows and protect upper bits
- * starting at bit 16, the initial value for
- * IbsOpMaxCnt must fit in the range from 0x0081 to
- * 0xff80.
- */
- val += (s8)(random >> 4);
- else
- val |= (u64)(random & IBS_RANDOM_MASK) << 32;
-
- return val;
-}
-
-static inline void
-op_amd_handle_ibs(struct pt_regs * const regs,
- struct op_msrs const * const msrs)
-{
- u64 val, ctl;
- struct op_entry entry;
-
- if (!ibs_caps)
- return;
-
- if (ibs_config.fetch_enabled) {
- rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
- if (ctl & IBS_FETCH_VAL) {
- rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
- oprofile_write_reserve(&entry, regs, val,
- IBS_FETCH_CODE, IBS_FETCH_SIZE);
- oprofile_add_data64(&entry, val);
- oprofile_add_data64(&entry, ctl);
- rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
- oprofile_add_data64(&entry, val);
- oprofile_write_commit(&entry);
-
- /* reenable the IRQ */
- ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT);
- ctl |= IBS_FETCH_ENABLE;
- wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
- }
- }
-
- if (ibs_config.op_enabled) {
- rdmsrl(MSR_AMD64_IBSOPCTL, ctl);
- if (ctl & IBS_OP_VAL) {
- rdmsrl(MSR_AMD64_IBSOPRIP, val);
- oprofile_write_reserve(&entry, regs, val, IBS_OP_CODE,
- ibs_state.sample_size);
- oprofile_add_data64(&entry, val);
- rdmsrl(MSR_AMD64_IBSOPDATA, val);
- oprofile_add_data64(&entry, val);
- rdmsrl(MSR_AMD64_IBSOPDATA2, val);
- oprofile_add_data64(&entry, val);
- rdmsrl(MSR_AMD64_IBSOPDATA3, val);
- oprofile_add_data64(&entry, val);
- rdmsrl(MSR_AMD64_IBSDCLINAD, val);
- oprofile_add_data64(&entry, val);
- rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
- oprofile_add_data64(&entry, val);
- if (ibs_state.branch_target) {
- rdmsrl(MSR_AMD64_IBSBRTARGET, val);
- oprofile_add_data(&entry, (unsigned long)val);
- }
- oprofile_write_commit(&entry);
-
- /* reenable the IRQ */
- ctl = op_amd_randomize_ibs_op(ibs_state.ibs_op_ctl);
- wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
- }
- }
-}
-
-static inline void op_amd_start_ibs(void)
-{
- u64 val;
-
- if (!ibs_caps)
- return;
-
- memset(&ibs_state, 0, sizeof(ibs_state));
-
- /*
- * Note: Since the max count settings may out of range we
- * write back the actual used values so that userland can read
- * it.
- */
-
- if (ibs_config.fetch_enabled) {
- val = ibs_config.max_cnt_fetch >> 4;
- val = min(val, IBS_FETCH_MAX_CNT);
- ibs_config.max_cnt_fetch = val << 4;
- val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
- val |= IBS_FETCH_ENABLE;
- wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
- }
-
- if (ibs_config.op_enabled) {
- val = ibs_config.max_cnt_op >> 4;
- if (!(ibs_caps & IBS_CAPS_RDWROPCNT)) {
- /*
- * IbsOpCurCnt not supported. See
- * op_amd_randomize_ibs_op() for details.
- */
- val = clamp(val, 0x0081ULL, 0xFF80ULL);
- ibs_config.max_cnt_op = val << 4;
- } else {
- /*
- * The start value is randomized with a
- * positive offset, we need to compensate it
- * with the half of the randomized range. Also
- * avoid underflows.
- */
- val += IBS_RANDOM_MAXCNT_OFFSET;
- if (ibs_caps & IBS_CAPS_OPCNTEXT)
- val = min(val, IBS_OP_MAX_CNT_EXT);
- else
- val = min(val, IBS_OP_MAX_CNT);
- ibs_config.max_cnt_op =
- (val - IBS_RANDOM_MAXCNT_OFFSET) << 4;
- }
- val = ((val & ~IBS_OP_MAX_CNT) << 4) | (val & IBS_OP_MAX_CNT);
- val |= ibs_config.dispatched_ops ? IBS_OP_CNT_CTL : 0;
- val |= IBS_OP_ENABLE;
- ibs_state.ibs_op_ctl = val;
- ibs_state.sample_size = IBS_OP_SIZE;
- if (ibs_config.branch_target) {
- ibs_state.branch_target = 1;
- ibs_state.sample_size++;
- }
- val = op_amd_randomize_ibs_op(ibs_state.ibs_op_ctl);
- wrmsrl(MSR_AMD64_IBSOPCTL, val);
- }
-}
-
-static void op_amd_stop_ibs(void)
-{
- if (!ibs_caps)
- return;
-
- if (ibs_config.fetch_enabled)
- /* clear max count and enable */
- wrmsrl(MSR_AMD64_IBSFETCHCTL, 0);
-
- if (ibs_config.op_enabled)
- /* clear max count and enable */
- wrmsrl(MSR_AMD64_IBSOPCTL, 0);
-}
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
- struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- /* enable active counters */
- for (i = 0; i < num_counters; ++i) {
- int virt = op_x86_phys_to_virt(i);
- if (!reset_value[virt])
- continue;
- rdmsrl(msrs->controls[i].addr, val);
- val &= model->reserved;
- val |= op_x86_get_ctrl(model, &counter_config[virt]);
- wrmsrl(msrs->controls[i].addr, val);
- }
-}
-
-#endif
-
-/* functions for op_amd_spec */
-
-static void op_amd_shutdown(struct op_msrs const * const msrs)
-{
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (!msrs->counters[i].addr)
- continue;
- release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
- release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
- }
-}
-
-static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
-{
- int i;
-
- for (i = 0; i < num_counters; i++) {
- if (!reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
- goto fail;
- if (!reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) {
- release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
- goto fail;
- }
- /* both registers must be reserved */
- if (num_counters == AMD64_NUM_COUNTERS_CORE) {
- msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1);
- msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1);
- } else {
- msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
- msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
- }
- continue;
- fail:
- if (!counter_config[i].enabled)
- continue;
- op_x86_warn_reserved(i);
- op_amd_shutdown(msrs);
- return -EBUSY;
- }
-
- return 0;
-}
-
-static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
- struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- /* setup reset_value */
- for (i = 0; i < OP_MAX_COUNTER; ++i) {
- if (counter_config[i].enabled
- && msrs->counters[op_x86_virt_to_phys(i)].addr)
- reset_value[i] = counter_config[i].count;
- else
- reset_value[i] = 0;
- }
-
- /* clear all counters */
- for (i = 0; i < num_counters; ++i) {
- if (!msrs->controls[i].addr)
- continue;
- rdmsrl(msrs->controls[i].addr, val);
- if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
- op_x86_warn_in_use(i);
- val &= model->reserved;
- wrmsrl(msrs->controls[i].addr, val);
- /*
- * avoid a false detection of ctr overflows in NMI
- * handler
- */
- wrmsrl(msrs->counters[i].addr, -1LL);
- }
-
- /* enable active counters */
- for (i = 0; i < num_counters; ++i) {
- int virt = op_x86_phys_to_virt(i);
- if (!reset_value[virt])
- continue;
-
- /* setup counter registers */
- wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
-
- /* setup control registers */
- rdmsrl(msrs->controls[i].addr, val);
- val &= model->reserved;
- val |= op_x86_get_ctrl(model, &counter_config[virt]);
- wrmsrl(msrs->controls[i].addr, val);
- }
-}
-
-static int op_amd_check_ctrs(struct pt_regs * const regs,
- struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- int virt = op_x86_phys_to_virt(i);
- if (!reset_value[virt])
- continue;
- rdmsrl(msrs->counters[i].addr, val);
- /* bit is clear if overflowed: */
- if (val & OP_CTR_OVERFLOW)
- continue;
- oprofile_add_sample(regs, virt);
- wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
- }
-
- op_amd_handle_ibs(regs, msrs);
-
- /* See op_model_ppro.c */
- return 1;
-}
-
-static void op_amd_start(struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (!reset_value[op_x86_phys_to_virt(i)])
- continue;
- rdmsrl(msrs->controls[i].addr, val);
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
- wrmsrl(msrs->controls[i].addr, val);
- }
-
- op_amd_start_ibs();
-}
-
-static void op_amd_stop(struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- /*
- * Subtle: stop on all counters to avoid race with setting our
- * pm callback
- */
- for (i = 0; i < num_counters; ++i) {
- if (!reset_value[op_x86_phys_to_virt(i)])
- continue;
- rdmsrl(msrs->controls[i].addr, val);
- val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
- wrmsrl(msrs->controls[i].addr, val);
- }
-
- op_amd_stop_ibs();
-}
-
-/*
- * check and reserve APIC extended interrupt LVT offset for IBS if
- * available
- */
-
-static void init_ibs(void)
-{
- ibs_caps = get_ibs_caps();
-
- if (!ibs_caps)
- return;
-
- printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps);
-}
-
-static int (*create_arch_files)(struct dentry *root);
-
-static int setup_ibs_files(struct dentry *root)
-{
- struct dentry *dir;
- int ret = 0;
-
- /* architecture specific files */
- if (create_arch_files)
- ret = create_arch_files(root);
-
- if (ret)
- return ret;
-
- if (!ibs_caps)
- return ret;
-
- /* model specific files */
-
- /* setup some reasonable defaults */
- memset(&ibs_config, 0, sizeof(ibs_config));
- ibs_config.max_cnt_fetch = 250000;
- ibs_config.max_cnt_op = 250000;
-
- if (ibs_caps & IBS_CAPS_FETCHSAM) {
- dir = oprofilefs_mkdir(root, "ibs_fetch");
- oprofilefs_create_ulong(dir, "enable",
- &ibs_config.fetch_enabled);
- oprofilefs_create_ulong(dir, "max_count",
- &ibs_config.max_cnt_fetch);
- oprofilefs_create_ulong(dir, "rand_enable",
- &ibs_config.rand_en);
- }
-
- if (ibs_caps & IBS_CAPS_OPSAM) {
- dir = oprofilefs_mkdir(root, "ibs_op");
- oprofilefs_create_ulong(dir, "enable",
- &ibs_config.op_enabled);
- oprofilefs_create_ulong(dir, "max_count",
- &ibs_config.max_cnt_op);
- if (ibs_caps & IBS_CAPS_OPCNT)
- oprofilefs_create_ulong(dir, "dispatched_ops",
- &ibs_config.dispatched_ops);
- if (ibs_caps & IBS_CAPS_BRNTRGT)
- oprofilefs_create_ulong(dir, "branch_target",
- &ibs_config.branch_target);
- }
-
- return 0;
-}
-
-struct op_x86_model_spec op_amd_spec;
-
-static int op_amd_init(struct oprofile_operations *ops)
-{
- init_ibs();
- create_arch_files = ops->create_files;
- ops->create_files = setup_ibs_files;
-
- if (boot_cpu_data.x86 == 0x15) {
- num_counters = AMD64_NUM_COUNTERS_CORE;
- } else {
- num_counters = AMD64_NUM_COUNTERS;
- }
-
- op_amd_spec.num_counters = num_counters;
- op_amd_spec.num_controls = num_counters;
- op_amd_spec.num_virt_counters = max(num_counters, NUM_VIRT_COUNTERS);
-
- return 0;
-}
-
-struct op_x86_model_spec op_amd_spec = {
- /* num_counters/num_controls filled in at runtime */
- .reserved = MSR_AMD_EVENTSEL_RESERVED,
- .event_mask = OP_EVENT_MASK,
- .init = op_amd_init,
- .fill_in_addresses = &op_amd_fill_in_addresses,
- .setup_ctrs = &op_amd_setup_ctrs,
- .check_ctrs = &op_amd_check_ctrs,
- .start = &op_amd_start,
- .stop = &op_amd_stop,
- .shutdown = &op_amd_shutdown,
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
- .switch_ctrl = &op_mux_switch_ctrl,
-#endif
-};
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
deleted file mode 100644
index ad1d91f475ab..000000000000
--- a/arch/x86/oprofile/op_model_p4.c
+++ /dev/null
@@ -1,723 +0,0 @@
-/**
- * @file op_model_p4.c
- * P4 model-specific MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Graydon Hoare
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <linux/ptrace.h>
-#include <asm/nmi.h>
-#include <asm/msr.h>
-#include <asm/fixmap.h>
-#include <asm/apic.h>
-
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-#define NUM_EVENTS 39
-
-#define NUM_COUNTERS_NON_HT 8
-#define NUM_ESCRS_NON_HT 45
-#define NUM_CCCRS_NON_HT 18
-#define NUM_CONTROLS_NON_HT (NUM_ESCRS_NON_HT + NUM_CCCRS_NON_HT)
-
-#define NUM_COUNTERS_HT2 4
-#define NUM_ESCRS_HT2 23
-#define NUM_CCCRS_HT2 9
-#define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
-
-#define OP_CTR_OVERFLOW (1ULL<<31)
-
-static unsigned int num_counters = NUM_COUNTERS_NON_HT;
-static unsigned int num_controls = NUM_CONTROLS_NON_HT;
-
-/* this has to be checked dynamically since the
- hyper-threadedness of a chip is discovered at
- kernel boot-time. */
-static inline void setup_num_counters(void)
-{
-#ifdef CONFIG_SMP
- if (smp_num_siblings == 2) {
- num_counters = NUM_COUNTERS_HT2;
- num_controls = NUM_CONTROLS_HT2;
- }
-#endif
-}
-
-static inline int addr_increment(void)
-{
-#ifdef CONFIG_SMP
- return smp_num_siblings == 2 ? 2 : 1;
-#else
- return 1;
-#endif
-}
-
-
-/* tables to simulate simplified hardware view of p4 registers */
-struct p4_counter_binding {
- int virt_counter;
- int counter_address;
- int cccr_address;
-};
-
-struct p4_event_binding {
- int escr_select; /* value to put in CCCR */
- int event_select; /* value to put in ESCR */
- struct {
- int virt_counter; /* for this counter... */
- int escr_address; /* use this ESCR */
- } bindings[2];
-};
-
-/* nb: these CTR_* defines are a duplicate of defines in
- event/i386.p4*events. */
-
-
-#define CTR_BPU_0 (1 << 0)
-#define CTR_MS_0 (1 << 1)
-#define CTR_FLAME_0 (1 << 2)
-#define CTR_IQ_4 (1 << 3)
-#define CTR_BPU_2 (1 << 4)
-#define CTR_MS_2 (1 << 5)
-#define CTR_FLAME_2 (1 << 6)
-#define CTR_IQ_5 (1 << 7)
-
-static struct p4_counter_binding p4_counters[NUM_COUNTERS_NON_HT] = {
- { CTR_BPU_0, MSR_P4_BPU_PERFCTR0, MSR_P4_BPU_CCCR0 },
- { CTR_MS_0, MSR_P4_MS_PERFCTR0, MSR_P4_MS_CCCR0 },
- { CTR_FLAME_0, MSR_P4_FLAME_PERFCTR0, MSR_P4_FLAME_CCCR0 },
- { CTR_IQ_4, MSR_P4_IQ_PERFCTR4, MSR_P4_IQ_CCCR4 },
- { CTR_BPU_2, MSR_P4_BPU_PERFCTR2, MSR_P4_BPU_CCCR2 },
- { CTR_MS_2, MSR_P4_MS_PERFCTR2, MSR_P4_MS_CCCR2 },
- { CTR_FLAME_2, MSR_P4_FLAME_PERFCTR2, MSR_P4_FLAME_CCCR2 },
- { CTR_IQ_5, MSR_P4_IQ_PERFCTR5, MSR_P4_IQ_CCCR5 }
-};
-
-#define NUM_UNUSED_CCCRS (NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT)
-
-/* p4 event codes in libop/op_event.h are indices into this table. */
-
-static struct p4_event_binding p4_events[NUM_EVENTS] = {
-
- { /* BRANCH_RETIRED */
- 0x05, 0x06,
- { {CTR_IQ_4, MSR_P4_CRU_ESCR2},
- {CTR_IQ_5, MSR_P4_CRU_ESCR3} }
- },
-
- { /* MISPRED_BRANCH_RETIRED */
- 0x04, 0x03,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR0},
- { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
- },
-
- { /* TC_DELIVER_MODE */
- 0x01, 0x01,
- { { CTR_MS_0, MSR_P4_TC_ESCR0},
- { CTR_MS_2, MSR_P4_TC_ESCR1} }
- },
-
- { /* BPU_FETCH_REQUEST */
- 0x00, 0x03,
- { { CTR_BPU_0, MSR_P4_BPU_ESCR0},
- { CTR_BPU_2, MSR_P4_BPU_ESCR1} }
- },
-
- { /* ITLB_REFERENCE */
- 0x03, 0x18,
- { { CTR_BPU_0, MSR_P4_ITLB_ESCR0},
- { CTR_BPU_2, MSR_P4_ITLB_ESCR1} }
- },
-
- { /* MEMORY_CANCEL */
- 0x05, 0x02,
- { { CTR_FLAME_0, MSR_P4_DAC_ESCR0},
- { CTR_FLAME_2, MSR_P4_DAC_ESCR1} }
- },
-
- { /* MEMORY_COMPLETE */
- 0x02, 0x08,
- { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
- { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
- },
-
- { /* LOAD_PORT_REPLAY */
- 0x02, 0x04,
- { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
- { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
- },
-
- { /* STORE_PORT_REPLAY */
- 0x02, 0x05,
- { { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
- { CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
- },
-
- { /* MOB_LOAD_REPLAY */
- 0x02, 0x03,
- { { CTR_BPU_0, MSR_P4_MOB_ESCR0},
- { CTR_BPU_2, MSR_P4_MOB_ESCR1} }
- },
-
- { /* PAGE_WALK_TYPE */
- 0x04, 0x01,
- { { CTR_BPU_0, MSR_P4_PMH_ESCR0},
- { CTR_BPU_2, MSR_P4_PMH_ESCR1} }
- },
-
- { /* BSQ_CACHE_REFERENCE */
- 0x07, 0x0c,
- { { CTR_BPU_0, MSR_P4_BSU_ESCR0},
- { CTR_BPU_2, MSR_P4_BSU_ESCR1} }
- },
-
- { /* IOQ_ALLOCATION */
- 0x06, 0x03,
- { { CTR_BPU_0, MSR_P4_FSB_ESCR0},
- { 0, 0 } }
- },
-
- { /* IOQ_ACTIVE_ENTRIES */
- 0x06, 0x1a,
- { { CTR_BPU_2, MSR_P4_FSB_ESCR1},
- { 0, 0 } }
- },
-
- { /* FSB_DATA_ACTIVITY */
- 0x06, 0x17,
- { { CTR_BPU_0, MSR_P4_FSB_ESCR0},
- { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
- },
-
- { /* BSQ_ALLOCATION */
- 0x07, 0x05,
- { { CTR_BPU_0, MSR_P4_BSU_ESCR0},
- { 0, 0 } }
- },
-
- { /* BSQ_ACTIVE_ENTRIES */
- 0x07, 0x06,
- { { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},
- { 0, 0 } }
- },
-
- { /* X87_ASSIST */
- 0x05, 0x03,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
- { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
- },
-
- { /* SSE_INPUT_ASSIST */
- 0x01, 0x34,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* PACKED_SP_UOP */
- 0x01, 0x08,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* PACKED_DP_UOP */
- 0x01, 0x0c,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* SCALAR_SP_UOP */
- 0x01, 0x0a,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* SCALAR_DP_UOP */
- 0x01, 0x0e,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* 64BIT_MMX_UOP */
- 0x01, 0x02,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* 128BIT_MMX_UOP */
- 0x01, 0x1a,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* X87_FP_UOP */
- 0x01, 0x04,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* X87_SIMD_MOVES_UOP */
- 0x01, 0x2e,
- { { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
- { CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
- },
-
- { /* MACHINE_CLEAR */
- 0x05, 0x02,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
- { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
- },
-
- { /* GLOBAL_POWER_EVENTS */
- 0x06, 0x13 /* older manual says 0x05, newer 0x13 */,
- { { CTR_BPU_0, MSR_P4_FSB_ESCR0},
- { CTR_BPU_2, MSR_P4_FSB_ESCR1} }
- },
-
- { /* TC_MS_XFER */
- 0x00, 0x05,
- { { CTR_MS_0, MSR_P4_MS_ESCR0},
- { CTR_MS_2, MSR_P4_MS_ESCR1} }
- },
-
- { /* UOP_QUEUE_WRITES */
- 0x00, 0x09,
- { { CTR_MS_0, MSR_P4_MS_ESCR0},
- { CTR_MS_2, MSR_P4_MS_ESCR1} }
- },
-
- { /* FRONT_END_EVENT */
- 0x05, 0x08,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
- { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
- },
-
- { /* EXECUTION_EVENT */
- 0x05, 0x0c,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
- { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
- },
-
- { /* REPLAY_EVENT */
- 0x05, 0x09,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR2},
- { CTR_IQ_5, MSR_P4_CRU_ESCR3} }
- },
-
- { /* INSTR_RETIRED */
- 0x04, 0x02,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR0},
- { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
- },
-
- { /* UOPS_RETIRED */
- 0x04, 0x01,
- { { CTR_IQ_4, MSR_P4_CRU_ESCR0},
- { CTR_IQ_5, MSR_P4_CRU_ESCR1} }
- },
-
- { /* UOP_TYPE */
- 0x02, 0x02,
- { { CTR_IQ_4, MSR_P4_RAT_ESCR0},
- { CTR_IQ_5, MSR_P4_RAT_ESCR1} }
- },
-
- { /* RETIRED_MISPRED_BRANCH_TYPE */
- 0x02, 0x05,
- { { CTR_MS_0, MSR_P4_TBPU_ESCR0},
- { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
- },
-
- { /* RETIRED_BRANCH_TYPE */
- 0x02, 0x04,
- { { CTR_MS_0, MSR_P4_TBPU_ESCR0},
- { CTR_MS_2, MSR_P4_TBPU_ESCR1} }
- }
-};
-
-
-#define MISC_PMC_ENABLED_P(x) ((x) & 1 << 7)
-
-#define ESCR_RESERVED_BITS 0x80000003
-#define ESCR_CLEAR(escr) ((escr) &= ESCR_RESERVED_BITS)
-#define ESCR_SET_USR_0(escr, usr) ((escr) |= (((usr) & 1) << 2))
-#define ESCR_SET_OS_0(escr, os) ((escr) |= (((os) & 1) << 3))
-#define ESCR_SET_USR_1(escr, usr) ((escr) |= (((usr) & 1)))
-#define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
-#define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
-#define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-
-#define CCCR_RESERVED_BITS 0x38030FFF
-#define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
-#define CCCR_SET_REQUIRED_BITS(cccr) ((cccr) |= 0x00030000)
-#define CCCR_SET_ESCR_SELECT(cccr, sel) ((cccr) |= (((sel) & 0x07) << 13))
-#define CCCR_SET_PMI_OVF_0(cccr) ((cccr) |= (1<<26))
-#define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
-#define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
-#define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
-#define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
-
-
-/* this assigns a "stagger" to the current CPU, which is used throughout
- the code in this module as an extra array offset, to select the "even"
- or "odd" part of all the divided resources. */
-static unsigned int get_stagger(void)
-{
-#ifdef CONFIG_SMP
- int cpu = smp_processor_id();
- return cpu != cpumask_first(this_cpu_cpumask_var_ptr(cpu_sibling_map));
-#endif
- return 0;
-}
-
-
-/* finally, mediate access to a real hardware counter
- by passing a "virtual" counter numer to this macro,
- along with your stagger setting. */
-#define VIRT_CTR(stagger, i) ((i) + ((num_counters) * (stagger)))
-
-static unsigned long reset_value[NUM_COUNTERS_NON_HT];
-
-static void p4_shutdown(struct op_msrs const * const msrs)
-{
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (msrs->counters[i].addr)
- release_perfctr_nmi(msrs->counters[i].addr);
- }
- /*
- * some of the control registers are specially reserved in
- * conjunction with the counter registers (hence the starting offset).
- * This saves a few bits.
- */
- for (i = num_counters; i < num_controls; ++i) {
- if (msrs->controls[i].addr)
- release_evntsel_nmi(msrs->controls[i].addr);
- }
-}
-
-static int p4_fill_in_addresses(struct op_msrs * const msrs)
-{
- unsigned int i;
- unsigned int addr, cccraddr, stag;
-
- setup_num_counters();
- stag = get_stagger();
-
- /* the counter & cccr registers we pay attention to */
- for (i = 0; i < num_counters; ++i) {
- addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
- cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address;
- if (reserve_perfctr_nmi(addr)) {
- msrs->counters[i].addr = addr;
- msrs->controls[i].addr = cccraddr;
- }
- }
-
- /* 43 ESCR registers in three or four discontiguous group */
- for (addr = MSR_P4_BSU_ESCR0 + stag;
- addr < MSR_P4_IQ_ESCR0; ++i, addr += addr_increment()) {
- if (reserve_evntsel_nmi(addr))
- msrs->controls[i].addr = addr;
- }
-
- /* no IQ_ESCR0/1 on some models, we save a seconde time BSU_ESCR0/1
- * to avoid special case in nmi_{save|restore}_registers() */
- if (boot_cpu_data.x86_model >= 0x3) {
- for (addr = MSR_P4_BSU_ESCR0 + stag;
- addr <= MSR_P4_BSU_ESCR1; ++i, addr += addr_increment()) {
- if (reserve_evntsel_nmi(addr))
- msrs->controls[i].addr = addr;
- }
- } else {
- for (addr = MSR_P4_IQ_ESCR0 + stag;
- addr <= MSR_P4_IQ_ESCR1; ++i, addr += addr_increment()) {
- if (reserve_evntsel_nmi(addr))
- msrs->controls[i].addr = addr;
- }
- }
-
- for (addr = MSR_P4_RAT_ESCR0 + stag;
- addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) {
- if (reserve_evntsel_nmi(addr))
- msrs->controls[i].addr = addr;
- }
-
- for (addr = MSR_P4_MS_ESCR0 + stag;
- addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
- if (reserve_evntsel_nmi(addr))
- msrs->controls[i].addr = addr;
- }
-
- for (addr = MSR_P4_IX_ESCR0 + stag;
- addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
- if (reserve_evntsel_nmi(addr))
- msrs->controls[i].addr = addr;
- }
-
- /* there are 2 remaining non-contiguously located ESCRs */
-
- if (num_counters == NUM_COUNTERS_NON_HT) {
- /* standard non-HT CPUs handle both remaining ESCRs*/
- if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5))
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
- if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4))
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
-
- } else if (stag == 0) {
- /* HT CPUs give the first remainder to the even thread, as
- the 32nd control register */
- if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4))
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
-
- } else {
- /* and two copies of the second to the odd thread,
- for the 22st and 23nd control registers */
- if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5)) {
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
- }
- }
-
- for (i = 0; i < num_counters; ++i) {
- if (!counter_config[i].enabled)
- continue;
- if (msrs->controls[i].addr)
- continue;
- op_x86_warn_reserved(i);
- p4_shutdown(msrs);
- return -EBUSY;
- }
-
- return 0;
-}
-
-
-static void pmc_setup_one_p4_counter(unsigned int ctr)
-{
- int i;
- int const maxbind = 2;
- unsigned int cccr = 0;
- unsigned int escr = 0;
- unsigned int high = 0;
- unsigned int counter_bit;
- struct p4_event_binding *ev = NULL;
- unsigned int stag;
-
- stag = get_stagger();
-
- /* convert from counter *number* to counter *bit* */
- counter_bit = 1 << VIRT_CTR(stag, ctr);
-
- /* find our event binding structure. */
- if (counter_config[ctr].event <= 0 || counter_config[ctr].event > NUM_EVENTS) {
- printk(KERN_ERR
- "oprofile: P4 event code 0x%lx out of range\n",
- counter_config[ctr].event);
- return;
- }
-
- ev = &(p4_events[counter_config[ctr].event - 1]);
-
- for (i = 0; i < maxbind; i++) {
- if (ev->bindings[i].virt_counter & counter_bit) {
-
- /* modify ESCR */
- rdmsr(ev->bindings[i].escr_address, escr, high);
- ESCR_CLEAR(escr);
- if (stag == 0) {
- ESCR_SET_USR_0(escr, counter_config[ctr].user);
- ESCR_SET_OS_0(escr, counter_config[ctr].kernel);
- } else {
- ESCR_SET_USR_1(escr, counter_config[ctr].user);
- ESCR_SET_OS_1(escr, counter_config[ctr].kernel);
- }
- ESCR_SET_EVENT_SELECT(escr, ev->event_select);
- ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
- wrmsr(ev->bindings[i].escr_address, escr, high);
-
- /* modify CCCR */
- rdmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
- cccr, high);
- CCCR_CLEAR(cccr);
- CCCR_SET_REQUIRED_BITS(cccr);
- CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
- if (stag == 0)
- CCCR_SET_PMI_OVF_0(cccr);
- else
- CCCR_SET_PMI_OVF_1(cccr);
- wrmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
- cccr, high);
- return;
- }
- }
-
- printk(KERN_ERR
- "oprofile: P4 event code 0x%lx no binding, stag %d ctr %d\n",
- counter_config[ctr].event, stag, ctr);
-}
-
-
-static void p4_setup_ctrs(struct op_x86_model_spec const *model,
- struct op_msrs const * const msrs)
-{
- unsigned int i;
- unsigned int low, high;
- unsigned int stag;
-
- stag = get_stagger();
-
- rdmsr(MSR_IA32_MISC_ENABLE, low, high);
- if (!MISC_PMC_ENABLED_P(low)) {
- printk(KERN_ERR "oprofile: P4 PMC not available\n");
- return;
- }
-
- /* clear the cccrs we will use */
- for (i = 0; i < num_counters; i++) {
- if (unlikely(!msrs->controls[i].addr))
- continue;
- rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
- CCCR_CLEAR(low);
- CCCR_SET_REQUIRED_BITS(low);
- wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
- }
-
- /* clear all escrs (including those outside our concern) */
- for (i = num_counters; i < num_controls; i++) {
- if (unlikely(!msrs->controls[i].addr))
- continue;
- wrmsr(msrs->controls[i].addr, 0, 0);
- }
-
- /* setup all counters */
- for (i = 0; i < num_counters; ++i) {
- if (counter_config[i].enabled && msrs->controls[i].addr) {
- reset_value[i] = counter_config[i].count;
- pmc_setup_one_p4_counter(i);
- wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
- -(u64)counter_config[i].count);
- } else {
- reset_value[i] = 0;
- }
- }
-}
-
-
-static int p4_check_ctrs(struct pt_regs * const regs,
- struct op_msrs const * const msrs)
-{
- unsigned long ctr, low, high, stag, real;
- int i;
-
- stag = get_stagger();
-
- for (i = 0; i < num_counters; ++i) {
-
- if (!reset_value[i])
- continue;
-
- /*
- * there is some eccentricity in the hardware which
- * requires that we perform 2 extra corrections:
- *
- * - check both the CCCR:OVF flag for overflow and the
- * counter high bit for un-flagged overflows.
- *
- * - write the counter back twice to ensure it gets
- * updated properly.
- *
- * the former seems to be related to extra NMIs happening
- * during the current NMI; the latter is reported as errata
- * N15 in intel doc 249199-029, pentium 4 specification
- * update, though their suggested work-around does not
- * appear to solve the problem.
- */
-
- real = VIRT_CTR(stag, i);
-
- rdmsr(p4_counters[real].cccr_address, low, high);
- rdmsr(p4_counters[real].counter_address, ctr, high);
- if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
- oprofile_add_sample(regs, i);
- wrmsrl(p4_counters[real].counter_address,
- -(u64)reset_value[i]);
- CCCR_CLEAR_OVF(low);
- wrmsr(p4_counters[real].cccr_address, low, high);
- wrmsrl(p4_counters[real].counter_address,
- -(u64)reset_value[i]);
- }
- }
-
- /* P4 quirk: you have to re-unmask the apic vector */
- apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
-
- /* See op_model_ppro.c */
- return 1;
-}
-
-
-static void p4_start(struct op_msrs const * const msrs)
-{
- unsigned int low, high, stag;
- int i;
-
- stag = get_stagger();
-
- for (i = 0; i < num_counters; ++i) {
- if (!reset_value[i])
- continue;
- rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
- CCCR_SET_ENABLE(low);
- wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
- }
-}
-
-
-static void p4_stop(struct op_msrs const * const msrs)
-{
- unsigned int low, high, stag;
- int i;
-
- stag = get_stagger();
-
- for (i = 0; i < num_counters; ++i) {
- if (!reset_value[i])
- continue;
- rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
- CCCR_SET_DISABLE(low);
- wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
- }
-}
-
-#ifdef CONFIG_SMP
-struct op_x86_model_spec op_p4_ht2_spec = {
- .num_counters = NUM_COUNTERS_HT2,
- .num_controls = NUM_CONTROLS_HT2,
- .fill_in_addresses = &p4_fill_in_addresses,
- .setup_ctrs = &p4_setup_ctrs,
- .check_ctrs = &p4_check_ctrs,
- .start = &p4_start,
- .stop = &p4_stop,
- .shutdown = &p4_shutdown
-};
-#endif
-
-struct op_x86_model_spec op_p4_spec = {
- .num_counters = NUM_COUNTERS_NON_HT,
- .num_controls = NUM_CONTROLS_NON_HT,
- .fill_in_addresses = &p4_fill_in_addresses,
- .setup_ctrs = &p4_setup_ctrs,
- .check_ctrs = &p4_check_ctrs,
- .start = &p4_start,
- .stop = &p4_stop,
- .shutdown = &p4_shutdown
-};
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
deleted file mode 100644
index 7913b6921959..000000000000
--- a/arch/x86/oprofile/op_model_ppro.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * @file op_model_ppro.h
- * Family 6 perfmon and architectural perfmon MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Copyright 2008 Intel Corporation
- * @remark Read the file COPYING
- *
- * @author John Levon
- * @author Philippe Elie
- * @author Graydon Hoare
- * @author Andi Kleen
- * @author Robert Richter <robert.richter@....com>
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <asm/ptrace.h>
-#include <asm/msr.h>
-#include <asm/apic.h>
-#include <asm/nmi.h>
-
-#include "op_x86_model.h"
-#include "op_counter.h"
-
-static int num_counters = 2;
-static int counter_width = 32;
-
-#define MSR_PPRO_EVENTSEL_RESERVED ((0xFFFFFFFFULL<<32)|(1ULL<<21))
-
-static u64 reset_value[OP_MAX_COUNTER];
-
-static void ppro_shutdown(struct op_msrs const * const msrs)
-{
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (!msrs->counters[i].addr)
- continue;
- release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
- release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
- }
-}
-
-static int ppro_fill_in_addresses(struct op_msrs * const msrs)
-{
- int i;
-
- for (i = 0; i < num_counters; i++) {
- if (!reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
- goto fail;
- if (!reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) {
- release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
- goto fail;
- }
- /* both registers must be reserved */
- msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
- msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
- continue;
- fail:
- if (!counter_config[i].enabled)
- continue;
- op_x86_warn_reserved(i);
- ppro_shutdown(msrs);
- return -EBUSY;
- }
-
- return 0;
-}
-
-
-static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
- struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- if (boot_cpu_has(X86_FEATURE_ARCH_PERFMON)) {
- union cpuid10_eax eax;
- eax.full = cpuid_eax(0xa);
-
- /*
- * For Core2 (family 6, model 15), don't reset the
- * counter width:
- */
- if (!(eax.split.version_id == 0 &&
- __this_cpu_read(cpu_info.x86) == 6 &&
- __this_cpu_read(cpu_info.x86_model) == 15)) {
-
- if (counter_width < eax.split.bit_width)
- counter_width = eax.split.bit_width;
- }
- }
-
- /* clear all counters */
- for (i = 0; i < num_counters; ++i) {
- if (!msrs->controls[i].addr)
- continue;
- rdmsrl(msrs->controls[i].addr, val);
- if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
- op_x86_warn_in_use(i);
- val &= model->reserved;
- wrmsrl(msrs->controls[i].addr, val);
- /*
- * avoid a false detection of ctr overflows in NMI *
- * handler
- */
- wrmsrl(msrs->counters[i].addr, -1LL);
- }
-
- /* enable active counters */
- for (i = 0; i < num_counters; ++i) {
- if (counter_config[i].enabled && msrs->counters[i].addr) {
- reset_value[i] = counter_config[i].count;
- wrmsrl(msrs->counters[i].addr, -reset_value[i]);
- rdmsrl(msrs->controls[i].addr, val);
- val &= model->reserved;
- val |= op_x86_get_ctrl(model, &counter_config[i]);
- wrmsrl(msrs->controls[i].addr, val);
- } else {
- reset_value[i] = 0;
- }
- }
-}
-
-
-static int ppro_check_ctrs(struct pt_regs * const regs,
- struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (!reset_value[i])
- continue;
- rdmsrl(msrs->counters[i].addr, val);
- if (val & (1ULL << (counter_width - 1)))
- continue;
- oprofile_add_sample(regs, i);
- wrmsrl(msrs->counters[i].addr, -reset_value[i]);
- }
-
- /* Only P6 based Pentium M need to re-unmask the apic vector but it
- * doesn't hurt other P6 variant */
- apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
-
- /* We can't work out if we really handled an interrupt. We
- * might have caught a *second* counter just after overflowing
- * the interrupt for this counter then arrives
- * and we don't find a counter that's overflowed, so we
- * would return 0 and get dazed + confused. Instead we always
- * assume we found an overflow. This sucks.
- */
- return 1;
-}
-
-
-static void ppro_start(struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (reset_value[i]) {
- rdmsrl(msrs->controls[i].addr, val);
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
- wrmsrl(msrs->controls[i].addr, val);
- }
- }
-}
-
-
-static void ppro_stop(struct op_msrs const * const msrs)
-{
- u64 val;
- int i;
-
- for (i = 0; i < num_counters; ++i) {
- if (!reset_value[i])
- continue;
- rdmsrl(msrs->controls[i].addr, val);
- val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
- wrmsrl(msrs->controls[i].addr, val);
- }
-}
-
-struct op_x86_model_spec op_ppro_spec = {
- .num_counters = 2,
- .num_controls = 2,
- .reserved = MSR_PPRO_EVENTSEL_RESERVED,
- .fill_in_addresses = &ppro_fill_in_addresses,
- .setup_ctrs = &ppro_setup_ctrs,
- .check_ctrs = &ppro_check_ctrs,
- .start = &ppro_start,
- .stop = &ppro_stop,
- .shutdown = &ppro_shutdown
-};
-
-/*
- * Architectural performance monitoring.
- *
- * Newer Intel CPUs (Core1+) have support for architectural
- * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
- * The advantage of this is that it can be done without knowing about
- * the specific CPU.
- */
-
-static void arch_perfmon_setup_counters(void)
-{
- union cpuid10_eax eax;
-
- eax.full = cpuid_eax(0xa);
-
- /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
- if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 &&
- boot_cpu_data.x86_model == 15) {
- eax.split.version_id = 2;
- eax.split.num_counters = 2;
- eax.split.bit_width = 40;
- }
-
- num_counters = min((int)eax.split.num_counters, OP_MAX_COUNTER);
-
- op_arch_perfmon_spec.num_counters = num_counters;
- op_arch_perfmon_spec.num_controls = num_counters;
-}
-
-static int arch_perfmon_init(struct oprofile_operations *ignore)
-{
- arch_perfmon_setup_counters();
- return 0;
-}
-
-struct op_x86_model_spec op_arch_perfmon_spec = {
- .reserved = MSR_PPRO_EVENTSEL_RESERVED,
- .init = &arch_perfmon_init,
- /* num_counters/num_controls filled in at runtime */
- .fill_in_addresses = &ppro_fill_in_addresses,
- /* user space does the cpuid check for available events */
- .setup_ctrs = &ppro_setup_ctrs,
- .check_ctrs = &ppro_check_ctrs,
- .start = &ppro_start,
- .stop = &ppro_stop,
- .shutdown = &ppro_shutdown
-};
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
deleted file mode 100644
index 276cf79b5d24..000000000000
--- a/arch/x86/oprofile/op_x86_model.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/**
- * @file op_x86_model.h
- * interface to x86 model-specific MSR operations
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Graydon Hoare
- * @author Robert Richter <robert.richter@....com>
- */
-
-#ifndef OP_X86_MODEL_H
-#define OP_X86_MODEL_H
-
-#include <asm/types.h>
-#include <asm/perf_event.h>
-
-struct op_msr {
- unsigned long addr;
- u64 saved;
-};
-
-struct op_msrs {
- struct op_msr *counters;
- struct op_msr *controls;
- struct op_msr *multiplex;
-};
-
-struct pt_regs;
-
-struct oprofile_operations;
-
-/* The model vtable abstracts the differences between
- * various x86 CPU models' perfctr support.
- */
-struct op_x86_model_spec {
- unsigned int num_counters;
- unsigned int num_controls;
- unsigned int num_virt_counters;
- u64 reserved;
- u16 event_mask;
- int (*init)(struct oprofile_operations *ops);
- int (*fill_in_addresses)(struct op_msrs * const msrs);
- void (*setup_ctrs)(struct op_x86_model_spec const *model,
- struct op_msrs const * const msrs);
- int (*check_ctrs)(struct pt_regs * const regs,
- struct op_msrs const * const msrs);
- void (*start)(struct op_msrs const * const msrs);
- void (*stop)(struct op_msrs const * const msrs);
- void (*shutdown)(struct op_msrs const * const msrs);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
- void (*switch_ctrl)(struct op_x86_model_spec const *model,
- struct op_msrs const * const msrs);
-#endif
-};
-
-struct op_counter_config;
-
-static inline void op_x86_warn_in_use(int counter)
-{
- /*
- * The warning indicates an already running counter. If
- * oprofile doesn't collect data, then try using a different
- * performance counter on your platform to monitor the desired
- * event. Delete counter #%d from the desired event by editing
- * the /usr/share/oprofile/%s/<cpu>/events file. If the event
- * cannot be monitored by any other counter, contact your
- * hardware or BIOS vendor.
- */
- pr_warn("oprofile: counter #%d on cpu #%d may already be used\n",
- counter, smp_processor_id());
-}
-
-static inline void op_x86_warn_reserved(int counter)
-{
- pr_warn("oprofile: counter #%d is already reserved\n", counter);
-}
-
-extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
- struct op_counter_config *counter_config);
-extern int op_x86_phys_to_virt(int phys);
-extern int op_x86_virt_to_phys(int virt);
-
-extern struct op_x86_model_spec op_ppro_spec;
-extern struct op_x86_model_spec op_p4_spec;
-extern struct op_x86_model_spec op_p4_ht2_spec;
-extern struct op_x86_model_spec op_amd_spec;
-extern struct op_x86_model_spec op_arch_perfmon_spec;
-
-#endif /* OP_X86_MODEL_H */
--
2.25.0.rc1.19.g042ed3e048af
Powered by blists - more mailing lists