| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <17939709-f6f4-fa9c-836f-9779081c4087@nvidia.com>
Date: Thu, 14 Jan 2021 16:11:01 +0000
From: Jon Hunter <jonathanh@...dia.com>
To: Saravana Kannan <saravanak@...gle.com>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Android Kernel Team <kernel-team@...roid.com>,
LKML <linux-kernel@...r.kernel.org>,
Jisheng Zhang <Jisheng.Zhang@...aptics.com>,
Kevin Hilman <khilman@...libre.com>,
John Stultz <john.stultz@...aro.org>,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Marc Zyngier <maz@...nel.org>,
linux-tegra <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH v1 0/5] Enable fw_devlink=on by default
On 13/01/2021 21:26, Saravana Kannan wrote:
> On Wed, Jan 13, 2021 at 3:30 AM Jon Hunter <jonathanh@...dia.com> wrote:
>>
>>
>> On 18/12/2020 03:16, Saravana Kannan wrote:
>>> As discussed in LPC 2020, cyclic dependencies in firmware that couldn't
>>> be broken using logic was one of the last remaining reasons
>>> fw_devlink=on couldn't be set by default.
>>>
>>> This series changes fw_devlink so that when a cyclic dependency is found
>>> in firmware, the links between those devices fallback to permissive mode
>>> behavior. This way, the rest of the system still benefits from
>>> fw_devlink, but the ambiguous cases fallback to permissive mode.
>>>
>>> Setting fw_devlink=on by default brings a bunch of benefits (currently,
>>> only for systems with device tree firmware):
>>> * Significantly cuts down deferred probes.
>>> * Device probe is effectively attempted in graph order.
>>> * Makes it much easier to load drivers as modules without having to
>>> worry about functional dependencies between modules (depmod is still
>>> needed for symbol dependencies).
>>
>>
>> One issue we have come across with this is the of_mdio.c driver. On
>> Tegra194 Jetson Xavier I am seeing the following ...
>>
>> boot: logs: [ 4.194791] WARNING KERN WARNING: CPU: 0 PID: 1 at /dvs/git/dirty/git-master_l4t-upstream/kernel/drivers/base/core.c:1189 device_links_driver_bound+0x240/0x260
>> boot: logs: [ 4.207683] WARNING KERN Modules linked in:
>> boot: logs: [ 4.210691] WARNING KERN CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc3-next-20210112-gdf869cab4b35 #1
>> boot: logs: [ 4.219221] WARNING KERN Hardware name: NVIDIA Jetson AGX Xavier Developer Kit (DT)
>> boot: logs: [ 4.225628] WARNING KERN pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
>> boot: logs: [ 4.231542] WARNING KERN pc : device_links_driver_bound+0x240/0x260
>> boot: logs: [ 4.236587] WARNING KERN lr : device_links_driver_bound+0xf8/0x260
>> boot: logs: [ 4.241560] WARNING KERN sp : ffff800011f4b980
>> boot: logs: [ 4.244819] WARNING KERN x29: ffff800011f4b980 x28: ffff00008208a0a0
>> boot: logs: [ 4.250051] WARNING KERN x27: ffff00008208a080 x26: 00000000ffffffff
>> boot: logs: [ 4.255271] WARNING KERN x25: 0000000000000003 x24: ffff800011b99000
>> boot: logs: [ 4.260489] WARNING KERN x23: 0000000000000001 x22: ffff800011df14f0
>> boot: logs: [ 4.265706] WARNING KERN x21: ffff800011f4b9f8 x20: ffff800011df1000
>> boot: logs: [ 4.270934] WARNING KERN x19: ffff00008208a000 x18: 0000000000000005
>> boot: logs: [ 4.276166] WARNING KERN x17: 0000000000000007 x16: 0000000000000001
>> boot: logs: [ 4.281382] WARNING KERN x15: ffff000080030c90 x14: ffff0000805c9df8
>> boot: logs: [ 4.286618] WARNING KERN x13: 0000000000000000 x12: ffff000080030c90
>> boot: logs: [ 4.291847] WARNING KERN x11: ffff0000805c9da8 x10: 0000000000000040
>> boot: logs: [ 4.297061] WARNING KERN x9 : ffff000080030c98 x8 : 0000000000000000
>> boot: logs: [ 4.302291] WARNING KERN x7 : 0000000000000009 x6 : 0000000000000000
>> boot: logs: [ 4.307509] WARNING KERN x5 : ffff000080100000 x4 : 0000000000000000
>> boot: logs: [ 4.312739] WARNING KERN x3 : ffff800011df1e38 x2 : ffff000080908c10
>> boot: logs: [ 4.317956] WARNING KERN x1 : 0000000000000001 x0 : ffff0000809ca400
>> boot: logs: [ 4.323183] WARNING KERN Call trace:
>> boot: logs: [ 4.325593] WARNING KERN device_links_driver_bound+0x240/0x260
>> boot: logs: [ 4.330301] WARNING KERN driver_bound+0x70/0xd0
>> boot: logs: [ 4.333740] WARNING KERN device_bind_driver+0x50/0x60
>> boot: logs: [ 4.337671] WARNING KERN phy_attach_direct+0x258/0x2e0
>> boot: logs: [ 4.341718] WARNING KERN phylink_of_phy_connect+0x7c/0x140
>> boot: logs: [ 4.346081] WARNING KERN stmmac_open+0xb04/0xc70
>> boot: logs: [ 4.349612] WARNING KERN __dev_open+0xe0/0x190
>> boot: logs: [ 4.352972] WARNING KERN __dev_change_flags+0x16c/0x1b8
>> boot: logs: [ 4.357081] WARNING KERN dev_change_flags+0x20/0x60
>> boot: logs: [ 4.360856] WARNING KERN ip_auto_config+0x2a0/0xfe8
>> boot: logs: [ 4.364633] WARNING KERN do_one_initcall+0x58/0x1b8
>> boot: logs: [ 4.368405] WARNING KERN kernel_init_freeable+0x1ec/0x240
>> boot: logs: [ 4.372698] WARNING KERN kernel_init+0x10/0x110
>> boot: logs: [ 4.376130] WARNING KERN ret_from_fork+0x10/0x18
>>
>>
>> So looking at this change does this mean that the of_mdio needs to be
>> converted to a proper driver?
>
> Sorry, there's not enough context in this log for me to tell how this
> is even related to of_mdio.c. My guess is this is related to network
> stack directly calling device_bind_driver() and not updating device
> link state correctly. See what device_links_check_suppliers() does in
> the normal path. I think I know which warning this is, but can you
> check your tree and tell me the code you see in
> drivers/base/core.c:1189 ?
Yes this is the warning shown here [0] and this is coming from
the 'Generic PHY stmmac-0:00' device.
> Also, can you give me a few more lines above and below this log and
> also explain why you think this is related to of_mdio.c? Where is the
> DT file for this board in case I need to look at it? And where is this
> phy node defined in DT?
[ 4.179760] dwc-eth-dwmac 2490000.ethernet: User ID: 0x10, Synopsys ID: 0x50
[ 4.186743] dwc-eth-dwmac 2490000.ethernet: DWMAC4/5
[ 4.191755] dwc-eth-dwmac 2490000.ethernet: DMA HW capability register supported
[ 4.199062] dwc-eth-dwmac 2490000.ethernet: RX Checksum Offload Engine supported
[ 4.206379] dwc-eth-dwmac 2490000.ethernet: TX Checksum insertion supported
[ 4.213247] dwc-eth-dwmac 2490000.ethernet: Wake-Up On Lan supported
[ 4.219617] dwc-eth-dwmac 2490000.ethernet: TSO supported
[ 4.224954] dwc-eth-dwmac 2490000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 4.232800] dwc-eth-dwmac 2490000.ethernet: device MAC address 4a:48:a7:a2:2e:d6
[ 4.240115] dwc-eth-dwmac 2490000.ethernet: Enabled Flow TC (entries=8)
[ 4.246638] dwc-eth-dwmac 2490000.ethernet: TSO feature enabled
[ 4.252499] dwc-eth-dwmac 2490000.ethernet: SPH feature enabled
[ 4.258383] dwc-eth-dwmac 2490000.ethernet: Using 40 bits DMA width
[ 4.265058] libphy: stmmac: probed
[ 4.269421] irq: IRQ63: trimming hierarchy from :bus@0:pmc@...0000
[ 4.276957] platform 3610000.usb: probe deferral - supplier 3520000.padctl not ready
[ 4.286759] platform 31c0000.i2c: probe deferral - wait for supplier dpaux@...e0000
[ 4.295970] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1305000 KHz, changing to: 1344000 KHz
[ 4.308146] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 1306000 KHz, changing to: 1344000 KHz
[ 4.320108] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1305000 KHz, changing to: 1344000 KHz
[ 4.332191] cpufreq: cpufreq_online: CPU6: Running at unlisted initial frequency: 1305000 KHz, changing to: 1344000 KHz
[ 4.349276] sdhci-tegra 3400000.mmc: Got CD GPIO
[ 4.360405] mmc0: CQHCI version 5.10
[ 4.363006] tegra-xusb 3610000.usb: Firmware timestamp: 2019-07-24 05:47:34 UTC
[ 4.371278] tegra-xusb 3610000.usb: xHCI Host Controller
[ 4.371298] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1
[ 4.371958] tegra-xusb 3610000.usb: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000010810
[ 4.372001] tegra-xusb 3610000.usb: irq 29, io mem 0x03610000
[ 4.372522] hub 1-0:1.0: USB hub found
[ 4.372546] hub 1-0:1.0: 4 ports detected
[ 4.372887] tegra-xusb 3610000.usb: xHCI Host Controller
[ 4.372894] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2
[ 4.372900] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed
[ 4.373227] hub 2-0:1.0: USB hub found
[ 4.373251] hub 2-0:1.0: 4 ports detected
[ 4.376437] platform 31c0000.i2c: probe deferral - wait for supplier dpaux@...e0000
[ 4.447782] platform 31c0000.i2c: probe deferral - wait for supplier dpaux@...e0000
[ 4.457409] irq: IRQ64: trimming hierarchy from :bus@0:pmc@...0000
[ 4.463735] irq: IRQ65: trimming hierarchy from :bus@0:interrupt-controller@...1000
[ 4.471401] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 4.476701] mmc0: SDHCI controller on 3460000.mmc [3460000.mmc] using ADMA 64-bit
[ 4.485440] irq: IRQ66: trimming hierarchy from :bus@0:pmc@...0000
[ 4.486043] platform 31c0000.i2c: probe deferral - wait for supplier dpaux@...e0000
[ 4.492120] mmc1: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit
[ 4.507063] platform 31c0000.i2c: probe deferral - wait for supplier dpaux@...e0000
[ 4.514674] ------------[ cut here ]------------
[ 4.524876] WARNING: CPU: 3 PID: 1 at /local/workdir/tegra/mlt-linux_next/kernel/drivers/base/core.c:1188 device_links_driver_bound+0x29c/0x2d8
[ 4.537563] Modules linked in:
[ 4.540602] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc3-next-20210113-dirty #1
[ 4.548545] Hardware name: NVIDIA Jetson AGX Xavier Developer Kit (DT)
[ 4.555019] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 4.560938] pc : device_links_driver_bound+0x29c/0x2d8
[ 4.566050] lr : device_links_driver_bound+0x29c/0x2d8
[ 4.571171] sp : ffff800011f4b980
[ 4.574467] x29: ffff800011f4b980 x28: ffff00008208a080
[ 4.579732] x27: ffff00008208a0a0 x26: ffff000080908c10
[ 4.585036] x25: ffff800011e4af73 x24: ffff800011b99000
[ 4.590347] x23: ffff800011df1428 x22: ffff800011f4b9f8
[ 4.595634] x21: ffff800011df1000 x20: ffff00008208a000
[ 4.600916] x19: ffff0000809ca400 x18: ffffffffffffffff
[ 4.606236] x17: 0000000000000007 x16: 0000000000000001
[ 4.611479] x15: 0000000000000613 x14: ffff800011f4b610
[ 4.616780] x13: 00000000ffffffea x12: ffff800011c0a320
[ 4.622027] x11: 0000000000000001 x10: 0000000000000001
[ 4.627304] x9 : 0000000000000003 x8 : ffff800011bb2378
[ 4.632589] x7 : ffff800011c0a378 x6 : c0000000ffffefff
[ 4.637831] x5 : 0000000000017fe8 x4 : 0000000000000000
[ 4.643124] x3 : 00000000ffffffff x2 : ffff800011bb22e8
[ 4.645339] mmc0: Command Queue Engine enabled
[ 4.648397] x1 : a13f0a1c9773d600 x0 : 0000000000000000
[ 4.648414] Call trace:
[ 4.648424] device_links_driver_bound+0x29c/0x2d8
[ 4.648446] driver_bound+0x6c/0xf8
[ 4.648455] device_bind_driver+0x50/0x60
[ 4.648462] phy_attach_direct+0x258/0x2e0
[ 4.648473] phylink_of_phy_connect+0x7c/0x140
[ 4.652967] mmc0: new HS200 MMC card at address 0001
[ 4.658075] stmmac_open+0xb04/0xc70
[ 4.658093] __dev_open+0xe0/0x190
[ 4.658142] __dev_change_flags+0x16c/0x1b8
[ 4.665285] dev_change_flags+0x20/0x60
[ 4.665326] ip_auto_config+0x2a0/0xfe8
[ 4.665340] do_one_initcall+0x58/0x1b8
[ 4.672731] kernel_init_freeable+0x1ec/0x240
[ 4.672746] kernel_init+0x10/0x110
[ 4.716301] ret_from_fork+0x10/0x18
[ 4.719865] ---[ end trace 819cead1701ad8da ]---
[ 4.724955] platform 31c0000.i2c: probe deferral - wait for supplier dpaux@...e0000
[ 4.725143] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
[ 4.725260] dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL)
[ 4.726387] dwmac4: Master AXI performs any burst length
[ 4.726410] dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
[ 4.726840] dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 4.727011] dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
[ 4.737024] dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
The warning is occurring when device_bind_driver() is called in
phy_attach_direct() [1]. The device-tree ethernet node for this
board can be found here [2].
> If there's an easy way to convert it to a proper driver, that's always
> better than calling into driver core in a piecemeal fashion.
So this is a generic phy driver that has been around for quite some
time AFAICT.
>> I would have thought that this will be
>> seen on several platforms.
>
> I'm surprised you are seeing this issue only now. I'd have expected it
> to have happened even without this series.
We have automated testing that checks for new warnings with -next and
this is definitely new and the bisect points to this change.
Cheers
Jon
[0] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/base/core.c?h=next-20210112#n1189
[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/net/phy/phy_device.c?h=next-20210112#n1357
[2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi?h=next-20210112#n31
--
nvpublic
Powered by blists - more mailing lists