lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210115200141.1397785-7-paul.kocialkowski@bootlin.com>
Date:   Fri, 15 Jan 2021 21:01:31 +0100
From:   Paul Kocialkowski <paul.kocialkowski@...tlin.com>
To:     linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, devel@...verdev.osuosl.org,
        linux-sunxi@...glegroups.com
Cc:     Yong Deng <yong.deng@...ewell.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
        Jonathan Corbet <corbet@....net>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>,
        Helen Koike <helen.koike@...labora.com>,
        Dafna Hirschfeld <dafna.hirschfeld@...labora.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Hans Verkuil <hans.verkuil@...co.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        kevin.lhopital@...mail.com,
        Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
        Kévin L'hôpital 
        <kevin.lhopital@...tlin.com>
Subject: [PATCH v5 06/16] media: sun6i-csi: Only configure the interface data width for parallel

Bits related to the interface data width are only applicable to the
parallel interface and are irrelevant when the CSI controller is taking
input from the MIPI CSI-2 controller.

In prevision of adding support for this case, set these bits
conditionally so there is no ambiguity. The conditional block is
moved around before the interlaced conditional block for nicer code
symmetry (conditional blocks first) while at it.

Co-developed-by: Kévin L'hôpital <kevin.lhopital@...tlin.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@...tlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Acked-by: Maxime Ripard <mripard@...nel.org>
---
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 42 +++++++++++--------
 1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 1a11a6174a17..d06028f42534 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -378,8 +378,13 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
 	unsigned char bus_width;
 	u32 flags;
 	u32 cfg;
+	bool input_parallel = false;
 	bool input_interlaced = false;
 
+	if (endpoint->bus_type == V4L2_MBUS_PARALLEL ||
+	    endpoint->bus_type == V4L2_MBUS_BT656)
+		input_parallel = true;
+
 	if (csi->config.field == V4L2_FIELD_INTERLACED
 	    || csi->config.field == V4L2_FIELD_INTERLACED_TB
 	    || csi->config.field == V4L2_FIELD_INTERLACED_BT)
@@ -395,6 +400,26 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
 		 CSI_IF_CFG_HREF_POL_MASK | CSI_IF_CFG_FIELD_MASK |
 		 CSI_IF_CFG_SRC_TYPE_MASK);
 
+	if (input_parallel) {
+		switch (bus_width) {
+		case 8:
+			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
+			break;
+		case 10:
+			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
+			break;
+		case 12:
+			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
+			break;
+		case 16: /* No need to configure DATA_WIDTH for 16bit */
+			break;
+		default:
+			dev_warn(sdev->dev, "Unsupported bus width: %u\n",
+				 bus_width);
+			break;
+		}
+	}
+
 	if (input_interlaced)
 		cfg |= CSI_IF_CFG_SRC_TYPE_INTERLACED;
 	else
@@ -440,23 +465,6 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
 		break;
 	}
 
-	switch (bus_width) {
-	case 8:
-		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
-		break;
-	case 10:
-		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
-		break;
-	case 12:
-		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
-		break;
-	case 16: /* No need to configure DATA_WIDTH for 16bit */
-		break;
-	default:
-		dev_warn(sdev->dev, "Unsupported bus width: %u\n", bus_width);
-		break;
-	}
-
 	regmap_write(sdev->regmap, CSI_IF_CFG_REG, cfg);
 }
 
-- 
2.30.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ