[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YAEpkHSuf+Uv2kv+@builder.lan>
Date: Thu, 14 Jan 2021 23:35:12 -0600
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>
Cc: linux-arm-msm@...r.kernel.org, agross@...nel.org,
lgirdwood@...il.com, broonie@...nel.org, robh+dt@...nel.org,
sumit.semwal@...aro.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, phone-devel@...r.kernel.org,
konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
martin.botka@...ainline.org
Subject: Re: [PATCH v2 6/7] dt-bindings: regulator: qcom-labibb: Document
SCP/OCP interrupts
On Wed 13 Jan 13:42 CST 2021, AngeloGioacchino Del Regno wrote:
> Short-Circuit Protection (SCP) and Over-Current Protection (OCP) are
> now implemented in the driver: document the interrupts.
> This also fixes wrong documentation about the SCP interrupt for LAB.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>
> ---
> .../regulator/qcom-labibb-regulator.yaml | 20 +++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> index 7a507692f1ba..cf784bd1f5e5 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> @@ -29,9 +29,10 @@ properties:
> default: 200
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> description:
> - Short-circuit interrupt for lab.
> + Short-circuit and over-current interrupts for lab.
>
> required:
> - interrupts
> @@ -47,9 +48,10 @@ properties:
> default: 300
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> description:
> - Short-circuit interrupt for lab.
> + Short-circuit and over-current interrupts for ibb.
>
> required:
> - interrupts
> @@ -67,13 +69,15 @@ examples:
> compatible = "qcom,pmi8998-lab-ibb";
>
> lab {
> - interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "sc-err";
> + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
> + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "sc-err", "ocp";
> };
>
> ibb {
> - interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "sc-err";
> + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
> + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "sc-err", "ocp";
> };
> };
>
> --
> 2.29.2
>
Powered by blists - more mailing lists