linux-kernel - Re: [PATCH 2/2] arm64: dts: freescale: sl28: add variant 1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210115093412.GK28365@dragon>
Date:   Fri, 15 Jan 2021 17:34:13 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Michael Walle <michael@...le.cc>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Rob Herring <robh+dt@...nel.org>, Li Yang <leoyang.li@....com>
Subject: Re: [PATCH 2/2] arm64: dts: freescale: sl28: add variant 1

On Mon, Jan 11, 2021 at 09:00:37AM +0100, Michael Walle wrote:
> Am 2021-01-11 02:34, schrieb Shawn Guo:
> > On Tue, Dec 29, 2020 at 01:03:21PM +0100, Michael Walle wrote:
> > > There is a new variant 1 of this board available. It features up to
> > > four
> > > SerDes lanes for customer use. Add a new device tree which features
> > > just
> > > the basic peripherals. A customer will then have to modify or append
> > > to
> > > this device tree.
> > > 
> > > Signed-off-by: Michael Walle <michael@...le.cc>
> > > ---
> > >  arch/arm64/boot/dts/freescale/Makefile        |  1 +
> > >  .../fsl-ls1028a-kontron-sl28-var1.dts         | 61
> > > +++++++++++++++++++
> > >  2 files changed, 62 insertions(+)
> > >  create mode 100644
> > > arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
> > > 
> > > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > > b/arch/arm64/boot/dts/freescale/Makefile
> > > index 6f0777ee6cd6..79cb0025fcc6 100644
> > > --- a/arch/arm64/boot/dts/freescale/Makefile
> > > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) +=
> > > fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
> > > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) +=
> > > fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> > >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
> > > diff --git
> > > a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
> > > b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
> > > new file mode 100644
> > > index 000000000000..52f2f3ffdce1
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
> > > @@ -0,0 +1,61 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Device Tree file for the Kontron SMARC-sAL28 board.
> > > + *
> > > + * This is for the network variant 1 which has one ethernet port.
> > > It is
> > > + * different than the base variant, which also has one port, but
> > > here the
> > > + * port is connected via RGMII. This port is not TSN aware.
> > > + * None of the  four SerDes lanes are used by the module, instead
> > > they are
> > > + * all led out to the carrier for customer use.
> > > + *
> > > + * Copyright (C) 2020 Michael Walle <michael@...le.cc>
> > > + *
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "fsl-ls1028a-kontron-sl28.dts"
> > > +#include <dt-bindings/net/qca-ar803x.h>
> > > +
> > > +/ {
> > > +	model = "Kontron SMARC-sAL28 (4 Lanes)";
> > > +	compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
> > > +};
> > > +
> > > +&enetc_port0 {
> > > +	status = "disabled";
> > > +	/delete-property/ phy-handle;
> > > +	/delete-node/ mdio;
> > 
> > As it's disabled anyway, why do we bother to delete the property and
> > child node?
> 
> Because beneath that node is also the old phy0 label. So you'd be getting
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts:38.24-55.5:
> ERROR (duplicate_label):
> /soc/pcie@...000000/ethernet@0,1/mdio/ethernet-phy@4: Duplicate label 'phy0'
> on /soc/pcie@...000000/ethernet@0,1/mdio/ethernet-phy@4 and
> /soc/pcie@...000000/ethernet@0,0/mdio/ethernet-phy@5

So labelling enetc_port1 phy as 'phy1' would fix it, right?

Shawn