Message-Id: <0864b9bfa6e2b8b5e7ad9a7a739ca3274f66493c.1610703653.git.mallikarjunax.reddy@linux.intel.com>
Date:   Fri, 15 Jan 2021 17:56:02 +0800
From:   Amireddy Mallikarjuna reddy <mallikarjunax.reddy@...ux.intel.com>
To:     dmaengine@...r.kernel.org, vkoul@...nel.org,
        devicetree@...r.kernel.org, robh+dt@...nel.org
Cc:     linux-kernel@...r.kernel.org, andriy.shevchenko@...el.com,
        chuanhua.lei@...ux.intel.com, cheol.yong.kim@...el.com,
        qi-ming.wu@...el.com, mallikarjunax.reddy@...ux.intel.com,
        malliamireddy009@...il.com, rtanwar@...linear.com,
        lchuanhua@...linear.com
Subject: [PATCH v11 1/2] dt-bindings: dma: Add bindings for Intel LGM SoC

Add DT bindings YAML schema for DMA controller driver
of Lightning Mountain (LGM) SoC.

Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@...ux.intel.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
v1:
- Initial version.

v2:
- Fix bot errors.

v3:
- No change.

v4:
- Address Thomas langer comments
  - use node name pattern as dma-controller as in common binding.
  - Remove "_" (underscore) in instance name.
  - Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes.

v5:
- Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties.

v6:
- Add additionalProperties: false
- completely removed 'dma-ports' and 'dma-channels' child nodes.
- Moved channel dt properties to client side dmas.
- Use standard dma-channels and dma-channel-mask properties.
- Documented reset-names
- Add description for dma-cells

v7:
- modified compatible to oneof
- Reduced number of dma-cells to 3
- Fine tune the description of some properties.

v7-resend:
- rebase to 5.10-rc1
- No change.

v8:
- rebased to 5.10-rc3
- Fixing the bot issues (wrong indentation)

v9:
- Use 'enum' instead of oneOf+const
- Drop '#dma-cells' in required:, already covered in dma-common.yaml
- Drop nodename Already covered by dma-controller.yaml

v10:
- rebased to 5.10-rc6
- Add Reviewed-by: Rob Herring <robh@...nel.org>
- Fixed typo.
- moved property dma-desc-in-sram to driver side.
- Moved property dma-orrc to driver side.

v10-resend:
- rebased to 5.10
- No change

v11:
- Since v10 was sent, there have been some fixes for JSON pointers and tools check now got this is missing a '/'.
  Add missing a '/' in '/schemas/types.yaml#definitions/uint32'
---
 .../devicetree/bindings/dma/intel,ldma.yaml   | 116 ++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml

diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
new file mode 100644
index 000000000000..a5c4be783593
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized DMA controllers.
+
+maintainers:
+  - chuanhua.lei@...el.com
+  - mallikarjunax.reddy@...el.com
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - intel,lgm-cdma
+      - intel,lgm-dma2tx
+      - intel,lgm-dma1rx
+      - intel,lgm-dma1tx
+      - intel,lgm-dma0tx
+      - intel,lgm-dma3
+      - intel,lgm-toe-dma30
+      - intel,lgm-toe-dma31
+
+  reg:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description:
+      The first cell is the peripheral's DMA request line.
+      The second cell is the peripheral's (port) number corresponding to the channel.
+      The third cell is the burst length of the channel.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+  dma-channel-mask:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ctrl
+
+  interrupts:
+    maxItems: 1
+
+  intel,dma-poll-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DMA descriptor polling counter is used to control the poling mechanism
+      for the descriptor fetching for all channels.
+
+  intel,dma-byte-en:
+    type: boolean
+    description:
+      DMA byte enable is only valid for DMA write(RX).
+      Byte enable(1) means DMA write will be based on the number of dwords
+      instead of the whole burst.
+
+  intel,dma-drb:
+    type: boolean
+    description:
+      DMA descriptor read back to make sure data and desc synchronization.
+
+  intel,dma-dburst-wr:
+    type: boolean
+    description:
+      Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
+      if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
+      It only applies to RX DMA and memcopy DMA.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma0: dma-controller@...00000 {
+      compatible = "intel,lgm-cdma";
+      reg = <0xe0e00000 0x1000>;
+      #dma-cells = <3>;
+      dma-channels = <16>;
+      dma-channel-mask = <0xFFFF>;
+      interrupt-parent = <&ioapic1>;
+      interrupts = <82 1>;
+      resets = <&rcu0 0x30 0>;
+      reset-names = "ctrl";
+      clocks = <&cgu0 80>;
+      intel,dma-poll-cnt = <4>;
+      intel,dma-byte-en;
+      intel,dma-drb;
+    };
+  - |
+    dma3: dma-controller@...00000 {
+      compatible = "intel,lgm-dma3";
+      reg = <0xec800000 0x1000>;
+      clocks = <&cgu0 71>;
+      resets = <&rcu0 0x10 9>;
+      #dma-cells = <3>;
+      intel,dma-poll-cnt = <16>;
+      intel,dma-byte-en;
+      intel,dma-dburst-wr;
+    };
-- 
2.17.1

Powered by blists - more mailing lists