[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210115101613.1490837-2-paweldembicki@gmail.com>
Date: Fri, 15 Jan 2021 11:16:13 +0100
From: Pawel Dembicki <paweldembicki@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Yangbo Lu <yangbo.lu@....com>,
Pawel Dembicki <paweldembicki@...il.com>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] arm64: dts: fsl-ls1012a-frdm: add spi-uart device
This patch adds spi-uart controller to LS1012A-FRDM board dts.
Device is equipped in SC16IS740 from NXP.
Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
---
.../boot/dts/freescale/fsl-ls1012a-frdm.dts | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 67702667ed8a..9473d16336a2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include "fsl-ls1012a.dtsi"
/ {
@@ -57,6 +58,26 @@ simple-audio-card,codec {
};
};
+&dspi {
+ status = "okay";
+ bus-num = <0>;
+
+ serial@0 {
+ reg = <0>;
+ compatible = "nxp,sc16is740";
+ spi-max-frequency = <4000000>;
+ clocks = <&sc16is7xx_clk>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ sc16is7xx_clk: sc16is7xx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
&duart0 {
status = "okay";
};
--
2.25.1
Powered by blists - more mailing lists