| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210118163006.61659-4-dgilbert@interlog.com>
Date: Mon, 18 Jan 2021 11:30:05 -0500
From: Douglas Gilbert <dgilbert@...erlog.com>
To: linux-scsi@...r.kernel.org, linux-block@...r.kernel.org,
target-devel@...r.kernel.org, linux-rdma@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: martin.petersen@...cle.com, jejb@...ux.vnet.ibm.com,
bostroesser@...il.com, ddiss@...e.de, bvanassche@....org,
jgg@...pe.ca
Subject: [PATCH v6 3/4] scatterlist: add sgl_compare_sgl() function
After enabling copies between scatter gather lists (sgl_s), another
storage related operation is to compare two sgl_s. This new function
is modelled on NVMe's Compare command and the SCSI VERIFY(BYTCHK=1)
command. Like memcmp() this function returns false on the first
miscompare and stops comparing.
A helper function called sgl_compare_sgl_idx() is added. It takes an
additional parameter (miscompare_idx) which is a pointer. If that
pointer is non-NULL and a miscompare is detected (i.e. the function
returns false) then the byte index of the first miscompare is written
to *miscomapre_idx. Knowing the location of the first miscompare is
needed to implement the SCSI COMPARE AND WRITE command properly.
Reviewed-by: Bodo Stroesser <bostroesser@...il.com>
Signed-off-by: Douglas Gilbert <dgilbert@...erlog.com>
---
include/linux/scatterlist.h | 8 +++
lib/scatterlist.c | 109 ++++++++++++++++++++++++++++++++++++
2 files changed, 117 insertions(+)
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 3f836a3246aa..71be65f9ebb5 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -325,6 +325,14 @@ size_t sgl_copy_sgl(struct scatterlist *d_sgl, unsigned int d_nents, off_t d_ski
struct scatterlist *s_sgl, unsigned int s_nents, off_t s_skip,
size_t n_bytes);
+bool sgl_compare_sgl(struct scatterlist *x_sgl, unsigned int x_nents, off_t x_skip,
+ struct scatterlist *y_sgl, unsigned int y_nents, off_t y_skip,
+ size_t n_bytes);
+
+bool sgl_compare_sgl_idx(struct scatterlist *x_sgl, unsigned int x_nents, off_t x_skip,
+ struct scatterlist *y_sgl, unsigned int y_nents, off_t y_skip,
+ size_t n_bytes, size_t *miscompare_idx);
+
/*
* Maximum number of entries that will be allocated in one piece, if
* a list larger than this is required then chaining will be utilized.
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index c06f8caaff91..e3182de753d0 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -1131,3 +1131,112 @@ size_t sgl_copy_sgl(struct scatterlist *d_sgl, unsigned int d_nents, off_t d_ski
return offset;
}
EXPORT_SYMBOL(sgl_copy_sgl);
+
+/**
+ * sgl_compare_sgl_idx - Compare x and y (both sgl_s)
+ * @x_sgl: x (left) sgl
+ * @x_nents: Number of SG entries in x (left) sgl
+ * @x_skip: Number of bytes to skip in x (left) before starting
+ * @y_sgl: y (right) sgl
+ * @y_nents: Number of SG entries in y (right) sgl
+ * @y_skip: Number of bytes to skip in y (right) before starting
+ * @n_bytes: The (maximum) number of bytes to compare
+ * @miscompare_idx: if return is false, index of first miscompare written
+ * to this pointer (if non-NULL). Value will be < n_bytes
+ *
+ * Returns:
+ * true if x and y compare equal before x, y or n_bytes is exhausted.
+ * Otherwise on a miscompare, returns false (and stops comparing). If return
+ * is false and miscompare_idx is non-NULL, then index of first miscompared
+ * byte written to *miscompare_idx.
+ *
+ * Notes:
+ * x and y are symmetrical: they can be swapped and the result is the same.
+ *
+ * Implementation is based on memcmp(). x and y segments may overlap.
+ *
+ * The notes in sgl_copy_sgl() about large sgl_s _applies here as well.
+ *
+ **/
+bool sgl_compare_sgl_idx(struct scatterlist *x_sgl, unsigned int x_nents, off_t x_skip,
+ struct scatterlist *y_sgl, unsigned int y_nents, off_t y_skip,
+ size_t n_bytes, size_t *miscompare_idx)
+{
+ bool equ = true;
+ size_t len;
+ size_t offset = 0;
+ struct sg_mapping_iter x_iter, y_iter;
+
+ if (n_bytes == 0)
+ return true;
+ sg_miter_start(&x_iter, x_sgl, x_nents, SG_MITER_ATOMIC | SG_MITER_FROM_SG);
+ sg_miter_start(&y_iter, y_sgl, y_nents, SG_MITER_ATOMIC | SG_MITER_FROM_SG);
+ if (!sg_miter_skip(&x_iter, x_skip))
+ goto fini;
+ if (!sg_miter_skip(&y_iter, y_skip))
+ goto fini;
+
+ while (offset < n_bytes) {
+ if (!sg_miter_next(&x_iter))
+ break;
+ if (!sg_miter_next(&y_iter))
+ break;
+ len = min3(x_iter.length, y_iter.length, n_bytes - offset);
+
+ equ = !memcmp(x_iter.addr, y_iter.addr, len);
+ if (!equ)
+ goto fini;
+ offset += len;
+ /* LIFO order is important when SG_MITER_ATOMIC is used */
+ y_iter.consumed = len;
+ sg_miter_stop(&y_iter);
+ x_iter.consumed = len;
+ sg_miter_stop(&x_iter);
+ }
+fini:
+ if (miscompare_idx && !equ) {
+ u8 *xp = x_iter.addr;
+ u8 *yp = y_iter.addr;
+ u8 *x_endp;
+
+ for (x_endp = xp + len ; xp < x_endp; ++xp, ++yp) {
+ if (*xp != *yp)
+ break;
+ }
+ *miscompare_idx = offset + len - (x_endp - xp);
+ }
+ sg_miter_stop(&y_iter);
+ sg_miter_stop(&x_iter);
+ return equ;
+}
+EXPORT_SYMBOL(sgl_compare_sgl_idx);
+
+/**
+ * sgl_compare_sgl - Compare x and y (both sgl_s)
+ * @x_sgl: x (left) sgl
+ * @x_nents: Number of SG entries in x (left) sgl
+ * @x_skip: Number of bytes to skip in x (left) before starting
+ * @y_sgl: y (right) sgl
+ * @y_nents: Number of SG entries in y (right) sgl
+ * @y_skip: Number of bytes to skip in y (right) before starting
+ * @n_bytes: The (maximum) number of bytes to compare
+ *
+ * Returns:
+ * true if x and y compare equal before x, y or n_bytes is exhausted.
+ * Otherwise on a miscompare, returns false (and stops comparing).
+ *
+ * Notes:
+ * x and y are symmetrical: they can be swapped and the result is the same.
+ *
+ * Implementation is based on memcmp(). x and y segments may overlap.
+ *
+ * The notes in sgl_copy_sgl() about large sgl_s _applies here as well.
+ *
+ **/
+bool sgl_compare_sgl(struct scatterlist *x_sgl, unsigned int x_nents, off_t x_skip,
+ struct scatterlist *y_sgl, unsigned int y_nents, off_t y_skip,
+ size_t n_bytes)
+{
+ return sgl_compare_sgl_idx(x_sgl, x_nents, x_skip, y_sgl, y_nents, y_skip, n_bytes, NULL);
+}
+EXPORT_SYMBOL(sgl_compare_sgl);
--
2.25.1
Powered by blists - more mailing lists