[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <894afe9b-8534-3a57-efc8-d517aab617fe@somainline.org>
Date: Tue, 19 Jan 2021 22:54:14 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>
To: Vinod Koul <vkoul@...nel.org>, Stephen Boyd <sboyd@...nel.org>
Cc: linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Vivek Aknurwar <viveka@...eaurora.org>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Taniya Das <tdas@...eaurora.org>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Jeevan Shriram <jshriram@...eaurora.org>
Subject: Re: [PATCH v4 3/5] clk: qcom: clk-alpha-pll: Add support for Lucid
5LPE PLL
Il 18/01/21 05:43, Vinod Koul ha scritto:
> From: Vivek Aknurwar <viveka@...eaurora.org>
>
> Lucid 5LPE is a slightly different Lucid PLL with different offsets and
> porgramming sequence so add support for these
>
> Signed-off-by: Vivek Aknurwar <viveka@...eaurora.org>
> Signed-off-by: Jeevan Shriram <jshriram@...eaurora.org>
> [vkoul: rebase and tidy up for upstream]
> Signed-off-by: Vinod Koul <vkoul@...nel.org>
> ---
> drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
> drivers/clk/qcom/clk-alpha-pll.h | 4 +
> 2 files changed, 177 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index a30ea7b09224..f9c48da21bd1 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> /* LUCID PLL specific settings and offsets */
> #define LUCID_PCAL_DONE BIT(27)
>
> +/* LUCID 5LPE PLL specific settings and offsets */
> +#define LUCID_5LPE_PCAL_DONE BIT(11)
> +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH BIT(13)
> +#define LUCID_5LPE_PLL_LATCH_INPUT BIT(14)
> +#define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21)
> +
> #define pll_alpha_width(p) \
> ((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \
> ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
> @@ -1604,3 +1610,170 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
> .set_rate = clk_alpha_pll_agera_set_rate,
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
> +
> +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> + if (ret)
> + return ret;
> +
> + /* If in FSM mode, just vote for it */
> + if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> + ret = clk_enable_regmap(hw);
> + if (ret)
> + return ret;
> + return wait_for_pll_enable_lock(pll);
> + }
> +
> + /* Check if PLL is already enabled, return if enabled */
> + ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> + if (ret)
> + return ret;
> +
> + regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
> +
> + ret = wait_for_pll_enable_lock(pll);
> + if (ret)
> + return ret;
> +
> + /* Enable the PLL outputs */
> + ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
> + if (ret)
> + return ret;
> +
> + /* Enable the global PLL outputs */
> + return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> +}
> +
> +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> + if (ret)
> + return;
> +
> + /* If in FSM mode, just unvote it */
> + if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
> + clk_disable_regmap(hw);
> + return;
> + }
> +
> + /* Disable the global PLL output */
> + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
> + if (ret)
> + return;
> +
> + /* Disable the PLL outputs */
> + ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
> + if (ret)
> + return;
> +
> + /* Place the PLL mode in STANDBY */
> + regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
> +}
> +
> +/*
> + * The Lucid 5LPE PLL requires a power-on self-calibration which happens
> + * when the PLL comes out of reset. Calibrate in case it is not completed.
> + */
> +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + struct clk_hw *p;
> + u32 val;
> + int ret;
> +
> + /* Return early if calibration is not needed. */
> + regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> + if (val & LUCID_5LPE_PCAL_DONE)
> + return 0;
> +
> + p = clk_hw_get_parent(hw);
> + if (!p)
> + return -EINVAL;
> +
> + ret = alpha_pll_lucid_5lpe_enable(hw);
> + if (ret)
> + return ret;
> +
> + alpha_pll_lucid_5lpe_disable(hw);
> +
> + return 0;
> +}
> +
> +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long prate)
> +{
> + return __alpha_pll_trion_set_rate(hw, rate, prate,
> + LUCID_5LPE_PLL_LATCH_INPUT,
> + LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
> +}
> +
> +static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
> + int i, val = 0, div, ret;
> + u32 mask;
> +
> + /*
> + * If the PLL is in FSM mode, then treat set_rate callback as a
> + * no-operation.
> + */
> + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
> + if (ret)
> + return ret;
> +
> + if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
> + return 0;
> +
> + div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> + for (i = 0; i < pll->num_post_div; i++) {
> + if (pll->post_div_table[i].div == div) {
> + val = pll->post_div_table[i].val;
> + break;
> + }
> + }
> +
> + mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
> + return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> + mask, val << pll->post_div_shift);
> +}
> +
> +const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
> + .prepare = alpha_pll_lucid_5lpe_prepare,
> + .enable = alpha_pll_lucid_5lpe_enable,
> + .disable = alpha_pll_lucid_5lpe_disable,
> + .is_enabled = clk_trion_pll_is_enabled,
> + .recalc_rate = clk_trion_pll_recalc_rate,
> + .round_rate = clk_alpha_pll_round_rate,
> + .set_rate = alpha_pll_lucid_5lpe_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
> + .enable = alpha_pll_lucid_5lpe_enable,
> + .disable = alpha_pll_lucid_5lpe_disable,
> + .is_enabled = clk_trion_pll_is_enabled,
> + .recalc_rate = clk_trion_pll_recalc_rate,
> + .round_rate = clk_alpha_pll_round_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
> +
> +const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
> + .recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
> + .round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
> + .set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
> +};
> +EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index 0ea30d2f3da1..6943e933be0f 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -144,6 +144,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops;
> extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
> extern const struct clk_ops clk_alpha_pll_agera_ops;
>
> +extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
> +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
> +
> void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> const struct alpha_pll_config *config);
> void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>
Thanks for following my suggestion!
Reviewed-by: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>
Powered by blists - more mailing lists