linux-kernel - [PATCH net v2] net: mscc: ocelot: Fix multicast to the CPU port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210119140638.203374-1-alban.bedel@aerq.com>
Date:   Tue, 19 Jan 2021 15:06:38 +0100
From:   Alban Bedel <alban.bedel@...q.com>
To:     Vladimir Oltean <vladimir.oltean@....com>
CC:     Claudiu Manoil <claudiu.manoil@....com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        UNGLinuxDriver@...rochip.com,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Alban Bedel <alban.bedel@...q.com>
Subject: [PATCH net v2] net: mscc: ocelot: Fix multicast to the CPU port

Multicast entries in the MAC table use the high bits of the MAC
address to encode the ports that should get the packets. But this port
mask does not work for the CPU port, to receive these packets on the
CPU port the MAC_CPU_COPY flag must be set.

Because of this IPv6 was effectively not working because neighbor
solicitations were never received. This was not apparent before commit
9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb
entries) as the IPv6 entries were broken so all incoming IPv6
multicast was then treated as unknown and flooded on all ports.

To fix this problem rework the ocelot_mact_learn() to set the
MAC_CPU_COPY flag when a multicast entry that target the CPU port is
added. For this we have to read back the ports endcoded in the pseudo
MAC address by the caller. It is not a very nice design but that avoid
changing the callers and should make backporting easier.

Signed-off-by: Alban Bedel <alban.bedel@...q.com>
Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries")

---
Changelog:

v2: - Fix inside ocelot_mact_learn() as suggested by Vladimir Oltean
      to avoid changing the callers and making backport easier.
    - Fixed the Fixes tag to have a 12 digits hash
---
 drivers/net/ethernet/mscc/ocelot.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 0b9992bd6626..ff87a0bc089c 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -60,14 +60,27 @@ int ocelot_mact_learn(struct ocelot *ocelot, int port,
 		      const unsigned char mac[ETH_ALEN],
 		      unsigned int vid, enum macaccess_entry_type type)
 {
+	u32 cmd = ANA_TABLES_MACACCESS_VALID |
+		ANA_TABLES_MACACCESS_DEST_IDX(port) |
+		ANA_TABLES_MACACCESS_ENTRYTYPE(type) |
+		ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_LEARN);
+	unsigned int mc_ports;
+
+	/* Set MAC_CPU_COPY if the CPU port is used by a multicast entry */
+	if (type == ENTRYTYPE_MACv4)
+		mc_ports = (mac[1] << 8) | mac[2];
+	else if (type == ENTRYTYPE_MACv6)
+		mc_ports = (mac[0] << 8) | mac[1];
+	else
+		mc_ports = 0;
+
+	if (mc_ports & BIT(ocelot->num_phys_ports))
+		cmd |= ANA_TABLES_MACACCESS_MAC_CPU_COPY;
+
 	ocelot_mact_select(ocelot, mac, vid);
 
 	/* Issue a write command */
-	ocelot_write(ocelot, ANA_TABLES_MACACCESS_VALID |
-			     ANA_TABLES_MACACCESS_DEST_IDX(port) |
-			     ANA_TABLES_MACACCESS_ENTRYTYPE(type) |
-			     ANA_TABLES_MACACCESS_MAC_TABLE_CMD(MACACCESS_CMD_LEARN),
-			     ANA_TABLES_MACACCESS);
+	ocelot_write(ocelot, cmd, ANA_TABLES_MACACCESS);
 
 	return ocelot_mact_wait_for_completion(ocelot);
 }
-- 
2.25.1