Message-ID: <CAMuHMdVTKEy3rbdYYUKS+L1pY0y0ctMWRXNf7o+hJWyGR7L-Dg@mail.gmail.com>
Date:   Tue, 19 Jan 2021 10:05:43 +0100
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     Saravana Kannan <saravanak@...gle.com>
Cc:     Marc Zyngier <maz@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Android Kernel Team <kernel-team@...roid.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Jisheng Zhang <Jisheng.Zhang@...aptics.com>,
        Kevin Hilman <khilman@...libre.com>,
        John Stultz <john.stultz@...aro.org>,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH v1 5/5] driver core: Set fw_devlink=on by default

Hi Saravana,

On Mon, Jan 18, 2021 at 10:19 PM Saravana Kannan <saravanak@...gle.com> wrote:
> On Mon, Jan 18, 2021 at 11:16 AM Geert Uytterhoeven
> <geert@...ux-m68k.org> wrote:
> > On Mon, Jan 18, 2021 at 6:59 PM Marc Zyngier <maz@...nel.org> wrote:
> > > On 2021-01-18 17:39, Geert Uytterhoeven wrote:
> > > > On Fri, Dec 18, 2020 at 4:34 AM Saravana Kannan <saravanak@...gle.com>
> > > > wrote:
> > > >> Cyclic dependencies in some firmware was one of the last remaining
> > > >> reasons fw_devlink=on couldn't be set by default. Now that cyclic
> > > >> dependencies don't block probing, set fw_devlink=on by default.
> > > >>
> > > >> Setting fw_devlink=on by default brings a bunch of benefits
> > > >> (currently,
> > > >> only for systems with device tree firmware):
> > > >> * Significantly cuts down deferred probes.
> > > >> * Device probe is effectively attempted in graph order.
> > > >> * Makes it much easier to load drivers as modules without having to
> > > >>   worry about functional dependencies between modules (depmod is still
> > > >>   needed for symbol dependencies).
> > > >>
> > > >> If this patch prevents some devices from probing, it's very likely due
> > > >> to the system having one or more device drivers that "probe"/set up a
> > > >> device (DT node with compatible property) without creating a struct
> > > >> device for it.  If we hit such cases, the device drivers need to be
> > > >> fixed so that they populate struct devices and probe them like normal
> > > >> device drivers so that the driver core is aware of the devices and
> > > >> their
> > > >> status. See [1] for an example of such a case.
> > > >>
> > > >> [1] -
> > > >> https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com/
> > > >> Signed-off-by: Saravana Kannan <saravanak@...gle.com>
> > > >
> > > > Shimoda-san reported that next-20210111 and later fail to boot
> > > > on Renesas R-Car Gen3 platforms. No output is seen, unless earlycon
> > > > is enabled.
> > > >
> > > > I have bisected this to commit e590474768f1cc04 ("driver core: Set
> > > > fw_devlink=on by default").
> > >
> > > There is a tentative patch from Saravana here[1], which works around
> > > some issues on my RK3399 platform, and it'd be interesting to find
> > > out whether that helps on your system.
> > >
> > > Thanks,
> > >
> > >          M.
> > >
> > > [1]
> > > https://lore.kernel.org/r/20210116011412.3211292-1-saravanak@google.com
> >
> > Thanks for the suggestion, but given no devices probe (incl. GPIO
> > providers), I'm afraid it won't help. [testing] Indeed.
> >
> > With the debug prints in device_links_check_suppliers enabled, and
> > some postprocessing, I get:
> >
> >     255 supplier e6180000.system-controller not ready
> >       9 supplier fe990000.iommu not ready
> >       9 supplier fe980000.iommu not ready
> >       6 supplier febd0000.iommu not ready
> >       6 supplier ec670000.iommu not ready
> >       3 supplier febe0000.iommu not ready
> >       3 supplier e7740000.iommu not ready
> >       3 supplier e6740000.iommu not ready
> >       3 supplier e65ee000.usb-phy not ready
> >       3 supplier e6570000.iommu not ready
> >       3 supplier e6054000.gpio not ready
> >       3 supplier e6053000.gpio not ready
> >
> > As everything is part of a PM Domain, the (lack of the) system controller
> > must be the culprit. What's wrong with it? It is registered very early in
> > the boot:
> >
> > [    0.142096] rcar_sysc_pd_init:442: of_genpd_add_provider_onecell() returned 0

> Looks like you found the important logs. Can you please enable all
> these logs and send the early con logs as an attachment (so I don't
> need to deal with lines getting wrapped)?
> 1. The ones in device_links_check_suppliers()
> 2. The ones in device_link_add()
> 3. initcall_debug=1

I have attached[*] the requested log.

> That should help us figure out what's going on. Also, what's the DT
> that corresponds to one of the boards that see this issue?

arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts

> Lastly, can you please pick up these 3 patches (some need clean up
> before they merge) to make sure it's not an issue being worked on from
> other bug reports?
> https://lore.kernel.org/lkml/20210116011412.3211292-1-saravanak@google.com/
> https://lore.kernel.org/lkml/20210115210159.3090203-1-saravanak@google.com/
> https://lore.kernel.org/lkml/20201218210750.3455872-1-saravanak@google.com/
>
> I have a strong hunch the 2nd one will fix your issues. fw_devlink can
> handle cyclic dependencies now (it basically reverts to
> fw_devlink=permissive mode for devices in the cycle), but it needs to
> "see" all the dependencies to know there's a cycle. So want to make
> sure it "sees" the "gpios" binding used all over some of the Renesas
> DT files.

These patches don't help.
The 2nd one actually introduces a new failure:

     OF: /soc/i2c@...d8000/gpio@...pcie-sata-switch-hog: could not get
#gpio-cells for /cpus/cpu@102

Note that my issues don't seem to be GPIO-related at all.

BTW, you are aware IOMMUs and DMA controllers are optional?
I.e. device drivers with iommus and/or dmas DT properties where the
targets of these properties do not have a driver should still be probed,
eventually.  But if the IOMMU or DMA drivers are present, they should be
probed first, so the device drivers can make use of them.

Thanks!

[*] Although attaching means people like myself cannot read and comment
    on the log easily, without saving the attachment first.
    That's also the reason why patches should be submitted inline...

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Download attachment "dmesg-5.11.0-rc2-salvator-x-00011-g7b0c4737861f-dirty" of type "application/octet-stream" (123833 bytes)

Powered by blists - more mailing lists