| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210119190420.GA2497424@bjorn-Precision-5520>
Date: Tue, 19 Jan 2021 13:04:20 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
Jonathan Corbet <corbet@....net>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Arnd Bergmann <arnd@...db.de>, Jon Mason <jdmason@...zu.us>,
Dave Jiang <dave.jiang@...el.com>,
Allen Hubbe <allenbh@...il.com>,
Tom Joseph <tjoseph@...ence.com>,
Rob Herring <robh@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-pci@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-ntb@...glegroups.com
Subject: Re: [PATCH v9 13/17] PCI: endpoint: Add EP function driver to
provide NTB functionality
On Mon, Jan 04, 2021 at 08:59:05PM +0530, Kishon Vijay Abraham I wrote:
> Add a new endpoint function driver to provide NTB functionality
> using multiple PCIe endpoint instances.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
Several typos below if there's any opportunity for revision.
> ---
> drivers/pci/endpoint/functions/Kconfig | 12 +
> drivers/pci/endpoint/functions/Makefile | 1 +
> drivers/pci/endpoint/functions/pci-epf-ntb.c | 2114 ++++++++++++++++++
> 3 files changed, 2127 insertions(+)
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-ntb.c
>
> diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
> index 8820d0f7ec77..24bfb2af65a1 100644
> --- a/drivers/pci/endpoint/functions/Kconfig
> +++ b/drivers/pci/endpoint/functions/Kconfig
> @@ -12,3 +12,15 @@ config PCI_EPF_TEST
> for PCI Endpoint.
>
> If in doubt, say "N" to disable Endpoint test driver.
> +
> +config PCI_EPF_NTB
> + tristate "PCI Endpoint NTB driver"
> + depends on PCI_ENDPOINT
> + help
> + Select this configuration option to enable the NTB driver
> + for PCI Endpoint. NTB driver implements NTB controller
> + functionality using multiple PCIe endpoint instances. It
> + can support NTB endpoint function devices created using
> + device tree.
> +
> + If in doubt, say "N" to disable Endpoint NTB driver.
> diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
> index d6fafff080e2..96ab932a537a 100644
> --- a/drivers/pci/endpoint/functions/Makefile
> +++ b/drivers/pci/endpoint/functions/Makefile
> @@ -4,3 +4,4 @@
> #
>
> obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o
> +obj-$(CONFIG_PCI_EPF_NTB) += pci-epf-ntb.o
> diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> new file mode 100644
> index 000000000000..e2dc5cae5c81
> --- /dev/null
> +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> @@ -0,0 +1,2114 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * Endpoint Function Driver to implement Non-Transparent Bridge functionality
> + *
> + * Copyright (C) 2020 Texas Instruments
> + * Author: Kishon Vijay Abraham I <kishon@...com>
> + */
> +
> +/*
> + *The PCI NTB function driver configures the SoC with multiple PCIe Endpoint(EP)
> + *controller instances (see diagram below) in such a way that transaction from
> + *one EP controller is routed to the other EP controller. Once PCI NTB function
> + *driver configures the SoC with multiple EP instances, HOST1 and HOST2 can
> + *communicate with each other using SoC as a bridge.
It's typical to use a space between the "*" and the text (also
diagrams below).
s/transaction from ... is/transactions from ... are/
> + *
> + * +-------------+ +-------------+
> + * | | | |
> + * | HOST1 | | HOST2 |
> + * | | | |
> + * +------^------+ +------^------+
> + * | |
> + * | |
> + *+---------|-------------------------------------------------|---------+
> + *| +------v------+ +------v------+ |
> + *| | | | | |
> + *| | EP | | EP | |
> + *| | CONTROLLER1 | | CONTROLLER2 | |
> + *| | <-----------------------------------> | |
> + *| | | | | |
> + *| | | | | |
> + *| | | SoC With Multiple EP Instances | | |
> + *| | | (Configured using NTB Function) | | |
> + *| +-------------+ +-------------+ |
> + *+---------------------------------------------------------------------+
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +
> +#include <linux/pci-epc.h>
> +#include <linux/pci-epf.h>
> +
> +static struct workqueue_struct *kpcintb_workqueue;
> +
> +#define COMMAND_CONFIGURE_DOORBELL 1
> +#define COMMAND_TEARDOWN_DOORBELL 2
> +#define COMMAND_CONFIGURE_MW 3
> +#define COMMAND_TEARDOWN_MW 4
> +#define COMMAND_LINK_UP 5
> +#define COMMAND_LINK_DOWN 6
> +
> +#define COMMAND_STATUS_OK 1
> +#define COMMAND_STATUS_ERROR 2
> +
> +#define LINK_STATUS_UP BIT(0)
> +
> +#define SPAD_COUNT 64
> +#define DB_COUNT 4
> +#define NTB_MW_OFFSET 2
> +#define DB_COUNT_MASK GENMASK(15, 0)
> +#define MSIX_ENABLE BIT(16)
> +#define MAX_DB_COUNT 32
> +#define MAX_MW 4
> +
> +enum epf_ntb_bar {
> + BAR_CONFIG,
> + BAR_PEER_SPAD,
> + BAR_DB_MW1,
> + BAR_MW2,
> + BAR_MW3,
> + BAR_MW4,
> +};
> +
> +struct epf_ntb {
> + u32 num_mws;
> + u32 db_count;
> + u32 spad_count;
> + struct pci_epf *epf;
> + u64 mws_size[MAX_MW];
> + struct config_group group;
> + struct epf_ntb_epc *epc[2];
> +};
> +
> +#define to_epf_ntb(epf_group) container_of((epf_group), struct epf_ntb, group)
> +
> +struct epf_ntb_epc {
> + u8 func_no;
> + bool linkup;
> + bool is_msix;
> + int msix_bar;
> + u32 spad_size;
> + struct pci_epc *epc;
> + struct epf_ntb *epf_ntb;
> + void __iomem *mw_addr[6];
> + size_t msix_table_offset;
> + struct epf_ntb_ctrl *reg;
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno epf_ntb_bar[6];
> + struct delayed_work cmd_handler;
> + enum pci_epc_interface_type type;
> + const struct pci_epc_features *epc_features;
> +};
> +
> +struct epf_ntb_ctrl {
> + u32 command;
> + u32 argument;
> + u16 command_status;
> + u16 link_status;
> + u32 topology;
> + u64 addr;
> + u64 size;
> + u32 num_mws;
> + u32 mw1_offset;
> + u32 spad_offset;
> + u32 spad_count;
> + u32 db_entry_size;
> + u32 db_data[MAX_DB_COUNT];
> + u32 db_offset[MAX_DB_COUNT];
> +} __packed;
> +
> +static struct pci_epf_header epf_ntb_header = {
> + .vendorid = PCI_ANY_ID,
> + .deviceid = PCI_ANY_ID,
> + .baseclass_code = PCI_BASE_CLASS_MEMORY,
> + .interrupt_pin = PCI_INTERRUPT_INTA,
> +};
> +
> +/**
> + * epf_ntb_link_up() - Raise link_up interrupt to both the hosts
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @link_up: true or false indicating Link is UP or Down
> + *
> + * Once NTB function in HOST1 and the NTB function in HOST2 invoke
> + * ntb_link_enable(), this NTB function driver will trigger a link event to
> + * the NTB client in both the hosts.
> + */
> +static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
> +{
> + enum pci_epc_interface_type type;
> + enum pci_epc_irq_type irq_type;
> + struct epf_ntb_epc *ntb_epc;
> + struct epf_ntb_ctrl *ctrl;
> + bool is_msix;
> + u8 func_no;
> + int ret;
> +
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
> + ntb_epc = ntb->epc[type];
> + func_no = ntb_epc->func_no;
> + is_msix = ntb_epc->is_msix;
> + ctrl = ntb_epc->reg;
> + if (link_up)
> + ctrl->link_status |= LINK_STATUS_UP;
> + else
> + ctrl->link_status &= ~LINK_STATUS_UP;
> + irq_type = is_msix ? PCI_EPC_IRQ_MSIX : PCI_EPC_IRQ_MSI;
> + ret = pci_epc_raise_irq(ntb_epc->epc, func_no, irq_type,
> + 1);
> + if (ret < 0) {
> + WARN(1, "%s intf: Failed to raise Link Up IRQ\n",
> + pci_epc_interface_string(type));
Do we not have a dev available here? Several messages below use
dev_err(); can we do the same here?
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_configure_mw() - Configure the Outbound Address Space for one host
> + * to access the memory window of other host
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + * @mw: Index of the memory window (either 0, 1, 2 or 3)
> + *
> + *+-----------------+ +----->+----------------+-----------+-----------------+
> + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
> + *+-----------------+ | +----------------+ +-----------------+
> + *| BAR1 | | | Doorbell 2 +---------+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+
> + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
> + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+
> + *+-----------------+ | |----------------+ | | | |
> + *| BAR4 | | | | | | +-----------------+
> + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
> + *| BAR5 | | | | | | +-----------------+
> + *+-----------------+ +----->-----------------+ | | | |
> + * EP CONTROLLER 1 | | | | +-----------------+
> + * | | | +---->+ MSI|X ADDRESS 4 |
> + * +----------------+ | +-----------------+
> + * (A) EP CONTROLLER 2 | | |
> + * (OB SPACE) | | |
> + * +-------> MW1 |
> + * | |
> + * | |
> + * (B) +-----------------+
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * +-----------------+
> + * PCI Address Space
> + * (Managed by HOST2)
> + *
> + * This function performs stage (B) in the above diagram (see MW1) i.e map OB
> + * address space of memory window to PCI address space.
s/i.e/i.e.,/
> + *
> + * This operation requires 3 parameters
> + * 1) Address in the outbound address space
> + * 2) Address in the PCIe Address space
s/PCIe/PCI/ (since that's what you called it above and there really
isn't anything PCIe-specific here)
> + * 3) Size of the address region that is requested to be mapped
s/that is requested to be/to be/
> + * The address in the outbound address space (for MW1, MW2, MW3 and MW4) is
> + * stored in epf_bar corresponding to BAR_DB_MW1 for MW1 and BAR_MW2, BAR_MW3
> + * BAR_MW4 for rest of the BARs of epf_ntb_epc that is connected to HOST1. This
> + * is populated in epf_ntb_alloc_peer_mem() in this driver.
> + *
> + * The address and size of the PCIe address region that has to be mapped would
s/PCIe/PCI/ again
> + * be provided by HOST2 in ctrl->addr and ctrl->size of epf_ntb_epc that is
> + * connected to HOST2.
> + *
> + * Please note Memory window1 (MW1) and Doorbell registers together will be
> + * mapped to a single BAR (BAR2) above for 32-bit BARs. The exact BAR that's
> + * used for Memory window (MW) can be obtained from epf_ntb_bar[BAR_DB_MW1],
> + * epf_ntb_bar[BAR_MW2], epf_ntb_bar[BAR_MW2], epf_ntb_bar[BAR_MW2].
> + */
> +static int
> +epf_ntb_configure_mw(struct epf_ntb *ntb, enum pci_epc_interface_type type,
> + u32 mw)
Return type & function name normally on same line (more occurrences
below).
> +{
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + struct pci_epf_bar *peer_epf_bar;
> + enum pci_barno peer_barno;
> + struct epf_ntb_ctrl *ctrl;
> + phys_addr_t phys_addr;
> + struct pci_epc *epc;
> + u64 addr, size;
> + int ret = 0;
> + u8 func_no;
> +
> + ntb_epc = ntb->epc[type];
> + epc = ntb_epc->epc;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_barno = peer_ntb_epc->epf_ntb_bar[mw + NTB_MW_OFFSET];
> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
> +
> + phys_addr = peer_epf_bar->phys_addr;
> + ctrl = ntb_epc->reg;
> + addr = ctrl->addr;
> + size = ctrl->size;
> + if (mw + NTB_MW_OFFSET == BAR_DB_MW1)
> + phys_addr += ctrl->mw1_offset;
> +
> + if (size > ntb->mws_size[mw]) {
> + WARN(1, "%s intf: MW: %d Req Sz:%llxx > Supported Sz:%llx\n",
> + pci_epc_interface_string(type), mw, size,
> + ntb->mws_size[mw]);
> + ret = -EINVAL;
> + goto err_invalid_size;
> + }
> +
> + func_no = ntb_epc->func_no;
> +
> + ret = pci_epc_map_addr(epc, func_no, phys_addr, addr, size);
> + WARN(ret < 0, "%s intf: Failed to map memory window %d address\n",
> + pci_epc_interface_string(type), mw);
> +
> +err_invalid_size:
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_teardown_mw() - Teardown the configured OB ATU
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + * @mw: Index of the memory window (either 0, 1, 2 or 3)
> + *
> + * Teardown the configured OB ATU configured in epf_ntb_configure_mw() using
> + * pci_epc_unmap_addr()
> + */
> +static void
> +epf_ntb_teardown_mw(struct epf_ntb *ntb, enum pci_epc_interface_type type,
> + u32 mw)
> +{
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + struct pci_epf_bar *peer_epf_bar;
> + enum pci_barno peer_barno;
> + struct epf_ntb_ctrl *ctrl;
> + phys_addr_t phys_addr;
> + struct pci_epc *epc;
> + u8 func_no;
> +
> + ntb_epc = ntb->epc[type];
> + epc = ntb_epc->epc;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_barno = peer_ntb_epc->epf_ntb_bar[mw + NTB_MW_OFFSET];
> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
> +
> + phys_addr = peer_epf_bar->phys_addr;
> + ctrl = ntb_epc->reg;
> + if (mw + NTB_MW_OFFSET == BAR_DB_MW1)
> + phys_addr += ctrl->mw1_offset;
> + func_no = ntb_epc->func_no;
> +
> + pci_epc_unmap_addr(epc, func_no, phys_addr);
> +}
> +
> +/**
> + * epf_ntb_configure_msi() - Map OB address space to MSI address
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + * @db_count: Number of doorbell interrupts to map
> + *
> + *+-----------------+ +----->+----------------+-----------+-----------------+
> + *| BAR0 | | | Doorbell 1 +---+-------> MSI ADDRESS |
> + *+-----------------+ | +----------------+ | +-----------------+
> + *| BAR1 | | | Doorbell 2 +---+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR2 | | Doorbell 3 +---+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR3 | | | Doorbell 4 +---+ | |
> + *+-----------------+ | |----------------+ | |
> + *| BAR4 | | | | | |
> + *+-----------------+ | | MW1 | | |
> + *| BAR5 | | | | | |
> + *+-----------------+ +----->-----------------+ | |
> + * EP CONTROLLER 1 | | | |
> + * | | | |
> + * +----------------+ +-----------------+
> + * (A) EP CONTROLLER 2 | |
> + * (OB SPACE) | |
> + * | MW1 |
> + * | |
> + * | |
> + * (B) +-----------------+
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * +-----------------+
> + * PCI Address Space
> + * (Managed by HOST2)
> + *
> + *
> + * This function performs stage (B) in the above diagram (see Doorbell 1,
> + * Doorbell 2, Doorbell 3, Doorbell 4) i.e map OB address space corresponding to
> + * doorbell to MSI address in PCI address space.
> + *
> + * This operation requires 3 parameters
> + * 1) Address reserved for doorbell in the outbound address space
> + * 2) MSI-X address in the PCIe Address space
> + * 3) Number of MSI-X interrupts that has to be configured
> + *
> + * The address in the outbound address space (for the Doorbell) is stored in
> + * epf_bar corresponding to BAR_DB_MW1 of epf_ntb_epc that is connected to
> + * HOST1. This is populated in epf_ntb_alloc_peer_mem() in this driver along
> + * with address for MW1.
> + *
> + * pci_epc_map_msi_irq() takes the MSI address from MSI capability register
> + * and maps the OB address (obtained in epf_ntb_alloc_peer_mem()) to the MSI
> + * address.
> + *
> + * epf_ntb_configure_msi() also stores the MSI data to raise each interrupt
> + * in db_data of the peer's control region. This helps the peer to raise
> + * doorbell of the other host by writing db_data to the BAR corresponding to
> + * BAR_DB_MW1.
> + */
> +static int
> +epf_ntb_configure_msi(struct epf_ntb *ntb, enum pci_epc_interface_type type,
> + u16 db_count)
> +{
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + u32 db_entry_size, db_data, db_offset;
> + struct pci_epf_bar *peer_epf_bar;
> + struct epf_ntb_ctrl *peer_ctrl;
> + enum pci_barno peer_barno;
> + phys_addr_t phys_addr;
> + struct pci_epc *epc;
> + u8 func_no;
> + int ret, i;
> +
> + ntb_epc = ntb->epc[type];
> + epc = ntb_epc->epc;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1];
> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
> + peer_ctrl = peer_ntb_epc->reg;
> + db_entry_size = peer_ctrl->db_entry_size;
> +
> + phys_addr = peer_epf_bar->phys_addr;
> + func_no = ntb_epc->func_no;
> +
> + ret = pci_epc_map_msi_irq(epc, func_no, phys_addr, db_count,
> + db_entry_size, &db_data, &db_offset);
> + if (ret < 0) {
> + WARN(1, "%s intf: Failed to map MSI IRQ\n",
> + pci_epc_interface_string(type));
> + return ret;
> + }
> +
> + for (i = 0; i < db_count; i++) {
> + peer_ctrl->db_data[i] = db_data | i;
> + peer_ctrl->db_offset[i] = db_offset;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_configure_msix() - Map OB address space to MSI-X address
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + * @db_count: Number of doorbell interrupts to map
> + *
> + *+-----------------+ +----->+----------------+-----------+-----------------+
> + *| BAR0 | | | Doorbell 1 +-----------> MSI-X ADDRESS 1 |
> + *+-----------------+ | +----------------+ +-----------------+
> + *| BAR1 | | | Doorbell 2 +---------+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+
> + *+-----------------+----+ +----------------+ | +-> MSI-X ADDRESS 2 |
> + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+
> + *+-----------------+ | |----------------+ | | | |
> + *| BAR4 | | | | | | +-----------------+
> + *+-----------------+ | | MW1 + | +-->+ MSI-X ADDRESS 3||
> + *| BAR5 | | | | | +-----------------+
> + *+-----------------+ +----->-----------------+ | | |
> + * EP CONTROLLER 1 | | | +-----------------+
> + * | | +---->+ MSI-X ADDRESS 4 |
> + * +----------------+ +-----------------+
> + * (A) EP CONTROLLER 2 | |
> + * (OB SPACE) | |
> + * | MW1 |
> + * | |
> + * | |
> + * (B) +-----------------+
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * +-----------------+
> + * PCI Address Space
> + * (Managed by HOST2)
> + *
> + * This function performs stage (B) in the above diagram (see Doorbell 1,
> + * Doorbell 2, Doorbell 3, Doorbell 4) i.e map OB address space corresponding to
> + * doorbell to MSI-X address in PCI address space.
> + *
> + * This operation requires 3 parameters
> + * 1) Address reserved for doorbell in the outbound address space
> + * 2) MSI-X address in the PCIe Address space
> + * 3) Number of MSI-X interrupts that has to be configured
> + *
> + * The address in the outbound address space (for the Doorbell) is stored in
> + * epf_bar corresponding to BAR_DB_MW1 of epf_ntb_epc that is connected to
> + * HOST1. This is populated in epf_ntb_alloc_peer_mem() in this driver along
> + * with address for MW1.
Add blank line if the below is a new paragraph. Otherwise, reflow.
> + * The MSI-X address is in the MSI-X table of EP CONTROLLER 2 and
> + * the count of doorbell is in ctrl->argument of epf_ntb_epc that is connected
> + * to HOST2. MSI-X table is stored memory mapped to ntb_epc->msix_bar and the
> + * offset is in ntb_epc->msix_table_offset. From this epf_ntb_configure_msix()
> + * gets the MSI-X address and MSI-X data
s/MSI-X address and MSI-X data/MSI-X address and data/
Period at end of sentence.
> + *
> + * epf_ntb_configure_msix() also stores the MSI-X data to raise each interrupt
> + * in db_data of the peer's control region. This helps the peer to raise
> + * doorbell of the other host by writing db_data to the BAR corresponding to
> + * BAR_DB_MW1.
> + */
> +static int epf_ntb_configure_msix(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type,
> + u16 db_count)
> +{
> + const struct pci_epc_features *epc_features;
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + struct pci_epf_bar *peer_epf_bar, *epf_bar;
> + struct pci_epf_msix_tbl *msix_tbl;
> + struct epf_ntb_ctrl *peer_ctrl;
> + u32 db_entry_size, msg_data;
> + enum pci_barno peer_barno;
> + phys_addr_t phys_addr;
> + struct pci_epc *epc;
> + size_t align;
> + u64 msg_addr;
> + u8 func_no;
> + int ret, i;
> +
> + ntb_epc = ntb->epc[type];
> + epc = ntb_epc->epc;
> +
> + epf_bar = &ntb_epc->epf_bar[ntb_epc->msix_bar];
> + msix_tbl = epf_bar->addr + ntb_epc->msix_table_offset;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1];
> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
> + phys_addr = peer_epf_bar->phys_addr;
> + peer_ctrl = peer_ntb_epc->reg;
> + epc_features = ntb_epc->epc_features;
> + align = epc_features->align;
> +
> + func_no = ntb_epc->func_no;
> + db_entry_size = peer_ctrl->db_entry_size;
> +
> + for (i = 0; i < db_count; i++) {
> + msg_addr = ALIGN_DOWN(msix_tbl[i].msg_addr, align);
> + msg_data = msix_tbl[i].msg_data;
> + ret = pci_epc_map_addr(epc, func_no, phys_addr, msg_addr,
> + db_entry_size);
> + if (ret)
> + return ret;
> + phys_addr = phys_addr + db_entry_size;
> + peer_ctrl->db_data[i] = msg_data;
> + peer_ctrl->db_offset[i] = msix_tbl[i].msg_addr & (align - 1);
> + }
> + ntb_epc->is_msix = true;
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_configure_db() - Configure the Outbound Address Space for one host
> + * to ring the doorbell of other host
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + * @db_count: Count of the number of doorbells that has to be configured
> + * @msix: Indicates whether MSI-X or MSI should be used
> + *
> + * Invokes epf_ntb_configure_msix() or epf_ntb_configure_msi() required for
> + * one HOST to ring the doorbell of other HOST.
> + */
> +static int
> +epf_ntb_configure_db(struct epf_ntb *ntb, enum pci_epc_interface_type type,
> + u16 db_count, bool msix)
> +{
> + int ret;
> +
> + if (db_count > MAX_DB_COUNT)
> + return -EINVAL;
> +
> + if (msix)
> + ret = epf_ntb_configure_msix(ntb, type, db_count);
> + else
> + ret = epf_ntb_configure_msi(ntb, type, db_count);
> +
> + WARN(ret < 0, "%s intf: Failed to configure DB\n",
> + pci_epc_interface_string(type));
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_teardown_db() - Unmap address in OB address space to MSI/MSI-X
> + * address
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Invoke pci_epc_unmap_addr() to unmap OB address to MSI/MSI-X address.
> + */
> +static void
> +epf_ntb_teardown_db(struct epf_ntb *ntb, enum pci_epc_interface_type type)
> +{
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + struct pci_epf_bar *peer_epf_bar;
> + enum pci_barno peer_barno;
> + phys_addr_t phys_addr;
> + struct pci_epc *epc;
> + u8 func_no;
> +
> + ntb_epc = ntb->epc[type];
> + epc = ntb_epc->epc;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1];
> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
> + phys_addr = peer_epf_bar->phys_addr;
> + func_no = ntb_epc->func_no;
> +
> + pci_epc_unmap_addr(epc, func_no, phys_addr);
> +}
> +
> +/**
> + * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
> + * @work: work_struct for the two epf_ntb_epc (PRIMARY and SECONDARY)
> + *
> + * Workqueue function that gets invoked for the two epf_ntb_epc
> + * periodically (once every 5ms) to see if it has received any commands
> + * from NTB host. The host can send commands to configure doorbell or
> + * configure memory window or to update link status.
> + */
> +static void epf_ntb_cmd_handler(struct work_struct *work)
> +{
> + enum pci_epc_interface_type type;
> + struct epf_ntb_epc *ntb_epc;
> + struct epf_ntb_ctrl *ctrl;
> + u32 command, argument;
> + struct epf_ntb *ntb;
> + struct device *dev;
> + u16 db_count;
> + bool is_msix;
> + int ret;
> +
> + ntb_epc = container_of(work, struct epf_ntb_epc, cmd_handler.work);
> + ctrl = ntb_epc->reg;
> + command = ctrl->command;
> + if (!command)
> + goto reset_handler;
> + argument = ctrl->argument;
> +
> + ctrl->command = 0;
> + ctrl->argument = 0;
> +
> + ctrl = ntb_epc->reg;
> + type = ntb_epc->type;
> + ntb = ntb_epc->epf_ntb;
> + dev = &ntb->epf->dev;
> +
> + switch (command) {
> + case COMMAND_CONFIGURE_DOORBELL:
> + db_count = argument & DB_COUNT_MASK;
> + is_msix = argument & MSIX_ENABLE;
> + ret = epf_ntb_configure_db(ntb, type, db_count, is_msix);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_TEARDOWN_DOORBELL:
> + epf_ntb_teardown_db(ntb, type);
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_CONFIGURE_MW:
> + ret = epf_ntb_configure_mw(ntb, type, argument);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_TEARDOWN_MW:
> + epf_ntb_teardown_mw(ntb, type, argument);
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_LINK_UP:
> + ntb_epc->linkup = true;
> + if (ntb->epc[PRIMARY_INTERFACE]->linkup &&
> + ntb->epc[SECONDARY_INTERFACE]->linkup) {
> + ret = epf_ntb_link_up(ntb, true);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + goto reset_handler;
> + }
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_LINK_DOWN:
> + ntb_epc->linkup = false;
> + ret = epf_ntb_link_up(ntb, false);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + default:
> + dev_err(dev, "%s intf UNKNOWN command: %d\n",
> + pci_epc_interface_string(type), command);
> + break;
> + }
> +
> +reset_handler:
> + queue_delayed_work(kpcintb_workqueue, &ntb_epc->cmd_handler,
> + msecs_to_jiffies(5));
> +}
> +
> +/**
> + * epf_ntb_peer_spad_bar_clear() - Clears Peer Scratchpad BAR
s/Clears/Clear/
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + *+-----------------+------->+------------------+ +-----------------+
> + *| BAR0 | | CONFIG REGION | | BAR0 |
> + *+-----------------+----+ +------------------+<-------+-----------------+
> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
> + *+-----------------+ +-->+------------------+<-------+-----------------+
> + *| BAR2 | Local Memory | BAR2 |
> + *+-----------------+ +-----------------+
> + *| BAR3 | | BAR3 |
> + *+-----------------+ +-----------------+
> + *| BAR4 | | BAR4 |
> + *+-----------------+ +-----------------+
> + *| BAR5 | | BAR5 |
> + *+-----------------+ +-----------------+
> + * EP CONTROLLER 1 EP CONTROLLER 2
> + *
> + * It clears BAR1 of EP CONTROLLER 2 which contains the HOST2's peer scratchpad
> + * region. While BAR1 is the default peer scratchpad BAR, an NTB could have
> + * other BARs for peer scratchpad (because of 64-bit BARs or reserved BARs).
> + * This function can get the exact BAR used for peer scratchpad from
> + * epf_ntb_bar[BAR_PEER_SPAD].
/It clears/Clear/
> + *
> + * Since HOST2's peer scratchpad is also HOST1's self scratchpad, this function
> + * gets the address of peer scratchpad from
> + * peer_ntb_epc->epf_ntb_bar[BAR_CONFIG]
Period at end of sentence.
> + */
> +static void epf_ntb_peer_spad_bar_clear(struct epf_ntb_epc *ntb_epc)
> +{
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno barno;
> + struct pci_epc *epc;
> + u8 func_no;
> +
> + epc = ntb_epc->epc;
> + func_no = ntb_epc->func_no;
> + barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
> + epf_bar = &ntb_epc->epf_bar[barno];
> + pci_epc_clear_bar(epc, func_no, epf_bar);
> +}
> +
> +/**
> + * epf_ntb_peer_spad_bar_set() - Sets peer scratchpad BAR
s/Sets/Set/
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + *+-----------------+------->+------------------+ +-----------------+
> + *| BAR0 | | CONFIG REGION | | BAR0 |
> + *+-----------------+----+ +------------------+<-------+-----------------+
> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
> + *+-----------------+ +-->+------------------+<-------+-----------------+
> + *| BAR2 | Local Memory | BAR2 |
> + *+-----------------+ +-----------------+
> + *| BAR3 | | BAR3 |
> + *+-----------------+ +-----------------+
> + *| BAR4 | | BAR4 |
> + *+-----------------+ +-----------------+
> + *| BAR5 | | BAR5 |
> + *+-----------------+ +-----------------+
> + * EP CONTROLLER 1 EP CONTROLLER 2
> + *
> + * It sets BAR1 of EP CONTROLLER 2 which contains the HOST2's peer scratchpad
> + * region. While BAR1 is the default peer scratchpad BAR, an NTB could have
> + * other BARs for peer scratchpad (because of 64-bit BARs or reserved BARs).
> + * This function can get the exact BAR used for peer scratchpad from
> + * epf_ntb_bar[BAR_PEER_SPAD].
s/It sets/Set/
> + *
> + * Since HOST2's peer scratchpad is also HOST1's self scratchpad, this function
> + * gets the address of peer scratchpad from
> + * peer_ntb_epc->epf_ntb_bar[BAR_CONFIG]
Period at end.
> + */
> +static int
> +epf_ntb_peer_spad_bar_set(struct epf_ntb *ntb, enum pci_epc_interface_type type)
> +{
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + struct pci_epf_bar *peer_epf_bar, *epf_bar;
> + enum pci_barno peer_barno, barno;
> + u32 peer_spad_offset;
> + struct pci_epc *epc;
> + struct device *dev;
> + u8 func_no;
> + int ret;
> +
> + dev = &ntb->epf->dev;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_CONFIG];
> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
> +
> + ntb_epc = ntb->epc[type];
> + barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
> + epf_bar = &ntb_epc->epf_bar[barno];
> + func_no = ntb_epc->func_no;
> + epc = ntb_epc->epc;
> +
> + peer_spad_offset = peer_ntb_epc->reg->spad_offset;
> + epf_bar->phys_addr = peer_epf_bar->phys_addr + peer_spad_offset;
> + epf_bar->size = peer_ntb_epc->spad_size;
> + epf_bar->barno = barno;
> + epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32;
> +
> + ret = pci_epc_set_bar(ntb_epc->epc, func_no, epf_bar);
> + if (ret) {
> + dev_err(dev, "%s intf: peer SPAD BAR set failed\n",
> + pci_epc_interface_string(type));
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_config_sspad_bar_clear() - Clears Config + Self scratchpad BAR
s/Clears/Clear/
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + *+-----------------+------->+------------------+ +-----------------+
> + *| BAR0 | | CONFIG REGION | | BAR0 |
> + *+-----------------+----+ +------------------+<-------+-----------------+
> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
> + *+-----------------+ +-->+------------------+<-------+-----------------+
> + *| BAR2 | Local Memory | BAR2 |
> + *+-----------------+ +-----------------+
> + *| BAR3 | | BAR3 |
> + *+-----------------+ +-----------------+
> + *| BAR4 | | BAR4 |
> + *+-----------------+ +-----------------+
> + *| BAR5 | | BAR5 |
> + *+-----------------+ +-----------------+
> + * EP CONTROLLER 1 EP CONTROLLER 2
> + *
> + * It clears BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
> + * self scratchpad region (removes inbound ATU configuration). While BAR0 is
> + * the default self scratchpad BAR, an NTB could have other BARs for self
> + * scratchpad (because of reserved BARs). This function can get the exact BAR
> + * used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
s/It clears/Clear/
> + *
> + * Please note the self scratchpad region and config region is combined to
> + * a single region and mapped using the same BAR. Also note HOST2's peer
> + * scratchpad is HOST1's self scratchpad.
> + */
> +static void epf_ntb_config_sspad_bar_clear(struct epf_ntb_epc *ntb_epc)
> +{
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno barno;
> + struct pci_epc *epc;
> + u8 func_no;
> +
> + epc = ntb_epc->epc;
> + func_no = ntb_epc->func_no;
> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
> + epf_bar = &ntb_epc->epf_bar[barno];
> + pci_epc_clear_bar(epc, func_no, epf_bar);
> +}
> +
> +/**
> + * epf_ntb_config_sspad_bar_set() - Sets Config + Self scratchpad BAR
s/Sets/Set/
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + *+-----------------+------->+------------------+ +-----------------+
> + *| BAR0 | | CONFIG REGION | | BAR0 |
> + *+-----------------+----+ +------------------+<-------+-----------------+
> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
> + *+-----------------+ +-->+------------------+<-------+-----------------+
> + *| BAR2 | Local Memory | BAR2 |
> + *+-----------------+ +-----------------+
> + *| BAR3 | | BAR3 |
> + *+-----------------+ +-----------------+
> + *| BAR4 | | BAR4 |
> + *+-----------------+ +-----------------+
> + *| BAR5 | | BAR5 |
> + *+-----------------+ +-----------------+
> + * EP CONTROLLER 1 EP CONTROLLER 2
> + *
> + * It maps BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
s/It maps/Map/
> + * self scratchpad region. While BAR0 is the default self scratchpad BAR, an
> + * NTB could have other BARs for self scratchpad (because of reserved BARs).
> + * This function can get the exact BAR used for self scratchpad from
> + * epf_ntb_bar[BAR_CONFIG].
> + *
> + * Please note the self scratchpad region and config region is combined to
> + * a single region and mapped using the same BAR. Also note HOST2's peer
> + * scratchpad is HOST1's self scratchpad.
> + */
> +static int epf_ntb_config_sspad_bar_set(struct epf_ntb_epc *ntb_epc)
> +{
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno barno;
> + struct epf_ntb *ntb;
> + struct pci_epc *epc;
> + struct device *dev;
> + u8 func_no;
> + int ret;
> +
> + ntb = ntb_epc->epf_ntb;
> + dev = &ntb->epf->dev;
> +
> + epc = ntb_epc->epc;
> + func_no = ntb_epc->func_no;
> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
> + epf_bar = &ntb_epc->epf_bar[barno];
> +
> + ret = pci_epc_set_bar(epc, func_no, epf_bar);
> + if (ret) {
> + dev_err(dev, "%s inft: Config/Status/SPAD BAR set failed\n",
> + pci_epc_interface_string(ntb_epc->type));
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_config_spad_bar_free() - Free the physical memory associated with
> + * config + scratchpad region
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + *+-----------------+------->+------------------+ +-----------------+
> + *| BAR0 | | CONFIG REGION | | BAR0 |
> + *+-----------------+----+ +------------------+<-------+-----------------+
> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
> + *+-----------------+ +-->+------------------+<-------+-----------------+
> + *| BAR2 | Local Memory | BAR2 |
> + *+-----------------+ +-----------------+
> + *| BAR3 | | BAR3 |
> + *+-----------------+ +-----------------+
> + *| BAR4 | | BAR4 |
> + *+-----------------+ +-----------------+
> + *| BAR5 | | BAR5 |
> + *+-----------------+ +-----------------+
> + * EP CONTROLLER 1 EP CONTROLLER 2
> + *
> + * This function frees the Local Memory mentioned in the above diagram. After
> + * invoking this function, any of config + self scrathpad region of HOST1 or
> + * peer scratchpad region of HOST2 should not be accessed.
s/This function frees/Free/
s/scrathpad/scratchpad/
> + */
> +static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
> +{
> + enum pci_epc_interface_type type;
> + struct epf_ntb_epc *ntb_epc;
> + enum pci_barno barno;
> + struct pci_epf *epf;
> +
> + epf = ntb->epf;
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
> + ntb_epc = ntb->epc[type];
> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
> + if (ntb_epc->reg)
> + pci_epf_free_space(epf, ntb_epc->reg, barno, type);
> + }
> +}
> +
> +/**
> + * epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad
> + * region
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + *+-----------------+------->+------------------+ +-----------------+
> + *| BAR0 | | CONFIG REGION | | BAR0 |
> + *+-----------------+----+ +------------------+<-------+-----------------+
> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
> + *+-----------------+ +-->+------------------+<-------+-----------------+
> + *| BAR2 | Local Memory | BAR2 |
> + *+-----------------+ +-----------------+
> + *| BAR3 | | BAR3 |
> + *+-----------------+ +-----------------+
> + *| BAR4 | | BAR4 |
> + *+-----------------+ +-----------------+
> + *| BAR5 | | BAR5 |
> + *+-----------------+ +-----------------+
> + * EP CONTROLLER 1 EP CONTROLLER 2
> + *
> + * This function allocates the Local Memory mentioned in the above diagram.
> + * The size of CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of
> + * SCRATCHPAD REGION is obtained from "spad-count" device tree property.
s/This function allocates/Allocate/
> + *
> + * The size of both config region and scratchpad region has to be aligned,
> + * since the scratchpad region will also be mapped as PEER SCRATCHPAD of
> + * other host using a separate BAR.
> + */
> +static int
> +epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + const struct pci_epc_features *peer_epc_features, *epc_features;
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + size_t msix_table_size, pba_size, align;
> + enum pci_barno peer_barno, barno;
> + struct epf_ntb_ctrl *ctrl;
> + u32 spad_size, ctrl_size;
> + u64 size, peer_size;
> + struct pci_epc *epc;
> + struct pci_epf *epf;
> + struct device *dev;
> + bool msix_capable;
> + u32 spad_count;
> + void *base;
> +
> + epf = ntb->epf;
> + dev = &epf->dev;
> + ntb_epc = ntb->epc[type];
> + epc = ntb_epc->epc;
> +
> + epc_features = ntb_epc->epc_features;
> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
> + size = epc_features->bar_fixed_size[barno];
> + align = epc_features->align;
> +
> + peer_ntb_epc = ntb->epc[!type];
> + peer_epc_features = peer_ntb_epc->epc_features;
> + peer_barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
> + peer_size = peer_epc_features->bar_fixed_size[barno];
> +
> + /* Check if epc_features is populated incorrectly */
> + if ((!IS_ALIGNED(size, align)))
> + return -EINVAL;
> +
> + spad_count = ntb->spad_count;
> +
> + ctrl_size = sizeof(struct epf_ntb_ctrl);
> + spad_size = spad_count * 4;
> +
> + msix_capable = epc_features->msix_capable;
> + if (msix_capable) {
> + msix_table_size = PCI_MSIX_ENTRY_SIZE * ntb->db_count;
> + ctrl_size = ALIGN(ctrl_size, 8);
> + ntb_epc->msix_table_offset = ctrl_size;
> + ntb_epc->msix_bar = barno;
> + /* Align to QWORD or 8 Bytes */
> + pba_size = ALIGN(DIV_ROUND_UP(ntb->db_count, 8), 8);
> + ctrl_size = ctrl_size + msix_table_size + pba_size;
> + }
> +
> + if (!align) {
> + ctrl_size = roundup_pow_of_two(ctrl_size);
> + spad_size = roundup_pow_of_two(spad_size);
> + } else {
> + ctrl_size = ALIGN(ctrl_size, align);
> + spad_size = ALIGN(spad_size, align);
> + }
> +
> + if (peer_size) {
> + if (peer_size < spad_size)
> + spad_count = peer_size / 4;
> + spad_size = peer_size;
> + }
> +
> + /*
> + * In order to make sure SPAD offset is aligned to its size,
> + * expand control region size to the size of SPAD if SPAD size
> + * is greater than control region size.
> + */
> + if (spad_size > ctrl_size)
> + ctrl_size = spad_size;
> +
> + if (!size)
> + size = ctrl_size + spad_size;
> + else if (size < ctrl_size + spad_size)
> + return -EINVAL;
> +
> + base = pci_epf_alloc_space(epf, size, barno, align, type);
> + if (!base) {
> + dev_err(dev, "%s intf: Config/Status/SPAD alloc region fail\n",
> + pci_epc_interface_string(type));
> + return -ENOMEM;
> + }
> +
> + ntb_epc->reg = base;
> +
> + ctrl = ntb_epc->reg;
> + ctrl->spad_offset = ctrl_size;
> + ctrl->spad_count = spad_count;
> + ctrl->num_mws = ntb->num_mws;
> + ctrl->db_entry_size = align ? align : 4;
> + ntb_epc->spad_size = spad_size;
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_config_spad_bar_alloc_interface() - Allocate memory for config +
> + * scratchpad region for each of PRIMARY and SECONDARY interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Wrapper for epf_ntb_config_spad_bar_alloc() which allocates memory for
> + * config + scratchpad region for a specific interface
> + */
> +static int epf_ntb_config_spad_bar_alloc_interface(struct epf_ntb *ntb)
> +{
> + enum pci_epc_interface_type type;
> + struct device *dev;
> + int ret;
> +
> + dev = &ntb->epf->dev;
> +
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
> + ret = epf_ntb_config_spad_bar_alloc(ntb, type);
> + if (ret) {
> + dev_err(dev, "%s intf: Config/SPAD BAR alloc failed\n",
> + pci_epc_interface_string(type));
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_free_peer_mem() - Free's memory allocated in peers outbound address
s/Free's/Free/
> + * space
> + * @ntb_epc: EPC associated with one of the HOST which holds peers outbound
> + * address regions
> + *
> + *+-----------------+ +----->+----------------+-----------+-----------------+
> + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
> + *+-----------------+ | +----------------+ +-----------------+
> + *| BAR1 | | | Doorbell 2 +---------+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+
> + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
> + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+
> + *+-----------------+ | |----------------+ | | | |
> + *| BAR4 | | | | | | +-----------------+
> + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
> + *| BAR5 | | | | | | +-----------------+
> + *+-----------------+ +----->-----------------+ | | | |
> + * EP CONTROLLER 1 | | | | +-----------------+
> + * | | | +---->+ MSI|X ADDRESS 4 |
> + * +----------------+ | +-----------------+
> + * (A) EP CONTROLLER 2 | | |
> + * (OB SPACE) | | |
> + * +-------> MW1 |
> + * | |
> + * | |
> + * (B) +-----------------+
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * +-----------------+
> + * PCI Address Space
> + * (Managed by HOST2)
> + *
> + * This function frees memory allocated in EP CONTROLLER 2 (OB SPACE) in the
s/This function frees/Free/
> + * above diagram. It'll free Doorbell 1, Doorbell 2, Doorbell 3, Doorbell 4,
> + * MW1 (and MW2, MW3, MW4).
> + */
> +static void epf_ntb_free_peer_mem(struct epf_ntb_epc *ntb_epc)
> +{
> + struct pci_epf_bar *epf_bar;
> + void __iomem *mw_addr;
> + phys_addr_t phys_addr;
> + enum epf_ntb_bar bar;
> + enum pci_barno barno;
> + struct pci_epc *epc;
> + size_t size;
> +
> + epc = ntb_epc->epc;
> +
> + for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) {
> + barno = ntb_epc->epf_ntb_bar[bar];
> + mw_addr = ntb_epc->mw_addr[barno];
> + epf_bar = &ntb_epc->epf_bar[barno];
> + phys_addr = epf_bar->phys_addr;
> + size = epf_bar->size;
> + if (mw_addr) {
> + pci_epc_mem_free_addr(epc, phys_addr, mw_addr, size);
> + ntb_epc->mw_addr[barno] = NULL;
> + }
> + }
> +}
> +
> +/**
> + * epf_ntb_db_mw_bar_clear() - Clears doorbell and memory BAR
s/Clears/Clear/
> + * @ntb_epc: EPC associated with one of the HOST which holds peers outbound
s/peers/peer's/
> + * address
> + *
> + *+-----------------+ +----->+----------------+-----------+-----------------+
> + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
> + *+-----------------+ | +----------------+ +-----------------+
> + *| BAR1 | | | Doorbell 2 +---------+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+
> + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
> + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+
> + *+-----------------+ | |----------------+ | | | |
> + *| BAR4 | | | | | | +-----------------+
> + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
> + *| BAR5 | | | | | | +-----------------+
> + *+-----------------+ +----->-----------------+ | | | |
> + * EP CONTROLLER 1 | | | | +-----------------+
> + * | | | +---->+ MSI|X ADDRESS 4 |
> + * +----------------+ | +-----------------+
> + * (A) EP CONTROLLER 2 | | |
> + * (OB SPACE) | | |
> + * +-------> MW1 |
> + * | |
> + * | |
> + * (B) +-----------------+
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * +-----------------+
> + * PCI Address Space
> + * (Managed by HOST2)
> + *
> + * This function clears doorbell and memory BARs (remove inbound ATU
> + * configuration). In the above diagram it clears BAR2 TO BAR5 of EP
> + * CONTROLLER 1 (Doorbell BAR, MW1 BAR, MW2 BAR, MW3 BAR and MW4 BAR).
s/This function clears/Clear/
> + */
> +static void epf_ntb_db_mw_bar_clear(struct epf_ntb_epc *ntb_epc)
> +{
> + struct pci_epf_bar *epf_bar;
> + enum epf_ntb_bar bar;
> + enum pci_barno barno;
> + struct pci_epc *epc;
> + u8 func_no;
> +
> + epc = ntb_epc->epc;
> +
> + func_no = ntb_epc->func_no;
> +
> + for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) {
> + barno = ntb_epc->epf_ntb_bar[bar];
> + epf_bar = &ntb_epc->epf_bar[barno];
> + pci_epc_clear_bar(epc, func_no, epf_bar);
> + }
> +}
> +
> +/**
> + * epf_ntb_db_mw_bar_cleanup() - Clears doorbell/memory BAR and free memory
> + * allocated in peers outbound address space
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * This function is a wrapper for epf_ntb_db_mw_bar_clear() which clears
> + * HOST1's BAR and epf_ntb_free_peer_mem() which frees up HOST2 outbound
> + * memory.
Ditto.
> + */
> +static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> +
> + ntb_epc = ntb->epc[type];
> + peer_ntb_epc = ntb->epc[!type];
> +
> + epf_ntb_db_mw_bar_clear(ntb_epc);
> + epf_ntb_free_peer_mem(peer_ntb_epc);
> +}
> +
> +/**
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Configures MSI/MSI-X capability for each interface with number of
> + * interrupts equal to "db-count" device tree parameter.
Ditto.
> + */
> +static int epf_ntb_configure_interrupt(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + const struct pci_epc_features *epc_features;
> + bool msix_capable, msi_capable;
> + struct epf_ntb_epc *ntb_epc;
> + struct pci_epc *epc;
> + struct device *dev;
> + u32 db_count;
> + u8 func_no;
> + int ret;
> +
> + ntb_epc = ntb->epc[type];
> + dev = &ntb->epf->dev;
> +
> + epc_features = ntb_epc->epc_features;
> + msix_capable = epc_features->msix_capable;
> + msi_capable = epc_features->msi_capable;
> +
> + if (!(msix_capable || msi_capable)) {
> + dev_err(dev, "MSI or MSI-X is required for doorbell\n");
> + return -EINVAL;
> + }
> +
> + func_no = ntb_epc->func_no;
> +
> + db_count = ntb->db_count;
> + if (db_count > MAX_DB_COUNT) {
> + dev_err(dev, "DB count cannot be more than %d\n", MAX_DB_COUNT);
> + return -EINVAL;
> + }
> +
> + ntb->db_count = db_count;
> + epc = ntb_epc->epc;
> +
> + if (msi_capable) {
> + ret = pci_epc_set_msi(epc, func_no, db_count);
> + if (ret) {
> + dev_err(dev, "%s intf: MSI configuration failed\n",
> + pci_epc_interface_string(type));
> + return ret;
> + }
> + }
> +
> + if (msix_capable) {
> + ret = pci_epc_set_msix(epc, func_no, db_count,
> + ntb_epc->msix_bar,
> + ntb_epc->msix_table_offset);
> + if (ret) {
> + dev_err(dev, "MSI configuration failed\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_alloc_peer_mem() - Allocate memory in peers outbound address space
s/peers/peer's/
> + * @ntb_epc: EPC associated with one of the HOST whose BAR holds peers outbound
Ditto.
> + * address
> + * @bar: BAR of @ntb_epc in for which memory has to be allocated (could be
> + * BAR_DB_MW1, BAR_MW2, BAR_MW3, BAR_MW4)
> + * @peer_ntb_epc: EPC associated with HOST whose outbound address space is
> + * used by @ntb_epc
> + * @size: Size of the address region that has to be allocated in peers OB SPACE
> + *
> + *
> + *+-----------------+ +----->+----------------+-----------+-----------------+
> + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
> + *+-----------------+ | +----------------+ +-----------------+
> + *| BAR1 | | | Doorbell 2 +---------+ | |
> + *+-----------------+----+ +----------------+ | | |
> + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+
> + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
> + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+
> + *+-----------------+ | |----------------+ | | | |
> + *| BAR4 | | | | | | +-----------------+
> + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
> + *| BAR5 | | | | | | +-----------------+
> + *+-----------------+ +----->-----------------+ | | | |
> + * EP CONTROLLER 1 | | | | +-----------------+
> + * | | | +---->+ MSI|X ADDRESS 4 |
> + * +----------------+ | +-----------------+
> + * (A) EP CONTROLLER 2 | | |
> + * (OB SPACE) | | |
> + * +-------> MW1 |
> + * | |
> + * | |
> + * (B) +-----------------+
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * +-----------------+
> + * PCI Address Space
> + * (Managed by HOST2)
> + *
> + * This function allocates memory in OB space of EP CONTROLLER 2 in the
> + * above diagram. It'll allocate for Doorbell 1, Doorbell 2, Doorbell 3,
> + * Doorbell 4, MW1 (and MW2, MW3, MW4).
Ditto.
> + */
> +static int
> +epf_ntb_alloc_peer_mem(struct device *dev, struct epf_ntb_epc *ntb_epc,
> + enum epf_ntb_bar bar, struct epf_ntb_epc *peer_ntb_epc,
> + size_t size)
> +{
> + const struct pci_epc_features *epc_features;
> + struct pci_epf_bar *epf_bar;
> + struct pci_epc *peer_epc;
> + phys_addr_t phys_addr;
> + void __iomem *mw_addr;
> + enum pci_barno barno;
> + size_t align;
> +
> + epc_features = ntb_epc->epc_features;
> + align = epc_features->align;
> +
> + if (size < 128)
> + size = 128;
> +
> + if (align)
> + size = ALIGN(size, align);
> + else
> + size = roundup_pow_of_two(size);
> +
> + peer_epc = peer_ntb_epc->epc;
> + mw_addr = pci_epc_mem_alloc_addr(peer_epc, &phys_addr, size);
> + if (!mw_addr) {
> + dev_err(dev, "%s intf: Failed to allocate OB address\n",
> + pci_epc_interface_string(peer_ntb_epc->type));
> + return -ENOMEM;
> + }
> +
> + barno = ntb_epc->epf_ntb_bar[bar];
> + epf_bar = &ntb_epc->epf_bar[barno];
> + ntb_epc->mw_addr[barno] = mw_addr;
> +
> + epf_bar->phys_addr = phys_addr;
> + epf_bar->size = size;
> + epf_bar->barno = barno;
> + epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32;
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_db_mw_bar_init() - Configure Doorbell and Memory window BARs
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Wrapper for epf_ntb_alloc_peer_mem() and pci_epc_set_bar() that allocates
> + * memory in OB address space of HOST2 and configures BAR of HOST1
> + */
> +static int epf_ntb_db_mw_bar_init(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + const struct pci_epc_features *epc_features;
> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
> + struct pci_epf_bar *epf_bar;
> + struct epf_ntb_ctrl *ctrl;
> + u32 num_mws, db_count;
> + enum epf_ntb_bar bar;
> + enum pci_barno barno;
> + struct pci_epc *epc;
> + struct device *dev;
> + size_t align;
> + int ret, i;
> + u8 func_no;
> + u64 size;
> +
> + ntb_epc = ntb->epc[type];
> + peer_ntb_epc = ntb->epc[!type];
> +
> + dev = &ntb->epf->dev;
> + epc_features = ntb_epc->epc_features;
> + align = epc_features->align;
> + func_no = ntb_epc->func_no;
> + epc = ntb_epc->epc;
> + num_mws = ntb->num_mws;
> + db_count = ntb->db_count;
> +
> + for (bar = BAR_DB_MW1, i = 0; i < num_mws; bar++, i++) {
> + if (bar == BAR_DB_MW1) {
> + align = align ? align : 4;
> + size = db_count * align;
> + size = ALIGN(size, ntb->mws_size[i]);
> + ctrl = ntb_epc->reg;
> + ctrl->mw1_offset = size;
> + size += ntb->mws_size[i];
> + } else {
> + size = ntb->mws_size[i];
> + }
> +
> + ret = epf_ntb_alloc_peer_mem(dev, ntb_epc, bar,
> + peer_ntb_epc, size);
> + if (ret)
> + goto err_alloc_peer_mem;
> +
> + barno = ntb_epc->epf_ntb_bar[bar];
> + epf_bar = &ntb_epc->epf_bar[barno];
> +
> + ret = pci_epc_set_bar(epc, func_no, epf_bar);
> + if (ret) {
> + dev_err(dev, "%s intf: DoorBell BAR set failed\n",
> + pci_epc_interface_string(type));
> + goto err_alloc_peer_mem;
> + }
> + }
> +
> + return 0;
> +
> +err_alloc_peer_mem:
> + epf_ntb_db_mw_bar_cleanup(ntb, type);
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_epc_destroy_interface() - Cleanup NTB EPC interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Unbind NTB function device from EPC and Relinquish reference to pci_epc
> + * for each of the interface.
s/Relinquish/relinquish/
> + */
> +static void epf_ntb_epc_destroy_interface(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + struct epf_ntb_epc *ntb_epc;
> + struct pci_epc *epc;
> + struct pci_epf *epf;
> +
> + if (type < 0)
> + return;
> +
> + epf = ntb->epf;
> + ntb_epc = ntb->epc[type];
> + if (!ntb_epc)
> + return;
> + epc = ntb_epc->epc;
> + pci_epc_remove_epf(epc, epf, type);
> + pci_epc_put(epc);
> +}
> +
> +/**
> + * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
> + */
> +static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
> +{
> + enum pci_epc_interface_type type;
> +
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++)
> + epf_ntb_epc_destroy_interface(ntb, type);
> +}
> +
> +/**
> + * epf_ntb_epc_create_interface() - Create and initialize NTB EPC interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @epc: struct pci_epc to which a particular NTB interface should be associated
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Allocate memory for NTB EPC interface and initialize it.
> + */
> +static int
> +epf_ntb_epc_create_interface(struct epf_ntb *ntb, struct pci_epc *epc,
> + enum pci_epc_interface_type type)
> +{
> + const struct pci_epc_features *epc_features;
> + struct pci_epf_bar *epf_bar;
> + struct epf_ntb_epc *ntb_epc;
> + struct pci_epf *epf;
> + struct device *dev;
> + u8 func_no;
> +
> + dev = &ntb->epf->dev;
> +
> + ntb_epc = devm_kzalloc(dev, sizeof(*ntb_epc), GFP_KERNEL);
> + if (!ntb_epc)
> + return -ENOMEM;
> +
> + epf = ntb->epf;
> + if (type == PRIMARY_INTERFACE) {
> + func_no = epf->func_no;
> + epf_bar = epf->bar;
> + } else {
> + func_no = epf->sec_epc_func_no;
> + epf_bar = epf->sec_epc_bar;
> + }
> +
> + ntb_epc->linkup = false;
> + ntb_epc->epc = epc;
> + ntb_epc->func_no = func_no;
> + ntb_epc->type = type;
> + ntb_epc->epf_bar = epf_bar;
> + ntb_epc->epf_ntb = ntb;
> +
> + epc_features = pci_epc_get_features(epc, func_no);
> + if (!epc_features)
> + return -EINVAL;
> + ntb_epc->epc_features = epc_features;
> +
> + ntb->epc[type] = ntb_epc;
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_epc_create() - Create and initialize NTB EPC interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Get a reference to EPC device and bind NTB function device to that EPC
> + * for each of the interface. It is also a wrapper to
> + * epf_ntb_epc_create_interface() to allocate memory for NTB EPC interface
> + * and initialize it
> + */
> +static int epf_ntb_epc_create(struct epf_ntb *ntb)
> +{
> + struct pci_epf *epf;
> + struct device *dev;
> + int ret;
> +
> + epf = ntb->epf;
> + dev = &epf->dev;
> +
> + ret = epf_ntb_epc_create_interface(ntb, epf->epc, PRIMARY_INTERFACE);
> + if (ret) {
> + dev_err(dev, "PRIMARY intf: Fail to create NTB EPC\n");
> + return ret;
> + }
> +
> + ret = epf_ntb_epc_create_interface(ntb, epf->sec_epc,
> + SECONDARY_INTERFACE);
> + if (ret) {
> + dev_err(dev, "SECONDARY intf: Fail to create NTB EPC\n");
> + goto err_epc_create;
> + }
> +
> + return 0;
> +
> +err_epc_create:
> + epf_ntb_epc_destroy_interface(ntb, PRIMARY_INTERFACE);
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_init_epc_bar_interface() - Identify BARs to be used for each of
> + * the NTB constructs (scratchpad region, doorbell, memorywindow)
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Identify the free BAR's to be used for each of BAR_CONFIG, BAR_PEER_SPAD,
> + * BAR_DB_MW1, BAR_MW2, BAR_MW3 and BAR_MW4.
s/BAR's/BARs/
> + */
> +static int epf_ntb_init_epc_bar_interface(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + const struct pci_epc_features *epc_features;
> + struct epf_ntb_epc *ntb_epc;
> + enum pci_barno barno;
> + enum epf_ntb_bar bar;
> + struct device *dev;
> + u32 num_mws;
> + int i;
> +
> + barno = BAR_0;
> + ntb_epc = ntb->epc[type];
> + num_mws = ntb->num_mws;
> + dev = &ntb->epf->dev;
> + epc_features = ntb_epc->epc_features;
> +
> + /* These are required BARs which are mandatory for NTB functionality */
> + for (bar = BAR_CONFIG; bar <= BAR_DB_MW1; bar++, barno++) {
> + barno = pci_epc_get_next_free_bar(epc_features, barno);
> + if (barno < 0) {
> + dev_err(dev, "%s intf: Fail to get NTB function BAR\n",
> + pci_epc_interface_string(type));
> + return barno;
> + }
> + ntb_epc->epf_ntb_bar[bar] = barno;
> + }
> +
> + /* These are optional BARs which doesn't impact NTB functionality */
s/doesn't/don't/
> + for (bar = BAR_MW2, i = 1; i < num_mws; bar++, barno++, i++) {
> + barno = pci_epc_get_next_free_bar(epc_features, barno);
> + if (barno < 0) {
> + ntb->num_mws = i;
> + dev_dbg(dev, "BAR not available for > MW%d\n", i + 1);
> + }
> + ntb_epc->epf_ntb_bar[bar] = barno;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
> + * constructs (scratchpad region, doorbell, memorywindow)
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Wrapper to epf_ntb_init_epc_bar_interface() to identify the free BAR's
> + * to be used for each of BAR_CONFIG, BAR_PEER_SPAD, BAR_DB_MW1, BAR_MW2,
> + * BAR_MW3 and BAR_MW4 for all the interfaces.
s/BAR's/BARs/
> + */
> +static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
> +{
> + enum pci_epc_interface_type type;
> + struct device *dev;
> + int ret;
> +
> + dev = &ntb->epf->dev;
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
> + ret = epf_ntb_init_epc_bar_interface(ntb, type);
> + if (ret) {
> + dev_err(dev, "Fail to init EPC bar for %s interface\n",
> + pci_epc_interface_string(type));
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_epc_init_interface() - Initialize NTB interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Wrapper to initialize a particular EPC interface and start the workqueue
> + * to check for commands from host. This function will write to the
> + * EP controller HW for configuring it.
> + */
> +static int epf_ntb_epc_init_interface(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + struct epf_ntb_epc *ntb_epc;
> + struct pci_epc *epc;
> + struct pci_epf *epf;
> + struct device *dev;
> + u8 func_no;
> + int ret;
> +
> + ntb_epc = ntb->epc[type];
> + epf = ntb->epf;
> + dev = &epf->dev;
> + epc = ntb_epc->epc;
> + func_no = ntb_epc->func_no;
> +
> + ret = epf_ntb_config_sspad_bar_set(ntb->epc[type]);
> + if (ret) {
> + dev_err(dev, "%s intf: Config/self SPAD BAR init failed\n",
> + pci_epc_interface_string(type));
> + return ret;
> + }
> +
> + ret = epf_ntb_peer_spad_bar_set(ntb, type);
> + if (ret) {
> + dev_err(dev, "%s intf: Peer SPAD BAR init failed\n",
> + pci_epc_interface_string(type));
> + goto err_peer_spad_bar_init;
> + }
> +
> + ret = epf_ntb_configure_interrupt(ntb, type);
> + if (ret) {
> + dev_err(dev, "%s intf: Interrupt configuration failed\n",
> + pci_epc_interface_string(type));
> + goto err_peer_spad_bar_init;
> + }
> +
> + ret = epf_ntb_db_mw_bar_init(ntb, type);
> + if (ret) {
> + dev_err(dev, "%s intf: DB/MW BAR init failed\n",
> + pci_epc_interface_string(type));
> + goto err_db_mw_bar_init;
> + }
> +
> + ret = pci_epc_write_header(epc, func_no, epf->header);
> + if (ret) {
> + dev_err(dev, "%s intf: Configuration header write failed\n",
> + pci_epc_interface_string(type));
> + goto err_write_header;
> + }
> +
> + INIT_DELAYED_WORK(&ntb->epc[type]->cmd_handler, epf_ntb_cmd_handler);
> + queue_work(kpcintb_workqueue, &ntb->epc[type]->cmd_handler.work);
> +
> + return 0;
> +
> +err_write_header:
> + epf_ntb_db_mw_bar_cleanup(ntb, type);
> +
> +err_db_mw_bar_init:
> + epf_ntb_peer_spad_bar_clear(ntb->epc[type]);
> +
> +err_peer_spad_bar_init:
> + epf_ntb_config_sspad_bar_clear(ntb->epc[type]);
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_epc_cleanup_interface() - Cleanup NTB interface
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + * @type: PRIMARY interface or SECONDARY interface
> + *
> + * Wrapper to cleanup a particular NTB interface.
> + */
> +static void epf_ntb_epc_cleanup_interface(struct epf_ntb *ntb,
> + enum pci_epc_interface_type type)
> +{
> + struct epf_ntb_epc *ntb_epc;
> +
> + if (type < 0)
> + return;
> +
> + ntb_epc = ntb->epc[type];
> + cancel_delayed_work(&ntb_epc->cmd_handler);
> + epf_ntb_db_mw_bar_cleanup(ntb, type);
> + epf_ntb_peer_spad_bar_clear(ntb_epc);
> + epf_ntb_config_sspad_bar_clear(ntb_epc);
> +}
> +
> +/**
> + * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Wrapper to cleanup all NTB interfaces.
> + */
> +static void epf_ntb_epc_cleanup(struct epf_ntb *ntb)
> +{
> + enum pci_epc_interface_type type;
> +
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++)
> + epf_ntb_epc_cleanup_interface(ntb, type);
> +}
> +
> +/**
> + * epf_ntb_epc_init() - Initialize all NTB interfaces
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Wrapper to initialize all NTB interface and start the workqueue
> + * to check for commands from host.
> + */
> +static int epf_ntb_epc_init(struct epf_ntb *ntb)
> +{
> + enum pci_epc_interface_type type;
> + struct device *dev;
> + int ret;
> +
> + dev = &ntb->epf->dev;
> +
> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
> + ret = epf_ntb_epc_init_interface(ntb, type);
> + if (ret) {
> + dev_err(dev, "%s intf: Failed to initialize\n",
> + pci_epc_interface_string(type));
> + goto err_init_type;
> + }
> + }
> +
> + return 0;
> +
> +err_init_type:
> + epf_ntb_epc_cleanup_interface(ntb, type - 1);
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_bind() - Invoked when a EPC is bound to NTB EPF device
Should say what this function does, not when it is invoked.
> + * @epf: NTB endpoint function device
> + *
> + * This is invoked when a primary interface or secondary interface is
> + * bound to EPC device. This function will complete only when EPC is bound
> + * to both the interfaces. This initializes both the endpoint controllers
> + * associated with NTB function device.
> + */
> +static int epf_ntb_bind(struct pci_epf *epf)
> +{
> + struct epf_ntb *ntb = epf_get_drvdata(epf);
> + struct device *dev = &epf->dev;
> + int ret;
> +
> + if (!epf->epc) {
> + dev_dbg(dev, "PRIMARY EPC interface not yet bound\n");
> + return 0;
> + }
> +
> + if (!epf->sec_epc) {
> + dev_dbg(dev, "SECONDARY EPC interface not yet bound\n");
> + return 0;
> + }
> +
> + ret = epf_ntb_epc_create(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to create NTB EPC\n");
> + return ret;
> + }
> +
> + ret = epf_ntb_init_epc_bar(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to create NTB EPC\n");
> + goto err_bar_init;
> + }
> +
> + ret = epf_ntb_config_spad_bar_alloc_interface(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to allocate BAR memory\n");
> + goto err_bar_alloc;
> + }
> +
> + ret = epf_ntb_epc_init(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to initialize EPC\n");
> + goto err_bar_alloc;
> + }
> +
> + epf_set_drvdata(epf, ntb);
> +
> + return 0;
> +
> +err_bar_alloc:
> + epf_ntb_config_spad_bar_free(ntb);
> +
> +err_bar_init:
> + epf_ntb_epc_destroy(ntb);
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_unbind() - Cleanup the initialization from epf_ntb_bind()
> + * @epf: NTB endpoint function device
> + *
> + * Cleanup the initialization from epf_ntb_bind()
> + */
> +static void epf_ntb_unbind(struct pci_epf *epf)
> +{
> + struct epf_ntb *ntb = epf_get_drvdata(epf);
> +
> + epf_ntb_epc_cleanup(ntb);
> + epf_ntb_config_spad_bar_free(ntb);
> + epf_ntb_epc_destroy(ntb);
> +}
> +
> +#define EPF_NTB_R(_name) \
> +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \
> + char *page) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + \
> + return sprintf(page, "%d\n", ntb->_name); \
> +}
> +
> +#define EPF_NTB_W(_name) \
> +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \
> + const char *page, size_t len) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + u32 val; \
> + int ret; \
> + \
> + ret = kstrtou32(page, 0, &val); \
> + if (ret) \
> + return ret; \
> + \
> + ntb->_name = val; \
> + \
> + return len; \
> +}
> +
> +#define EPF_NTB_MW_R(_name) \
> +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \
> + char *page) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + int win_no; \
> + \
> + sscanf(#_name, "mw%d", &win_no); \
> + \
> + return sprintf(page, "%lld\n", ntb->mws_size[win_no - 1]); \
> +}
> +
> +#define EPF_NTB_MW_W(_name) \
> +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \
> + const char *page, size_t len) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + struct device *dev = &ntb->epf->dev; \
> + int win_no; \
> + u64 val; \
> + int ret; \
> + \
> + ret = kstrtou64(page, 0, &val); \
> + if (ret) \
> + return ret; \
> + \
> + if (sscanf(#_name, "mw%d", &win_no) != 1) \
> + return -EINVAL; \
> + \
> + if (ntb->num_mws < win_no) { \
> + dev_err(dev, "Invalid num_nws: %d value\n", ntb->num_mws); \
> + return -EINVAL; \
> + } \
> + \
> + ntb->mws_size[win_no - 1] = val; \
> + \
> + return len; \
> +}
> +
> +static ssize_t epf_ntb_num_mws_store(struct config_item *item,
> + const char *page, size_t len)
> +{
> + struct config_group *group = to_config_group(item);
> + struct epf_ntb *ntb = to_epf_ntb(group);
> + u32 val;
> + int ret;
> +
> + ret = kstrtou32(page, 0, &val);
> + if (ret)
> + return ret;
> +
> + if (val > MAX_MW)
> + return -EINVAL;
> +
> + ntb->num_mws = val;
> +
> + return len;
> +}
> +
> +EPF_NTB_R(spad_count)
> +EPF_NTB_W(spad_count)
> +EPF_NTB_R(db_count)
> +EPF_NTB_W(db_count)
> +EPF_NTB_R(num_mws)
> +EPF_NTB_MW_R(mw1)
> +EPF_NTB_MW_W(mw1)
> +EPF_NTB_MW_R(mw2)
> +EPF_NTB_MW_W(mw2)
> +EPF_NTB_MW_R(mw3)
> +EPF_NTB_MW_W(mw3)
> +EPF_NTB_MW_R(mw4)
> +EPF_NTB_MW_W(mw4)
> +
> +CONFIGFS_ATTR(epf_ntb_, spad_count);
> +CONFIGFS_ATTR(epf_ntb_, db_count);
> +CONFIGFS_ATTR(epf_ntb_, num_mws);
> +CONFIGFS_ATTR(epf_ntb_, mw1);
> +CONFIGFS_ATTR(epf_ntb_, mw2);
> +CONFIGFS_ATTR(epf_ntb_, mw3);
> +CONFIGFS_ATTR(epf_ntb_, mw4);
> +
> +static struct configfs_attribute *epf_ntb_attrs[] = {
> + &epf_ntb_attr_spad_count,
> + &epf_ntb_attr_db_count,
> + &epf_ntb_attr_num_mws,
> + &epf_ntb_attr_mw1,
> + &epf_ntb_attr_mw2,
> + &epf_ntb_attr_mw3,
> + &epf_ntb_attr_mw4,
> + NULL,
> +};
> +
> +static const struct config_item_type ntb_group_type = {
> + .ct_attrs = epf_ntb_attrs,
> + .ct_owner = THIS_MODULE,
> +};
> +
> +/**
> + * epf_ntb_add_cfs() - Add configfs directory specific to NTB
> + * @epf: NTB endpoint function device
> + *
> + * Add configfs directory specific to NTB. This directory will hold
> + * NTB specific properties like db_count, spad_count, num_mws etc.,
> + */
> +static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
> + struct config_group *group)
> +{
> + struct epf_ntb *ntb = epf_get_drvdata(epf);
> + struct config_group *ntb_group = &ntb->group;
> + struct device *dev = &epf->dev;
> +
> + config_group_init_type_name(ntb_group, dev_name(dev), &ntb_group_type);
> +
> + return ntb_group;
> +}
> +
> +/**
> + * epf_ntb_probe() - Probe NTB function driver
> + * @epf: NTB endpoint function device
> + *
> + * Probe NTB function driver when endpoint function bus detects a NTB
> + * endpoint function.
> + */
> +static int epf_ntb_probe(struct pci_epf *epf)
> +{
> + struct epf_ntb *ntb;
> + struct device *dev;
> +
> + dev = &epf->dev;
> +
> + ntb = devm_kzalloc(dev, sizeof(*ntb), GFP_KERNEL);
> + if (!ntb)
> + return -ENOMEM;
> +
> + epf->header = &epf_ntb_header;
> + ntb->epf = epf;
> + epf_set_drvdata(epf, ntb);
> +
> + return 0;
> +}
> +
> +static struct pci_epf_ops epf_ntb_ops = {
> + .bind = epf_ntb_bind,
> + .unbind = epf_ntb_unbind,
> + .add_cfs = epf_ntb_add_cfs,
> +};
> +
> +static const struct pci_epf_device_id epf_ntb_ids[] = {
> + {
> + .name = "pci_epf_ntb",
> + },
> + {},
> +};
> +
> +static struct pci_epf_driver epf_ntb_driver = {
> + .driver.name = "pci_epf_ntb",
> + .probe = epf_ntb_probe,
> + .id_table = epf_ntb_ids,
> + .ops = &epf_ntb_ops,
> + .owner = THIS_MODULE,
> +};
> +
> +static int __init epf_ntb_init(void)
> +{
> + int ret;
> +
> + kpcintb_workqueue = alloc_workqueue("kpcintb", WQ_MEM_RECLAIM |
> + WQ_HIGHPRI, 0);
> + ret = pci_epf_register_driver(&epf_ntb_driver);
> + if (ret) {
> + pr_err("Failed to register pci epf ntb driver --> %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +module_init(epf_ntb_init);
> +
> +static void __exit epf_ntb_exit(void)
> +{
> + pci_epf_unregister_driver(&epf_ntb_driver);
> +}
> +module_exit(epf_ntb_exit);
> +
> +MODULE_DESCRIPTION("PCI EPF NTB DRIVER");
> +MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@...com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
>
Powered by blists - more mailing lists