linux-kernel - Re: [PATCH 2/2] interconnect: qcom: Add SDX55 interconnect provider driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <2a5d4de5-1e92-3b58-0ad1-9dd472ed7a0b@linaro.org>
Date:   Wed, 20 Jan 2021 19:37:20 +0200
From:   Georgi Djakov <georgi.djakov@...aro.org>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc:     robh+dt@...nel.org, agross@...nel.org, bjorn.andersson@...aro.org,
        linux-arm-msm@...r.kernel.org, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        okukatla@...eaurora.org
Subject: Re: [PATCH 2/2] interconnect: qcom: Add SDX55 interconnect provider
 driver

Hi Mani,

On 1/20/21 18:37, Manivannan Sadhasivam wrote:
> Hi Georgi,
> 
> On Wed, Jan 20, 2021 at 04:59:31PM +0200, Georgi Djakov wrote:
>> Hi Mani,
>>
>> Thanks for the patch!
>>
>> On 1/20/21 10:06, Manivannan Sadhasivam wrote:
>>> Add driver for the Qualcomm interconnect buses found in SDX55 based
>>> platforms. The topology consists of several NoCs that are controlled by
>>> a remote processor that collects the aggregated bandwidth for each
>>> master-slave pairs.
>>>
>>> Based on SM8250 driver and generated from downstream dts.
>>>
>>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>>> ---
>>>    drivers/interconnect/qcom/Kconfig  |  10 +
>>>    drivers/interconnect/qcom/Makefile |   2 +
>>>    drivers/interconnect/qcom/sdx55.c  | 356 +++++++++++++++++++++++++++++
>>>    drivers/interconnect/qcom/sdx55.h  |  70 ++++++
>>>    4 files changed, 438 insertions(+)
>>>    create mode 100644 drivers/interconnect/qcom/sdx55.c
>>>    create mode 100644 drivers/interconnect/qcom/sdx55.h
>>>
>>> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
>>> index a8f93ba265f8..6df7e2161a0a 100644
>>> --- a/drivers/interconnect/qcom/Kconfig
>>> +++ b/drivers/interconnect/qcom/Kconfig
>>> @@ -65,6 +65,16 @@ config INTERCONNECT_QCOM_SDM845
>>>    	  This is a driver for the Qualcomm Network-on-Chip on sdm845-based
>>>    	  platforms.
>>> +config INTERCONNECT_QCOM_SDX55
>>> +	tristate "Qualcomm SDX55 interconnect driver"
>>> +	depends on INTERCONNECT_QCOM
>>> +	depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
>>
>> Why not use depends on INTERCONNECT_QCOM_RPMH_POSSIBLE?
>>
> 
> I just followed the same pattern as other RPMh based drivers. And I don't get
> what you are suggesting here! Can you please explain?

There are some recent changes here. Please check linux-next or v5.11-rc3+.

Thanks,
Georgi