| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Jan 2021 20:23:27 +0200
From: Cristian Ciocaltea <cristian.ciocaltea@...il.com>
To: Lee Jones <lee.jones@...aro.org>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Sebastian Reichel <sre@...nel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Andreas Färber <afaerber@...e.de>,
Linus Walleij <linus.walleij@...aro.org>,
linux-actions@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
linux-pm@...r.kernel.org, Rob Herring <robh@...nel.org>
Subject: [PATCH v6 2/7] dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding
Add devicetree binding for Actions Semi ATC260x PMICs.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...il.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
Changes in v6:
- None
Changes in v5:
- None
Changes in v4
- Added Reviewed-by from Rob
- Added support for ATC2603C LDO12 fixed regulator per Mark's suggestion
Changes in v3 (according to Rob's review):
- Dropped the 'pwrc' and 'onkey' nodes
- Used a common 'reset-time-sec' property
.../bindings/mfd/actions,atc260x.yaml | 183 ++++++++++++++++++
1 file changed, 183 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
new file mode 100644
index 000000000000..dd43a0c766f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi ATC260x Power Management IC bindings
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
+ - Cristian Ciocaltea <cristian.ciocaltea@...il.com>
+
+description: |
+ ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
+ and GPIO controller blocks. Currently only the PM related functionalities
+ (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
+ chip variants are supported.
+ ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
+ regulators and 1 fixed LDO regulator.
+ ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
+ regulators.
+
+allOf:
+ - $ref: ../input/input.yaml
+
+properties:
+ compatible:
+ enum:
+ - actions,atc2603c
+ - actions,atc2609a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-time-sec:
+ description: |
+ Duration in seconds which the key should be kept pressed for device
+ to reset automatically. The hardware default is 8. Use 0 to disable
+ this functionality.
+ enum: [0, 6, 8, 10, 12]
+
+ regulators:
+ type: object
+ description: |
+ List of child nodes specifying the regulators, depending on chip variant:
+ * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
+ * ATC2609A: dcdc[0-4], ldo[0-9]
+
+ properties:
+ compatible:
+ enum:
+ - actions,atc2603c-regulator
+ - actions,atc2609a-regulator
+
+ switchldo1:
+ type: object
+ $ref: ../regulator/regulator.yaml
+
+ properties:
+ regulator-name: true
+ regulator-boot-on: true
+ regulator-always-on: true
+ regulator-min-microvolt: true
+ regulator-max-microvolt: true
+ regulator-allow-bypass: true
+ regulator-active-discharge: true
+
+ additionalProperties: false
+
+ patternProperties:
+ "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
+ description: ATC260x voltage regulators supplies
+
+ "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
+ type: object
+ $ref: ../regulator/regulator.yaml
+
+ properties:
+ regulator-name: true
+ regulator-boot-on: true
+ regulator-always-on: true
+ regulator-min-microvolt: true
+ regulator-max-microvolt: true
+ regulator-allow-bypass: true
+
+ additionalProperties: false
+
+ allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: actions,atc2603c-regulator
+ then:
+ patternProperties:
+ "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
+
+ "^(ldo|dcdc)":
+ properties:
+ regulator-allow-bypass: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: actions,atc2609a-regulator
+ then:
+ patternProperties:
+ "^(ldo1[1-2]|switchldo1)(-supply)?$": false
+
+ "^(dcdc|ldo[3-9])":
+ properties:
+ regulator-allow-bypass: false
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@65 {
+ compatible = "actions,atc2603c";
+ reg = <0x65>;
+ interrupt-parent = <&sirq>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+ reset-time-sec = <6>;
+
+ regulators {
+ compatible = "actions,atc2603c-regulator";
+
+ dcdc1-supply = <®_5v0>;
+ dcdc3-supply = <®_5v0>;
+ ldo5-supply = <®_5v0>;
+ switchldo1-supply = <&vcc>;
+
+ vdd_cpu: dcdc1 {
+ regulator-name = "VDD_CPU";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ vcc: dcdc3 {
+ regulator-name = "VCC";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_3v1: ldo5 {
+ regulator-name = "VCC_3V1";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sd_vcc: switchldo1 {
+ regulator-name = "SD_VCC";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+...
--
2.30.0
Powered by blists - more mailing lists