[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210120214957.140232-1-hdegoede@redhat.com>
Date: Wed, 20 Jan 2021 22:49:52 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Lee Jones <lee.jones@...aro.org>,
Cezary Rojewski <cezary.rojewski@...el.com>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Liam Girdwood <liam.r.girdwood@...ux.intel.com>,
Jie Yang <yang.jie@...ux.intel.com>,
Mark Brown <broonie@...nel.org>
Cc: Hans de Goede <hdegoede@...hat.com>, patches@...nsource.cirrus.com,
linux-kernel@...r.kernel.org,
Andy Shevchenko <andy.shevchenko@...il.com>,
Charles Keepax <ckeepax@...nsource.cirrus.com>,
alsa-devel@...a-project.org
Subject: [PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec
Hi All,
Here is v4 of my series to add support for Intel Bay Trail based devices
which use a WM5102 codec for audio output/input.
This was developed and tested on a Lenovo Yoga Tablet 1051L.
The MFD and ASoC parts do not have any build-time dependencies
on each other. But the follow-up jack-detect series does have
patches depending on each-other and on this series. So IMHO it
would be best if this entire series would be merged through the
MFD tree to make merging the follow-up series easier.
Mark, if that is ok with you (and you are happy with the ASoC
changes) can you please Ack this ?
Changes in v4:
- Add a comment to the irq-flags override explaining that theoretically
DSDTs using IRQF_TRIGGER_FALLING could be correct on boards where the
IRQ controller does not support active low level interrupts
Changes in v3:
- Fix compilation error when CONFIG_ACPI is not set
Changes in v2:
- Split my WM5102 work into 2 series, one series adding basic support
for Bay Trail boards with a WM5102 codec and a second series with
the jack-detect work
- Various other minor code tweaks
Hans de Goede (4):
mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1")
mfd: arizona: Replace arizona_of_get_type() with
device_get_match_data()
mfd: arizona: Add support for ACPI enumeration of WM5102 connected
over SPI
ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()
Pierre-Louis Bossart (1):
ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102
drivers/mfd/arizona-core.c | 11 -
drivers/mfd/arizona-i2c.c | 11 +-
drivers/mfd/arizona-spi.c | 138 +++++-
drivers/mfd/arizona.h | 9 -
sound/soc/intel/boards/Kconfig | 12 +
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/bytcr_wm5102.c | 465 ++++++++++++++++++
.../intel/common/soc-acpi-intel-byt-match.c | 16 +
sound/soc/intel/common/soc-intel-quirks.h | 25 +
9 files changed, 661 insertions(+), 28 deletions(-)
create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c
Regards,
Hans
Powered by blists - more mailing lists