| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Jan 2021 12:54:51 +0800
From: Stanley Chu <stanley.chu@...iatek.com>
To: Can Guo <cang@...eaurora.org>
CC: <asutoshd@...eaurora.org>, <nguyenb@...eaurora.org>,
<hongwus@...eaurora.org>, <ziqichen@...eaurora.org>,
<linux-scsi@...r.kernel.org>, <kernel-team@...roid.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
"Avri Altman" <avri.altman@....com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Bean Huo <beanhuo@...ron.com>,
Adrian Hunter <adrian.hunter@...el.com>,
"Satya Tangirala" <satyat@...gle.com>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v10 1/3] scsi: ufs: Protect some contexts from
unexpected clock scaling
Hi Can,
On Tue, 2021-01-19 at 03:52 -0800, Can Guo wrote:
> In contexts like suspend, shutdown and error handling, we need to suspend
> devfreq to make sure these contexts won't be disturbed by clock scaling.
> However, suspending devfreq is not enough since users can still trigger a
> clock scaling by manipulating the devfreq sysfs nodes like min/max_freq and
> governor even after devfreq is suspended. Moreover, mere suspending devfreq
> cannot synchroinze a clock scaling which has already been invoked through
> these sysfs nodes. Add one more flag in struct clk_scaling and wrap the
> entire func ufshcd_devfreq_scale() with the clk_scaling_lock, so that we
> can use this flag and clk_scaling_lock to control and synchronize clock
> scaling invoked through devfreq sysfs nodes.
>
> Signed-off-by: Can Guo <cang@...eaurora.org>
> ---
> drivers/scsi/ufs/ufshcd.c | 83 +++++++++++++++++++++++++++++------------------
> drivers/scsi/ufs/ufshcd.h | 6 +++-
> 2 files changed, 56 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 53fd59c..ba62d84 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -1201,19 +1201,30 @@ static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba)
> */
> ufshcd_scsi_block_requests(hba);
> down_write(&hba->clk_scaling_lock);
> - if (ufshcd_wait_for_doorbell_clr(hba, DOORBELL_CLR_TOUT_US)) {
> +
> + if (!hba->clk_scaling.is_allowed ||
> + ufshcd_wait_for_doorbell_clr(hba, DOORBELL_CLR_TOUT_US)) {
> ret = -EBUSY;
> up_write(&hba->clk_scaling_lock);
> ufshcd_scsi_unblock_requests(hba);
> + goto out;
> }
>
> + /* let's not get into low power until clock scaling is completed */
> + ufshcd_hold(hba, false);
> +
> +out:
> return ret;
> }
>
> -static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba)
> +static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, bool writelock)
> {
> - up_write(&hba->clk_scaling_lock);
> + if (writelock)
> + up_write(&hba->clk_scaling_lock);
> + else
> + up_read(&hba->clk_scaling_lock);
> ufshcd_scsi_unblock_requests(hba);
> + ufshcd_release(hba);
> }
>
> /**
> @@ -1228,13 +1239,11 @@ static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba)
> static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
> {
> int ret = 0;
> -
> - /* let's not get into low power until clock scaling is completed */
> - ufshcd_hold(hba, false);
> + bool is_writelock = true;
>
> ret = ufshcd_clock_scaling_prepare(hba);
> if (ret)
> - goto out;
> + return ret;
>
> /* scale down the gear before scaling down clocks */
> if (!scale_up) {
> @@ -1260,14 +1269,12 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
> }
>
> /* Enable Write Booster if we have scaled up else disable it */
> - up_write(&hba->clk_scaling_lock);
> + downgrade_write(&hba->clk_scaling_lock);
> + is_writelock = false;
> ufshcd_wb_ctrl(hba, scale_up);
> - down_write(&hba->clk_scaling_lock);
>
> out_unprepare:
> - ufshcd_clock_scaling_unprepare(hba);
> -out:
> - ufshcd_release(hba);
> + ufshcd_clock_scaling_unprepare(hba, is_writelock);
> return ret;
> }
>
> @@ -1541,7 +1548,7 @@ static ssize_t ufshcd_clkscale_enable_show(struct device *dev,
> {
> struct ufs_hba *hba = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%d\n", hba->clk_scaling.is_allowed);
> + return snprintf(buf, PAGE_SIZE, "%d\n", hba->clk_scaling.is_enabled);
> }
>
> static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
> @@ -1555,7 +1562,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
> return -EINVAL;
>
> value = !!value;
> - if (value == hba->clk_scaling.is_allowed)
> + if (value == hba->clk_scaling.is_enabled)
> goto out;
>
> pm_runtime_get_sync(hba->dev);
> @@ -1564,7 +1571,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
> cancel_work_sync(&hba->clk_scaling.suspend_work);
> cancel_work_sync(&hba->clk_scaling.resume_work);
>
> - hba->clk_scaling.is_allowed = value;
> + hba->clk_scaling.is_enabled = value;
>
> if (value) {
> ufshcd_resume_clkscaling(hba);
> @@ -1902,8 +1909,6 @@ static void ufshcd_init_clk_scaling(struct ufs_hba *hba)
> snprintf(wq_name, sizeof(wq_name), "ufs_clkscaling_%d",
> hba->host->host_no);
> hba->clk_scaling.workq = create_singlethread_workqueue(wq_name);
> -
> - ufshcd_clkscaling_init_sysfs(hba);
> }
>
> static void ufshcd_exit_clk_scaling(struct ufs_hba *hba)
> @@ -1911,6 +1916,8 @@ static void ufshcd_exit_clk_scaling(struct ufs_hba *hba)
> if (!ufshcd_is_clkscaling_supported(hba))
> return;
>
> + if (hba->clk_scaling.enable_attr.attr.name)
> + device_remove_file(hba->dev, &hba->clk_scaling.enable_attr);
> destroy_workqueue(hba->clk_scaling.workq);
> ufshcd_devfreq_remove(hba);
> }
> @@ -1975,7 +1982,7 @@ static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba)
> if (!hba->clk_scaling.active_reqs++)
> queue_resume_work = true;
>
> - if (!hba->clk_scaling.is_allowed || hba->pm_op_in_progress)
> + if (!hba->clk_scaling.is_enabled || hba->pm_op_in_progress)
> return;
>
> if (queue_resume_work)
> @@ -5093,7 +5100,8 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
> update_scaling = true;
> }
> }
> - if (ufshcd_is_clkscaling_supported(hba) && update_scaling)
> + if (ufshcd_is_clkscaling_supported(hba) && update_scaling &&
> + hba->clk_scaling.active_reqs > 0)
Do we need to check hba->clk_scaling.active_reqs here?
if hba->clk_scaling.active_reqs is possibly decreased to negative value
here, then there may be something to be fixed?
Otherwise this patch looks good to me.
Thanks,
Stanley Chu
> hba->clk_scaling.active_reqs--;
> }
>
> @@ -5759,18 +5767,24 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
> ufshcd_vops_resume(hba, pm_op);
> } else {
> ufshcd_hold(hba, false);
> - if (hba->clk_scaling.is_allowed) {
> + if (hba->clk_scaling.is_enabled) {
> cancel_work_sync(&hba->clk_scaling.suspend_work);
> cancel_work_sync(&hba->clk_scaling.resume_work);
> ufshcd_suspend_clkscaling(hba);
> }
> + down_write(&hba->clk_scaling_lock);
> + hba->clk_scaling.is_allowed = false;
> + up_write(&hba->clk_scaling_lock);
> }
> }
>
> static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
> {
> ufshcd_release(hba);
> - if (hba->clk_scaling.is_allowed)
> + down_write(&hba->clk_scaling_lock);
> + hba->clk_scaling.is_allowed = true;
> + up_write(&hba->clk_scaling_lock);
> + if (hba->clk_scaling.is_enabled)
> ufshcd_resume_clkscaling(hba);
> pm_runtime_put(hba->dev);
> }
> @@ -7750,12 +7764,14 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
> sizeof(struct ufs_pa_layer_attr));
> hba->clk_scaling.saved_pwr_info.is_valid = true;
> if (!hba->devfreq) {
> + hba->clk_scaling.is_allowed = true;
> ret = ufshcd_devfreq_init(hba);
> if (ret)
> goto out;
> - }
>
> - hba->clk_scaling.is_allowed = true;
> + hba->clk_scaling.is_enabled = true;
> + ufshcd_clkscaling_init_sysfs(hba);
> + }
> }
>
> ufs_bsg_probe(hba);
> @@ -8672,11 +8688,14 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> ufshcd_hold(hba, false);
> hba->clk_gating.is_suspended = true;
>
> - if (hba->clk_scaling.is_allowed) {
> + if (hba->clk_scaling.is_enabled) {
> cancel_work_sync(&hba->clk_scaling.suspend_work);
> cancel_work_sync(&hba->clk_scaling.resume_work);
> ufshcd_suspend_clkscaling(hba);
> }
> + down_write(&hba->clk_scaling_lock);
> + hba->clk_scaling.is_allowed = false;
> + up_write(&hba->clk_scaling_lock);
>
> if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
> req_link_state == UIC_LINK_ACTIVE_STATE) {
> @@ -8773,8 +8792,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> goto out;
>
> set_link_active:
> - if (hba->clk_scaling.is_allowed)
> - ufshcd_resume_clkscaling(hba);
> ufshcd_vreg_set_hpm(hba);
> /*
> * Device hardware reset is required to exit DeepSleep. Also, for
> @@ -8798,7 +8815,10 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
> ufshcd_disable_auto_bkops(hba);
> enable_gating:
> - if (hba->clk_scaling.is_allowed)
> + down_write(&hba->clk_scaling_lock);
> + hba->clk_scaling.is_allowed = true;
> + up_write(&hba->clk_scaling_lock);
> + if (hba->clk_scaling.is_enabled)
> ufshcd_resume_clkscaling(hba);
> hba->clk_gating.is_suspended = false;
> hba->dev_info.b_rpm_dev_flush_capable = false;
> @@ -8901,7 +8921,10 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>
> hba->clk_gating.is_suspended = false;
>
> - if (hba->clk_scaling.is_allowed)
> + down_write(&hba->clk_scaling_lock);
> + hba->clk_scaling.is_allowed = true;
> + up_write(&hba->clk_scaling_lock);
> + if (hba->clk_scaling.is_enabled)
> ufshcd_resume_clkscaling(hba);
>
> /* Enable Auto-Hibernate if configured */
> @@ -8925,8 +8948,6 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> ufshcd_vreg_set_lpm(hba);
> disable_irq_and_vops_clks:
> ufshcd_disable_irq(hba);
> - if (hba->clk_scaling.is_allowed)
> - ufshcd_suspend_clkscaling(hba);
> ufshcd_setup_clocks(hba, false);
> if (ufshcd_is_clkgating_allowed(hba)) {
> hba->clk_gating.state = CLKS_OFF;
> @@ -9153,8 +9174,6 @@ void ufshcd_remove(struct ufs_hba *hba)
>
> ufshcd_exit_clk_scaling(hba);
> ufshcd_exit_clk_gating(hba);
> - if (ufshcd_is_clkscaling_supported(hba))
> - device_remove_file(hba->dev, &hba->clk_scaling.enable_attr);
> ufshcd_hba_exit(hba);
> }
> EXPORT_SYMBOL_GPL(ufshcd_remove);
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 85f9d0f..d553e46 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -419,7 +419,10 @@ struct ufs_saved_pwr_info {
> * @suspend_work: worker to suspend devfreq
> * @resume_work: worker to resume devfreq
> * @min_gear: lowest HS gear to scale down to
> - * @is_allowed: tracks if scaling is currently allowed or not
> + * @is_enabled: tracks if scaling is currently enabled or not, controlled by
> + clkscale_enable sysfs node
> + * @is_allowed: tracks if scaling is currently allowed or not, used to block
> + clock scaling which is not invoked from devfreq governor
> * @is_busy_started: tracks if busy period has started or not
> * @is_suspended: tracks if devfreq is suspended or not
> */
> @@ -434,6 +437,7 @@ struct ufs_clk_scaling {
> struct work_struct suspend_work;
> struct work_struct resume_work;
> u32 min_gear;
> + bool is_enabled;
> bool is_allowed;
> bool is_busy_started;
> bool is_suspended;
Powered by blists - more mailing lists