| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f89b9a32fa6ce939e4aef1136b80f8590083749d.camel@nxp.com>
Date: Wed, 20 Jan 2021 16:42:50 +0800
From: Liu Ying <victor.liu@....com>
To: Laurentiu Palcu <laurentiu.palcu@....nxp.com>
Cc: linux-arm-kernel@...ts.infradead.org,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, p.zabel@...gutronix.de,
airlied@...ux.ie, daniel@...ll.ch, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, robh+dt@...nel.org,
maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
tzimmermann@...e.de, guido.gunther@...i.sm
Subject: Re: [PATCH v5 5/6] drm/imx: Introduce i.MX8qm/qxp DPU DRM
Hi Laurentiu,
On Fri, 2021-01-15 at 19:27 +0200, Laurentiu Palcu wrote:
> Hi Liu Ying,
>
> I promised I would have a second, more in-depth, look at this and I finally
> managed to do it.
Thanks.
>
> I have to admit it was a challenge. Partially because I'm not very familiar
> with DPU but mostly because of the abundance of macros used. It's true, macros
> make the code more compact. However they made the entire code hard to read,
> as neither ctags nor cscope were able to cross-reference it properly, and I
> fear it will be even harder to maintain in the long run... :/ For example,
> trying to figure out where dpu_*_hw_init() functions were called from was no
> easy task. Or dpu_*_put(). Or dpu_*_get(). :/
>
> Also, most of the macros are not in-line with Linux Kernel coding
> style when it comes to macro usage: they affect control flow and some depend
> on other local variables being already defined.
>
> The good news is most macros can be replaced with helper functions and it would
> not add too much extra code.
Ok, I'll remove macros where possible.
>
> More comments below.
Please find feedbacks below.
>
> On Fri, Dec 18, 2020 at 11:23:52AM +0800, Liu Ying wrote:
> > This patch introduces i.MX8qm/qxp Display Processing Unit(DPU) DRM support.
> >
> > DPU is comprised of two main components that include a blit engine for
> > 2D graphics accelerations(with composition support) and a display controller
> > for display output processing, as well as a command sequencer. Outside of
> > DPU, optional prefetch engines, a.k.a, Prefetch Resolve Gasket(PRG) and
> > Display Prefetch Resolve(DPR), can fetch data from memory prior to some DPU
> > fetchunits of blit engine and display controller. The prefetch engines
> > support reading linear formats and resolving Vivante GPU tile formats.
> >
> > This patch adds kernel modesetting support for the display controller part.
> > The driver supports two CRTCs per display controller, planes backed by
> > four fetchunits(decode0/1, fetchlayer, fetchwarp), fetchunit allocation
> > logic for the two CRTCs, prefetch engines(with tile resolving supported),
> > plane upscaling/deinterlacing/yuv2rgb CSC/alpha blending and CRTC gamma
> > correction. The registers of the controller is accessed without command
> > sequencer involved, instead just by using CPU.
> >
> > Reference manual can be found at:
> > https://www.nxp.com/webapp/Download?colCode=IMX8DQXPRM
> >
> > Signed-off-by: Liu Ying <victor.liu@....com>
> > ---
> > v4->v5:
> > * Rebase up onto the latest drm-misc-next branch and remove the hook to
> > drm_atomic_helper_legacy_gamma_set(), because it was dropped by the newly
> > landed commit 'drm: automatic legacy gamma support'.
> > * Remove a redundant blank line from dpu_plane_atomic_update().
> >
> > v3->v4:
> > * No change.
> >
> > v2->v3:
> > * Fix build warnings Reported-by: kernel test robot <lkp@...el.com>.
> > * Drop build dependency on IMX_SCU, as dummy SCU functions have been added in
> > header files by the patch 'firmware: imx: add dummy functions' which has
> > landed in linux-next/master branch.
> >
> > v1->v2:
> > * Add compatible for i.MX8qm DPU, as this is tested with i.MX8qm LVDS displays.
> > (Laurentiu)
> > * Fix PRG burst size and stride. (Laurentiu)
> > * Put 'ports' OF node to fix the bail-out logic in dpu_drm_probe(). (Laurentiu)
> >
> > drivers/gpu/drm/imx/Kconfig | 1 +
> > drivers/gpu/drm/imx/Makefile | 1 +
> > drivers/gpu/drm/imx/dpu/Kconfig | 10 +
> > drivers/gpu/drm/imx/dpu/Makefile | 10 +
> > drivers/gpu/drm/imx/dpu/dpu-constframe.c | 170 ++++++
> > drivers/gpu/drm/imx/dpu/dpu-core.c | 881 ++++++++++++++++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-crtc.c | 925 ++++++++++++++++++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-crtc.h | 62 ++
> > drivers/gpu/drm/imx/dpu/dpu-disengcfg.c | 114 ++++
> > drivers/gpu/drm/imx/dpu/dpu-dprc.c | 721 +++++++++++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-dprc.h | 40 ++
> > drivers/gpu/drm/imx/dpu/dpu-drv.c | 297 ++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-drv.h | 28 +
> > drivers/gpu/drm/imx/dpu/dpu-extdst.c | 296 ++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c | 291 ++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-fetcheco.c | 221 +++++++
> > drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c | 151 +++++
> > drivers/gpu/drm/imx/dpu/dpu-fetchunit.c | 609 ++++++++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-fetchunit.h | 191 ++++++
> > drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c | 247 ++++++++
> > drivers/gpu/drm/imx/dpu/dpu-framegen.c | 392 +++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-gammacor.c | 220 +++++++
> > drivers/gpu/drm/imx/dpu/dpu-hscaler.c | 272 +++++++++
> > drivers/gpu/drm/imx/dpu/dpu-kms.c | 543 ++++++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-kms.h | 23 +
> > drivers/gpu/drm/imx/dpu/dpu-layerblend.c | 345 +++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-plane.c | 702 +++++++++++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-plane.h | 56 ++
> > drivers/gpu/drm/imx/dpu/dpu-prg.c | 433 ++++++++++++++
> > drivers/gpu/drm/imx/dpu/dpu-prg.h | 45 ++
> > drivers/gpu/drm/imx/dpu/dpu-prv.h | 203 +++++++
> > drivers/gpu/drm/imx/dpu/dpu-tcon.c | 249 ++++++++
> > drivers/gpu/drm/imx/dpu/dpu-vscaler.c | 305 ++++++++++
> > drivers/gpu/drm/imx/dpu/dpu.h | 389 +++++++++++++
> > 34 files changed, 9443 insertions(+)
> > create mode 100644 drivers/gpu/drm/imx/dpu/Kconfig
> > create mode 100644 drivers/gpu/drm/imx/dpu/Makefile
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-constframe.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-core.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-disengcfg.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-extdst.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetcheco.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-framegen.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-gammacor.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-hscaler.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-layerblend.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prv.h
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-tcon.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu-vscaler.c
> > create mode 100644 drivers/gpu/drm/imx/dpu/dpu.h
> >
>
> [...]
>
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-core.c b/drivers/gpu/drm/imx/dpu/dpu-core.c
> > new file mode 100644
> > index 00000000..52224ae
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-core.c
> > @@ -0,0 +1,881 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +/*
> > + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> > + * Copyright 2017-2020 NXP
> > + */
> > +
> > +#include <linux/dma-mapping.h>
> > +#include <linux/io.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/sizes.h>
> > +
> > +#include "dpu.h"
> > +#include "dpu-prv.h"
> > +
> > +static inline u32 dpu_comctrl_read(struct dpu_soc *dpu, unsigned int offset)
> > +{
> > + return readl(dpu->comctrl_reg + offset);
> > +}
> > +
> > +static inline void dpu_comctrl_write(struct dpu_soc *dpu,
> > + unsigned int offset, u32 value)
> > +{
> > + writel(value, dpu->comctrl_reg + offset);
> > +}
> > +
> > +/* Constant Frame */
> > +static const unsigned int cf_ids[] = {0, 1, 4, 5};
> > +static const enum dpu_unit_type cf_types[] = {DPU_DISP, DPU_DISP,
> > + DPU_DISP, DPU_DISP};
> > +static const unsigned long cf_ofss[] = {0x4400, 0x5400, 0x4c00, 0x5c00};
> > +static const unsigned long cf_pec_ofss[] = {0x960, 0x9e0, 0x9a0, 0xa20};
> > +
> > +/* Display Engine Configuration */
> > +static const unsigned int dec_ids[] = {0, 1};
> > +static const enum dpu_unit_type dec_types[] = {DPU_DISP, DPU_DISP};
> > +static const unsigned long dec_ofss[] = {0xb400, 0xb420};
> > +
> > +/* External Destination */
> > +static const unsigned int ed_ids[] = {0, 1, 4, 5};
> > +static const enum dpu_unit_type ed_types[] = {DPU_DISP, DPU_DISP,
> > + DPU_DISP, DPU_DISP};
> > +static const unsigned long ed_ofss[] = {0x4800, 0x5800, 0x5000, 0x6000};
> > +static const unsigned long ed_pec_ofss[] = {0x980, 0xa00, 0x9c0, 0xa40};
> > +
> > +/* Fetch Decode */
> > +static const unsigned int fd_ids[] = {0, 1, 9};
> > +static const enum dpu_unit_type fd_types[] = {DPU_DISP, DPU_DISP, DPU_BLIT};
> > +static const unsigned long fd_ofss[] = {0x6c00, 0x7800, 0x1000};
> > +static const unsigned long fd_pec_ofss[] = {0xa80, 0xaa0, 0x820};
> > +
> > +/* Fetch ECO */
> > +static const unsigned int fe_ids[] = {0, 1, 2, 9};
> > +static const enum dpu_unit_type fe_types[] = {DPU_DISP, DPU_DISP,
> > + DPU_DISP, DPU_BLIT};
> > +static const unsigned long fe_ofss[] = {0x7400, 0x8000, 0x6800, 0x1c00};
> > +static const unsigned long fe_pec_ofss[] = {0xa90, 0xab0, 0xa70, 0x850};
> > +
> > +/* Frame Generator */
> > +static const unsigned int fg_ids[] = {0, 1};
> > +static const enum dpu_unit_type fg_types[] = {DPU_DISP, DPU_DISP};
> > +static const unsigned long fg_ofss[] = {0xb800, 0xd400};
> > +
> > +/* Fetch Layer */
> > +static const unsigned int fl_ids[] = {0};
> > +static const enum dpu_unit_type fl_types[] = {DPU_DISP};
> > +static const unsigned long fl_ofss[] = {0x8400};
> > +static const unsigned long fl_pec_ofss[] = {0xac0};
> > +
> > +/* Fetch Warp */
> > +static const unsigned int fw_ids[] = {2, 9};
> > +static const enum dpu_unit_type fw_types[] = {DPU_DISP, DPU_BLIT};
> > +static const unsigned long fw_ofss[] = {0x6400, 0x1800};
> > +static const unsigned long fw_pec_ofss[] = {0xa60, 0x840};
> > +
> > +/* Gamma Correction */
> > +static const unsigned int gc_ids[] = {0, 1};
> > +static const enum dpu_unit_type gc_types[] = {DPU_DISP, DPU_DISP};
> > +static const unsigned long gc_ofss[] = {0xc000, 0xdc00};
> > +
> > +/* Horizontal Scaler */
> > +static const unsigned int hs_ids[] = {4, 5, 9};
> > +static const enum dpu_unit_type hs_types[] = {DPU_DISP, DPU_DISP, DPU_BLIT};
> > +static const unsigned long hs_ofss[] = {0x9000, 0x9c00, 0x3000};
> > +static const unsigned long hs_pec_ofss[] = {0xb00, 0xb60, 0x8c0};
> > +
> > +/* Layer Blend */
> > +static const unsigned int lb_ids[] = {0, 1, 2, 3};
> > +static const enum dpu_unit_type lb_types[] = {DPU_DISP, DPU_DISP,
> > + DPU_DISP, DPU_DISP};
> > +static const unsigned long lb_ofss[] = {0xa400, 0xa800, 0xac00, 0xb000};
> > +static const unsigned long lb_pec_ofss[] = {0xba0, 0xbc0, 0xbe0, 0xc00};
> > +
> > +/* Timing Controller */
> > +static const unsigned int tcon_ids[] = {0, 1};
> > +static const enum dpu_unit_type tcon_types[] = {DPU_DISP, DPU_DISP};
> > +static const unsigned long tcon_ofss[] = {0xc800, 0xe400};
> > +
> > +/* Vertical Scaler */
> > +static const unsigned int vs_ids[] = {4, 5, 9};
> > +static const enum dpu_unit_type vs_types[] = {DPU_DISP, DPU_DISP, DPU_BLIT};
> > +static const unsigned long vs_ofss[] = {0x9400, 0xa000, 0x3400};
> > +static const unsigned long vs_pec_ofss[] = {0xb20, 0xb80, 0x8e0};
> > +
> > +#define DPU_UNITS_DEFINE(unit) \
> > +static const struct dpu_units dpu_##unit##s = { \
> > + .ids = unit##_ids, \
> > + .types = unit##_types, \
> > + .ofss = unit##_ofss, \
> > + .pec_ofss = unit##_pec_ofss, \
> > + .cnt = ARRAY_SIZE(unit##_ids), \
> > +}
> > +
> > +/* units without Pixel Engine Configuration */
> > +#define DPU_UNITS_DEFINE_NO_PEC(unit) \
> > +static const struct dpu_units dpu_##unit##s = { \
> > + .ids = unit##_ids, \
> > + .types = unit##_types, \
> > + .ofss = unit##_ofss, \
> > + .pec_ofss = NULL, \
> > + .cnt = ARRAY_SIZE(unit##_ids), \
> > +}
> > +
> > +DPU_UNITS_DEFINE(cf);
> > +DPU_UNITS_DEFINE_NO_PEC(dec);
> > +DPU_UNITS_DEFINE(ed);
> > +DPU_UNITS_DEFINE(fd);
> > +DPU_UNITS_DEFINE(fe);
> > +DPU_UNITS_DEFINE_NO_PEC(fg);
> > +DPU_UNITS_DEFINE(fl);
> > +DPU_UNITS_DEFINE(fw);
> > +DPU_UNITS_DEFINE_NO_PEC(gc);
> > +DPU_UNITS_DEFINE(hs);
> > +DPU_UNITS_DEFINE(lb);
> > +DPU_UNITS_DEFINE_NO_PEC(tcon);
> > +DPU_UNITS_DEFINE(vs);
>
> Wouldn't it be better if you defined the unit structures directly? Like below?
>
> static const struct dpu_units dpu_cfs = {
> .ids = {0, 1, 4, 5},
> .types = {DPU_DISP, DPU_DISP, DPU_DISP, DPU_DISP},
> .ofss = {0x4400, 0x5400, 0x4c00, 0x5c00},
> .pec_ofss = {0x960, 0x9e0, 0x9a0, 0xa20},
> .cnt = 4,
> };
With this, complier generates build warnings like this:
drivers/gpu/drm/imx/dpu/dpu-core.c:36:2: warning: braces around scalar
initializer
.ids = {0, 1, 4, 5},
^
drivers/gpu/drm/imx/dpu/dpu-core.c:36:2: note: (near initialization for
?dpu_cfs.ids?)
drivers/gpu/drm/imx/dpu/dpu-core.c:36:13: warning: excess elements in
scalar initializer
.ids = {0, 1, 4, 5},
^
ids, types, ofss and pec_ofss entries should be pure pointers instead
of scalars, because struct dpu_units covers all DPU units which have
various numbers of instances.
>
> I guess dpu_units structure definition would need to change too. But this would
> help get rid of cf_ids[], cf_types[], cf_ofss[], cf_pec_ofss[], etc. Also, no
Due to the above explainations, it looks that this part of struct
dpu_units definition cannot be changed and the arrays are needed.
> need for macros.
Will drop the macros.
>
> > +
> > +static void dpu_detach_pm_domains(struct dpu_soc *dpu)
> > +{
> > +#define DPU_DETACH_PM_DOMAIN(name) \
> > +do { \
> > + if (!IS_ERR_OR_NULL(dpu->pd_##name##_link)) \
> > + device_link_del(dpu->pd_##name##_link); \
> > + if (!IS_ERR_OR_NULL(dpu->pd_##name##_dev)) \
> > + dev_pm_domain_detach(dpu->pd_##name##_dev, true); \
> > + \
> > + dpu->pd_##name##_dev = NULL; \
> > + dpu->pd_##name##_link = NULL; \
> > +} while (0)
>
> The above macro could go into a separate function:
>
> ~~~
> static void dpu_detach_pm_domain(struct device **pd_dev,
> struct device_link **pd_link)
> {
> if (!IS_ERR_OR_NULL(*pd_link))
> device_link_del(*pd_link);
> if (!IS_ERR_OR_NULL(*pd_dev))
> dev_pm_domain_detach(*pd_dev, true);
>
> *pd_dev = NULL;
> *pd_link = NULL;
> }
> ~~~
>
> > +
> > + DPU_DETACH_PM_DOMAIN(pll1);
> > + DPU_DETACH_PM_DOMAIN(pll0);
> > + DPU_DETACH_PM_DOMAIN(dc);
>
> And instead of the macros, you could call the helper function directly:
>
> dpu_detach_pm_domain(&dpu->pd_pll1_dev, &dpu->pd_pll1_link);
> dpu_detach_pm_domain(&dpu->pd_pll0_dev, &dpu->pd_pll0_link);
> dpu_detach_pm_domain(&dpu->pd_dc_dev, &dpu->pd_dc_link);
>
> Wouldn't that be OK?
Ok, will use functions.
>
> > +}
> > +
> > +static int dpu_attach_pm_domains(struct dpu_soc *dpu)
> > +{
> > + u32 flags = DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE;
> > + int ret = 0;
> > +
> > +#define DPU_ATTACH_PM_DOMAIN(name) \
> > +do { \
> > + dpu->pd_##name##_dev = \
> > + dev_pm_domain_attach_by_name(dpu->dev, "" #name ""); \
> > + if (IS_ERR(dpu->pd_##name##_dev)) { \
> > + ret = PTR_ERR(dpu->pd_##name##_dev); \
> > + dev_err(dpu->dev, \
> > + "failed to attach " #name " pd dev: %d\n", ret);\
> > + goto fail; \
> > + } \
> > + \
> > + dpu->pd_##name##_link = \
> > + device_link_add(dpu->dev, dpu->pd_##name##_dev, flags); \
> > + if (IS_ERR(dpu->pd_##name##_link)) { \
> > + ret = PTR_ERR(dpu->pd_##name##_link); \
> > + dev_err(dpu->dev, \
> > + "failed to add device link to " #name \
> > + " pd dev: %d\n", ret); \
> > + goto fail; \
> > + } \
> > +} while (0)
>
> This one should go into a separate function:
> static int dpu_attach_pm_domain(struct dpu_soc *dpu,
> struct device **pd_dev,
> struct device_link **pd_link,
> const char *name)
>
>
> > +
> > + DPU_ATTACH_PM_DOMAIN(dc);
> > + DPU_ATTACH_PM_DOMAIN(pll0);
> > + DPU_ATTACH_PM_DOMAIN(pll1);
>
> And these can call the helper functions directly:
> ret = dpu_attach_pm_domain(dpu, &dpu->pd_dc_dev, &dpu->pd_dc_link, "dc");
> if (ret)
> goto fail;
>
> Would this add too much code?
Will use functions.
>
> > +
> > + return ret;
> > +fail:
> > + dpu_detach_pm_domains(dpu);
> > + return ret;
> > +}
> > +
> > +static void dpu_units_addr_dbg(struct dpu_soc *dpu, unsigned long dpu_base)
> > +{
> > + int i;
> > +
> > + dev_dbg(dpu->dev, "Common Control: 0x%08lx\n", dpu_base);
> > +
> > +#define DPU_UNITS_ADDR_DBG(unit) \
> > +do { \
> > + const struct dpu_units *us = &dpu_##unit##s; \
> > + \
> > + for (i = 0; i < us->cnt; i++) { \
> > + if (us->pec_ofss) { \
> > + dev_dbg(dpu->dev, "%s%d: pixengcfg @ 0x%08lx," \
> > + " unit @ 0x%08lx\n", #unit, \
> > + us->ids[i], \
> > + dpu_base + us->pec_ofss[i], \
> > + dpu_base + us->ofss[i]); \
> > + } else { \
> > + dev_dbg(dpu->dev, \
> > + "%s%d: unit @ 0x%08lx\n", #unit, \
> > + us->ids[i], dpu_base + us->ofss[i]); \
> > + } \
> > + } \
> > +} while (0)
>
> A separate helper function dpu_unit_add_dbg() would work here too.
Will create an array to contain all points of struct dpu_units and go
through the array directly to show the debug message. The array can
also be used by dpu_submodules_init() and dpu_submodules_hw_init().
The arrary will look like:
static const struct dpu_units *dpu_all_units[] = {
&dpu_cfs,
&dpu_decs,
&dpu_eds,
&dpu_fds,
&dpu_fes,
&dpu_fgs,
&dpu_fls,
&dpu_fws,
&dpu_gcs,
&dpu_hss,
&dpu_lbs,
&dpu_tcons,
&dpu_vss,
};
>
> > +
> > + DPU_UNITS_ADDR_DBG(cf);
> > + DPU_UNITS_ADDR_DBG(dec);
> > + DPU_UNITS_ADDR_DBG(ed);
> > + DPU_UNITS_ADDR_DBG(fd);
> > + DPU_UNITS_ADDR_DBG(fe);
> > + DPU_UNITS_ADDR_DBG(fg);
> > + DPU_UNITS_ADDR_DBG(fl);
> > + DPU_UNITS_ADDR_DBG(fw);
> > + DPU_UNITS_ADDR_DBG(gc);
> > + DPU_UNITS_ADDR_DBG(hs);
> > + DPU_UNITS_ADDR_DBG(lb);
> > + DPU_UNITS_ADDR_DBG(tcon);
> > + DPU_UNITS_ADDR_DBG(vs);
>
> And these could be changed into calling the helper directly.
>
> > +}
> > +
> > +static int dpu_get_irq(struct platform_device *pdev, struct dpu_soc *dpu)
>
> This could be renamed dpu_get_irqs().
Will do.
>
> > +{
> > +#define DPU_GET_IRQ(name) \
> > +do { \
> > + dpu->irq_##name = platform_get_irq_byname(pdev, "" #name ""); \
> > + dev_dbg(dpu->dev, "get irq_" #name ": %d\n", dpu->irq_##name); \
> > + if (dpu->irq_##name < 0) { \
> > + dev_err_probe(dpu->dev, dpu->irq_##name, \
> > + "failed to get irq " #name "\n"); \
> > + return dpu->irq_##name; \
> > + } \
> > +} while (0)
>
> And this macro could be put under a new dpu_get_irq():
>
> static int dpu_get_irq(struct platform_device *pdev, struct dpu_soc *dpu,
> int *irq, const char *name)
>
> > +
> > + DPU_GET_IRQ(disengcfg_framecomplete0);
> > + DPU_GET_IRQ(disengcfg_seqcomplete0);
> > + DPU_GET_IRQ(disengcfg_shdload0);
> > + DPU_GET_IRQ(disengcfg_framecomplete1);
> > + DPU_GET_IRQ(disengcfg_seqcomplete1);
> > + DPU_GET_IRQ(disengcfg_shdload1);
> > + DPU_GET_IRQ(extdst0_shdload);
> > + DPU_GET_IRQ(extdst1_shdload);
> > + DPU_GET_IRQ(extdst4_shdload);
> > + DPU_GET_IRQ(extdst5_shdload);
>
> All these macros could be transformed into something like:
>
> ~~~
> struct {
> int *irq;
> const char *name;
> } irqs[] = {
> {&dpu->irq_disengcfg_framecomplete0, "disengcfg_framecomplete0"},
> {&dpu->irq_disengcfg_seqcomplete0, "disengcfg_seqcomplete0"},
> ...
> };
>
> for (i = 0; i < ARRAY_SIZE(irqs); i++) {
> ret = dpu_get_irq(pdev, dpu, irqs[i].irq, irqs[i].name);
> if (ret)
> return ret;
> }
> ~~~
Instead of defining irqs individually, I'll use an array to store all
irqs in struct dpu_soc. Then get all irqs by
calling platform_get_irq() and store them in dpu->irq[].
>
> > +
> > + return 0;
> > +}
> > +
> > +static void dpu_irq_handle(struct irq_desc *desc, enum dpu_irq irq)
> > +{
> > + struct dpu_soc *dpu = irq_desc_get_handler_data(desc);
> > + struct irq_chip *chip = irq_desc_get_chip(desc);
> > + unsigned int virq;
> > + u32 status;
> > +
> > + chained_irq_enter(chip, desc);
> > +
> > + status = dpu_comctrl_read(dpu, USERINTERRUPTSTATUS(irq / 32));
> > + status &= dpu_comctrl_read(dpu, USERINTERRUPTENABLE(irq / 32));
> > +
> > + if (status & BIT(irq % 32)) {
> > + virq = irq_linear_revmap(dpu->domain, irq);
> > + if (virq)
> > + generic_handle_irq(virq);
> > + }
> > +
> > + chained_irq_exit(chip, desc);
> > +}
> > +
> > +#define DPU_IRQ_DISENGCFG_FRAMECOMPLETE_HANDLER_DEFINE(id) \
> > +static void \
> > +dpu_disengcfg_framecomplete##id##_irq_handler(struct irq_desc *desc) \
> > +{ \
> > + dpu_irq_handle(desc, DPU_IRQ_DISENGCFG_FRAMECOMPLETE##id); \
> > +}
> > +
> > +#define DPU_IRQ_DISENGCFG_SEQCOMPLETE_HANDLER_DEFINE(id) \
> > +static void \
> > +dpu_disengcfg_seqcomplete##id##_irq_handler(struct irq_desc *desc) \
> > +{ \
> > + dpu_irq_handle(desc, DPU_IRQ_DISENGCFG_SEQCOMPLETE##id); \
> > +}
> > +
> > +#define DPU_IRQ_DISENGCFG_SHDLOAD_HANDLER_DEFINE(id) \
> > +static void \
> > +dpu_disengcfg_shdload##id##_irq_handler(struct irq_desc *desc) \
> > +{ \
> > + dpu_irq_handle(desc, DPU_IRQ_DISENGCFG_SHDLOAD##id); \
> > +}
> > +
> > +#define DPU_IRQ_EXTDST_SHDLOAD_HANDLER_DEFINE(id) \
> > +static void \
> > +dpu_extdst##id##_shdload_irq_handler(struct irq_desc *desc) \
> > +{ \
> > + dpu_irq_handle(desc, DPU_IRQ_EXTDST##id##_SHDLOAD); \
> > +}
I'll define the irq handlers directly and drop the macros.
> > +
> > +DPU_IRQ_DISENGCFG_FRAMECOMPLETE_HANDLER_DEFINE(0)
> > +DPU_IRQ_DISENGCFG_FRAMECOMPLETE_HANDLER_DEFINE(1)
> > +
> > +DPU_IRQ_DISENGCFG_SEQCOMPLETE_HANDLER_DEFINE(0)
> > +DPU_IRQ_DISENGCFG_SEQCOMPLETE_HANDLER_DEFINE(1)
> > +
> > +DPU_IRQ_DISENGCFG_SHDLOAD_HANDLER_DEFINE(0)
> > +DPU_IRQ_DISENGCFG_SHDLOAD_HANDLER_DEFINE(1)
> > +
> > +DPU_IRQ_EXTDST_SHDLOAD_HANDLER_DEFINE(0)
> > +DPU_IRQ_EXTDST_SHDLOAD_HANDLER_DEFINE(1)
> > +DPU_IRQ_EXTDST_SHDLOAD_HANDLER_DEFINE(4)
> > +DPU_IRQ_EXTDST_SHDLOAD_HANDLER_DEFINE(5)
> > +
> > +int dpu_map_irq(struct dpu_soc *dpu, int irq)
> > +{
> > + int virq = irq_linear_revmap(dpu->domain, irq);
> > +
> > + if (!virq)
> > + virq = irq_create_mapping(dpu->domain, irq);
> > +
> > + return virq;
> > +}
> > +
> > +static const unsigned long unused_irq[2] = {0x00000000, 0xfffe0008};
> > +
> > +static void dpu_irq_hw_init(struct dpu_soc *dpu)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < DPU_IRQ_COUNT; i += 32) {
> > + /* mask and clear all interrupts */
> > + dpu_comctrl_write(dpu, USERINTERRUPTENABLE(i / 32), 0);
> > + dpu_comctrl_write(dpu, USERINTERRUPTCLEAR(i / 32),
> > + ~unused_irq[i / 32]);
> > + dpu_comctrl_write(dpu, INTERRUPTENABLE(i / 32), 0);
> > + dpu_comctrl_write(dpu, INTERRUPTCLEAR(i / 32),
> > + ~unused_irq[i / 32]);
> > +
> > + /* set all interrupts to user mode */
> > + dpu_comctrl_write(dpu, USERINTERRUPTMASK(i / 32),
> > + ~unused_irq[i / 32]);
> > + }
> > +}
> > +
> > +static int dpu_irq_init(struct dpu_soc *dpu)
> > +{
> > + struct device *dev = dpu->dev;
> > + struct irq_chip_generic *gc;
> > + struct irq_chip_type *ct;
> > + int ret, i;
> > +
> > + dpu->domain = irq_domain_add_linear(dev->of_node, DPU_IRQ_COUNT,
> > + &irq_generic_chip_ops, dpu);
> > + if (!dpu->domain) {
> > + dev_err(dev, "failed to add irq domain\n");
> > + return -ENODEV;
> > + }
> > +
> > + ret = irq_alloc_domain_generic_chips(dpu->domain, 32, 1, "DPU",
> > + handle_level_irq, 0, 0, 0);
> > + if (ret) {
> > + dev_err(dev, "failed to alloc generic irq chips: %d\n", ret);
> > + irq_domain_remove(dpu->domain);
> > + return ret;
> > + }
> > +
> > + for (i = 0; i < DPU_IRQ_COUNT; i += 32) {
> > + gc = irq_get_domain_generic_chip(dpu->domain, i);
> > + gc->reg_base = dpu->comctrl_reg;
> > + gc->unused = unused_irq[i / 32];
> > + ct = gc->chip_types;
> > + ct->chip.irq_ack = irq_gc_ack_set_bit;
> > + ct->chip.irq_mask = irq_gc_mask_clr_bit;
> > + ct->chip.irq_unmask = irq_gc_mask_set_bit;
> > + ct->regs.ack = USERINTERRUPTCLEAR(i / 32);
> > + ct->regs.mask = USERINTERRUPTENABLE(i / 32);
> > + }
> > +
> > +#define DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(name) \
> > +irq_set_chained_handler_and_data(dpu->irq_##name, dpu_##name##_irq_handler, dpu)
Will create an array to store all irq handlers and go through it to do
this. So, will drop this macro.
> > +
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(disengcfg_framecomplete0);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(disengcfg_seqcomplete0);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(disengcfg_shdload0);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(disengcfg_framecomplete1);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(disengcfg_seqcomplete1);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(disengcfg_shdload1);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(extdst0_shdload);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(extdst1_shdload);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(extdst4_shdload);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA1(extdst5_shdload);
> > +
> > + return ret;
> > +}
> > +
> > +static void dpu_irq_exit(struct dpu_soc *dpu)
> > +{
> > + unsigned int i, irq;
> > +
> > +#define DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(name) \
> > +irq_set_chained_handler_and_data(dpu->irq_##name, NULL, NULL)
Also will drop this macro.
> > +
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(disengcfg_framecomplete0);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(disengcfg_seqcomplete0);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(disengcfg_shdload0);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(disengcfg_framecomplete1);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(disengcfg_seqcomplete1);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(disengcfg_shdload1);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(extdst0_shdload);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(extdst1_shdload);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(extdst4_shdload);
> > + DPU_IRQ_SET_CHAINED_HANDLER_AND_DATA2(extdst5_shdload);
> > +
> > + for (i = 0; i < DPU_IRQ_COUNT; i++) {
> > + irq = irq_linear_revmap(dpu->domain, i);
> > + if (irq)
> > + irq_dispose_mapping(irq);
> > + }
> > +
> > + irq_domain_remove(dpu->domain);
> > +}
> > +
> > +static void dpu_submodules_hw_init(struct dpu_soc *dpu)
> > +{
> > +#define DPU_UNITS_HW_INIT(unit) \
> > +do { \
> > + const struct dpu_units *us = &dpu_##unit##s; \
> > + int i; \
> > + \
> > + for (i = 0; i < us->cnt; i++) \
> > + dpu_##unit##_hw_init(dpu, i); \
> > +} while (0)
> > +
> > + DPU_UNITS_HW_INIT(cf);
> > + DPU_UNITS_HW_INIT(dec);
> > + DPU_UNITS_HW_INIT(ed);
> > + DPU_UNITS_HW_INIT(fd);
> > + DPU_UNITS_HW_INIT(fe);
> > + DPU_UNITS_HW_INIT(fg);
> > + DPU_UNITS_HW_INIT(fl);
> > + DPU_UNITS_HW_INIT(fw);
> > + DPU_UNITS_HW_INIT(gc);
> > + DPU_UNITS_HW_INIT(hs);
> > + DPU_UNITS_HW_INIT(lb);
> > + DPU_UNITS_HW_INIT(tcon);
> > + DPU_UNITS_HW_INIT(vs);
> > +}
>
> This entire function can be rewritten without macros and it wouldn't
> take too much extra code...
>
> ~~~
> int i, j;
> struct {
> int cnt;
> void (*hw_init)(struct dpu_soc *dpu, unsigned int index);
> } hw_units[] = {
> {dpu_cfs.cnt, dpu_cf_hw_init},
> {dpu_decs.cnt, dpu_dec_hw_init},
> ...
> };
>
> for (i = 0; i < ARRAY_SIZE(hw_units); i++)
> for (j = 0; j < hw_units[i].cnt; j++)
> hw_units[i].hw_init(dpu, i);
>
> ~~~
Will add a hw_init() callback in struct dpu_units and go through
dpu_all_units[] to this.
>
>
> > +
> > +static int dpu_submodules_init(struct dpu_soc *dpu, unsigned long dpu_base)
> > +{
> > + int ret, i;
> > +
> > +#define DPU_UNIT_INIT(unit, base, index, id, type, pec_ofs, ofs) \
> > +do { \
> > + ret = dpu_##unit##_init(dpu, (index), (id), (type), \
> > + (pec_ofs) ? (base) + (pec_ofs) : 0, \
> > + (base) + (ofs)); \
> > + if (ret) { \
> > + dev_err(dpu->dev, "failed to initialize %s%d: %d\n", \
> > + #unit, (id), ret); \
> > + return ret; \
> > + } \
> > +} while (0)
> > +
> > +#define DPU_UNITS_INIT(unit) \
> > +do { \
> > + const struct dpu_units *us = &dpu_##unit##s; \
> > + \
> > + for (i = 0; i < us->cnt; i++) \
> > + DPU_UNIT_INIT(unit, dpu_base, i, \
> > + us->ids[i], us->types[i], \
> > + us->pec_ofss ? us->pec_ofss[i] : 0, \
> > + us->ofss[i]); \
> > +} while (0)
> > +
> > + DPU_UNITS_INIT(cf);
> > + DPU_UNITS_INIT(dec);
> > + DPU_UNITS_INIT(ed);
> > + DPU_UNITS_INIT(fd);
> > + DPU_UNITS_INIT(fe);
> > + DPU_UNITS_INIT(fg);
> > + DPU_UNITS_INIT(fl);
> > + DPU_UNITS_INIT(fw);
> > + DPU_UNITS_INIT(gc);
> > + DPU_UNITS_INIT(hs);
> > + DPU_UNITS_INIT(lb);
> > + DPU_UNITS_INIT(tcon);
> > + DPU_UNITS_INIT(vs);
> > +
> > + return 0;
> > +}
>
> This one too. Macros can be avoided.
Will add a init() callback in struct dpu_units and go through
dpu_all_units[] to this.
>
> > +
> > +static int platform_remove_devices_fn(struct device *dev, void *unused)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > +
> > + platform_device_unregister(pdev);
> > +
> > + return 0;
> > +}
> > +
> > +static void platform_device_unregister_children(struct platform_device *pdev)
> > +{
> > + device_for_each_child(&pdev->dev, NULL, platform_remove_devices_fn);
> > +}
> > +
> > +struct dpu_platform_reg {
> > + struct dpu_client_platformdata pdata;
> > + const char *name;
> > +};
> > +
> > +static struct dpu_platform_reg client_reg[] = {
> > + {
> > + .pdata = {
> > + .stream_id = 0,
> > + .dec_frame_complete_irq = DPU_IRQ_DISENGCFG_FRAMECOMPLETE0,
> > + .dec_seq_complete_irq = DPU_IRQ_DISENGCFG_SEQCOMPLETE0,
> > + .dec_shdld_irq = DPU_IRQ_DISENGCFG_SHDLOAD0,
> > + .ed_cont_shdld_irq = DPU_IRQ_EXTDST0_SHDLOAD,
> > + .ed_safe_shdld_irq = DPU_IRQ_EXTDST4_SHDLOAD,
> > + },
> > + .name = "imx-dpu-crtc",
> > + }, {
> > + .pdata = {
> > + .stream_id = 1,
> > + .dec_frame_complete_irq = DPU_IRQ_DISENGCFG_FRAMECOMPLETE1,
> > + .dec_seq_complete_irq = DPU_IRQ_DISENGCFG_SEQCOMPLETE1,
> > + .dec_shdld_irq = DPU_IRQ_DISENGCFG_SHDLOAD1,
> > + .ed_cont_shdld_irq = DPU_IRQ_EXTDST1_SHDLOAD,
> > + .ed_safe_shdld_irq = DPU_IRQ_EXTDST5_SHDLOAD,
> > + },
> > + .name = "imx-dpu-crtc",
> > + }
> > +};
> > +
> > +static DEFINE_MUTEX(dpu_client_id_mutex);
> > +static int dpu_client_id;
> > +
> > +static int dpu_get_plane_grp_res(struct dpu_soc *dpu,
> > + struct dpu_plane_grp *grp)
> > +{
> > + struct dpu_plane_res *res = &grp->res;
> > + int i, j;
> > + int ret = 0;
> > +
> > + INIT_LIST_HEAD(&grp->fu_list);
> > +
> > +#define DPU_UNITS_GET_FOR_PLANE_GRP(unit) \
> > +do { \
> > + for (i = 0; i < ARRAY_SIZE(unit##_ids); i++) { \
> > + if (unit##_types[i] == DPU_DISP) \
> > + res->unit##_cnt++; \
> > + } \
> > + \
> > + res->unit = devm_kcalloc(dpu->dev, res->unit##_cnt, \
> > + sizeof(*res->unit), GFP_KERNEL); \
> > + if (!res->unit) \
> > + return -ENOMEM; \
> > + \
> > + for (i = 0, j = 0; i < ARRAY_SIZE(unit##_ids); i++) { \
> > + if (unit##_types[i] != DPU_DISP) \
> > + continue; \
> > + \
> > + res->unit[j] = dpu_##unit##_get(dpu, unit##_ids[i]); \
> > + if (IS_ERR(res->unit[j])) { \
> > + ret = PTR_ERR(res->unit[j]); \
> > + dev_err(dpu->dev, \
> > + "failed to get %s%d: %d\n", \
> > + #unit, unit##_ids[i], ret); \
> > + return ret; \
> > + } \
> > + j++; \
> > + } \
> > +} while (0)
>
> This can be made a separate function too.
Yes for the fetch units.
Will get the layerblend alone as no good way to tell sizeof(*res-
>unit).
>
> > +
> > + DPU_UNITS_GET_FOR_PLANE_GRP(fd);
> > + DPU_UNITS_GET_FOR_PLANE_GRP(fl);
> > + DPU_UNITS_GET_FOR_PLANE_GRP(fw);
> > + DPU_UNITS_GET_FOR_PLANE_GRP(lb);
> > +
> > +#define DPU_FETCHUNIT_ADD_TO_PLANE_GRP_LIST(unit) \
> > +do { \
> > + for (i = res->unit##_cnt - 1; i >= 0; i--) \
> > + dpu_fu_add_to_list(res->unit[i], &grp->fu_list); \
> > +} while (0)
Will drop this marco.
> > +
> > + DPU_FETCHUNIT_ADD_TO_PLANE_GRP_LIST(fd);
> > + DPU_FETCHUNIT_ADD_TO_PLANE_GRP_LIST(fw);
> > + DPU_FETCHUNIT_ADD_TO_PLANE_GRP_LIST(fl);
> > +
> > + grp->hw_plane_cnt = res->fd_cnt + res->fl_cnt + res->fw_cnt;
> > +
> > + return ret;
> > +}
> > +
> > +static void dpu_put_plane_grp_res(struct dpu_plane_grp *grp)
> > +{
> > + struct dpu_plane_res *res = &grp->res;
> > + struct list_head *l, *tmp;
> > + int i;
> > +
> > + grp->hw_plane_cnt = 0;
> > +
> > + list_for_each_safe(l, tmp, &grp->fu_list)
> > + list_del(l);
> > +
> > +#define DPU_UNITS_PUT_FOR_PLANE_GRP(unit) \
> > +do { \
> > + for (i = 0; i < res->unit##_cnt; i++) { \
> > + if (!IS_ERR_OR_NULL(res->unit[i])) \
> > + dpu_##unit##_put(res->unit[i]); \
> > + } \
> > + res->unit##_cnt = 0; \
> > +} while (0)
Will drop this macro.
> > +
> > + DPU_UNITS_PUT_FOR_PLANE_GRP(fd);
> > + DPU_UNITS_PUT_FOR_PLANE_GRP(fl);
> > + DPU_UNITS_PUT_FOR_PLANE_GRP(fw);
> > + DPU_UNITS_PUT_FOR_PLANE_GRP(lb);
> > +}
> > +
> > +static int dpu_add_client_devices(struct dpu_soc *dpu)
> > +{
> > + struct device *dev = dpu->dev;
> > + struct dpu_platform_reg *reg;
> > + struct dpu_crtc_grp *crtc_grp;
> > + struct dpu_plane_grp *plane_grp;
> > + size_t client_cnt, reg_size;
> > + int i, id, ret;
> > +
> > + client_cnt = ARRAY_SIZE(client_reg);
> > +
> > + reg = devm_kcalloc(dev, client_cnt, sizeof(*reg), GFP_KERNEL);
> > + if (!reg)
> > + return -ENOMEM;
> > +
> > + crtc_grp = devm_kzalloc(dev, sizeof(*crtc_grp), GFP_KERNEL);
> > + if (!crtc_grp)
> > + return -ENOMEM;
> > +
> > + plane_grp = devm_kzalloc(dev, sizeof(*plane_grp), GFP_KERNEL);
> > + if (!plane_grp)
> > + return -ENOMEM;
> > +
> > + crtc_grp->plane_grp = plane_grp;
> > +
> > + mutex_lock(&dpu_client_id_mutex);
> > + id = dpu_client_id;
> > + dpu_client_id += client_cnt;
> > + mutex_unlock(&dpu_client_id_mutex);
> > +
> > + reg_size = client_cnt * sizeof(struct dpu_platform_reg);
> > + memcpy(reg, &client_reg[0], reg_size);
> > +
> > + ret = dpu_get_plane_grp_res(dpu, plane_grp);
> > + if (ret)
> > + goto err_get_plane_res;
> > +
> > + for (i = 0; i < client_cnt; i++) {
> > + struct platform_device *pdev;
> > + struct device_node *np;
> > +
> > + /* Associate subdevice with the corresponding port node. */
> > + np = of_graph_get_port_by_id(dev->of_node, i);
> > + if (!np) {
> > + dev_info(dev,
> > + "no port@%d node in %s, not using DISP%d\n",
> > + i, dev->of_node->full_name, i);
> > + continue;
> > + }
> > +
> > + reg[i].pdata.crtc_grp = crtc_grp;
> > +
> > + pdev = platform_device_alloc(reg[i].name, id++);
> > + if (!pdev) {
> > + ret = -ENOMEM;
> > + goto err_register;
> > + }
> > +
> > + pdev->dev.parent = dev;
> > + pdev->dev.of_node = np;
> > + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> > + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> > +
> > + reg[i].pdata.of_node = np;
> > + ret = platform_device_add_data(pdev, ®[i].pdata,
> > + sizeof(reg[i].pdata));
> > + if (!ret)
> > + ret = platform_device_add(pdev);
> > + if (ret) {
> > + platform_device_put(pdev);
> > + goto err_register;
> > + }
> > + }
> > +
> > + return ret;
> > +
> > +err_register:
> > + platform_device_unregister_children(to_platform_device(dev));
> > +err_get_plane_res:
> > + dpu_put_plane_grp_res(plane_grp);
> > +
> > + return ret;
> > +}
> > +
> > +static int dpu_core_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + struct dpu_soc *dpu;
> > + struct resource *res;
> > + unsigned long dpu_base;
> > + int ret;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (!res)
> > + return -ENODEV;
> > +
> > + dpu_base = res->start;
> > +
> > + dpu = devm_kzalloc(dev, sizeof(*dpu), GFP_KERNEL);
> > + if (!dpu)
> > + return -ENOMEM;
> > +
> > + dpu->dev = dev;
> > +
> > + dpu->id = of_alias_get_id(np, "dpu");
> > + if (dpu->id < 0) {
> > + dev_err(dev, "failed to get dpu node alias id: %d\n", dpu->id);
> > + return dpu->id;
> > + }
> > +
> > + dpu_units_addr_dbg(dpu, dpu_base);
> > +
> > + ret = dpu_get_irq(pdev, dpu);
> > + if (ret)
> > + return ret;
> > +
> > + dpu->comctrl_reg = devm_ioremap(dev, dpu_base, SZ_512);
> > + if (!dpu->comctrl_reg)
> > + return -ENOMEM;
> > +
> > + ret = dpu_attach_pm_domains(dpu);
> > + if (ret)
> > + return ret;
> > +
> > + dpu->clk_cfg = devm_clk_get(dev, "cfg");
> > + if (IS_ERR(dpu->clk_cfg)) {
> > + ret = PTR_ERR(dpu->clk_cfg);
> > + dev_err_probe(dev, ret, "failed to get cfg clock\n");
> > + goto failed_clk_cfg_get;
> > + }
> > +
> > + dpu->clk_axi = devm_clk_get(dev, "axi");
> > + if (IS_ERR(dpu->clk_axi)) {
> > + ret = PTR_ERR(dpu->clk_axi);
> > + dev_err_probe(dev, ret, "failed to get axi clock\n");
> > + goto failed_clk_axi_get;
> > + }
> > +
> > + ret = dpu_irq_init(dpu);
> > + if (ret)
> > + goto failed_irq_init;
> > +
> > + ret = dpu_submodules_init(dpu, dpu_base);
> > + if (ret)
> > + goto failed_submodules_init;
> > +
> > + platform_set_drvdata(pdev, dpu);
> > +
> > + pm_runtime_enable(dev);
> > +
> > + ret = dpu_add_client_devices(dpu);
> > + if (ret) {
> > + dev_err(dev, "failed to add client devices: %d\n", ret);
> > + goto failed_add_clients;
> > + }
> > +
> > + return ret;
> > +
> > +failed_add_clients:
> > + pm_runtime_disable(dev);
> > +failed_submodules_init:
> > + dpu_irq_exit(dpu);
> > +failed_irq_init:
> > +failed_clk_axi_get:
> > +failed_clk_cfg_get:
> > + dpu_detach_pm_domains(dpu);
> > + return ret;
> > +}
> > +
> > +static int dpu_core_remove(struct platform_device *pdev)
> > +{
> > + struct dpu_soc *dpu = platform_get_drvdata(pdev);
> > +
> > + platform_device_unregister_children(pdev);
> > + pm_runtime_disable(dpu->dev);
> > + dpu_irq_exit(dpu);
> > + dpu_detach_pm_domains(dpu);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused dpu_runtime_suspend(struct device *dev)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct dpu_soc *dpu = platform_get_drvdata(pdev);
> > +
> > + clk_disable_unprepare(dpu->clk_axi);
> > + clk_disable_unprepare(dpu->clk_cfg);
> > +
> > + dev_dbg(dev, "suspended\n");
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused dpu_runtime_resume(struct device *dev)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct dpu_soc *dpu = platform_get_drvdata(pdev);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(dpu->clk_cfg);
> > + if (ret) {
> > + dev_err(dev, "failed to enable cfg clock: %d\n", ret);
> > + return ret;
> > + }
> > + ret = clk_prepare_enable(dpu->clk_axi);
> > + if (ret) {
> > + clk_disable_unprepare(dpu->clk_cfg);
> > + dev_err(dev, "failed to enable axi clock: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + dpu_irq_hw_init(dpu);
> > +
> > + dpu_submodules_hw_init(dpu);
> > +
> > + dev_dbg(dev, "resumed\n");
> > +
> > + return ret;
> > +}
> > +
> > +static const struct dev_pm_ops dpu_pm_ops = {
> > + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > + pm_runtime_force_resume)
> > + SET_RUNTIME_PM_OPS(dpu_runtime_suspend, dpu_runtime_resume, NULL)
> > +};
> > +
> > +const struct of_device_id dpu_dt_ids[] = {
> > + { .compatible = "fsl,imx8qm-dpu" },
> > + { .compatible = "fsl,imx8qxp-dpu" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, dpu_dt_ids);
> > +
> > +struct platform_driver dpu_core_driver = {
> > + .driver = {
> > + .pm = &dpu_pm_ops,
> > + .name = "dpu-core",
> > + .of_match_table = dpu_dt_ids,
> > + },
> > + .probe = dpu_core_probe,
> > + .remove = dpu_core_remove,
> > +};
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-crtc.c b/drivers/gpu/drm/imx/dpu/dpu-crtc.c
> > new file mode 100644
> > index 00000000..c21bd1d
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-crtc.c
> > @@ -0,0 +1,925 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +/*
> > + * Copyright 2017-2020 NXP
> > + */
> > +
> > +#include <linux/component.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqflags.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/preempt.h>
> > +#include <linux/spinlock.h>
> > +
> > +#include <drm/drm_atomic.h>
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_atomic_state_helper.h>
> > +#include <drm/drm_color_mgmt.h>
> > +
> > +#include "dpu.h"
> > +#include "dpu-crtc.h"
> > +#include "dpu-dprc.h"
> > +#include "dpu-drv.h"
> > +#include "dpu-plane.h"
> > +
> > +#define DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(_name) \
> > +do { \
> > + unsigned long ret; \
> > + ret = wait_for_completion_timeout(&dpu_crtc->_name, HZ); \
> > + if (ret == 0) \
> > + drm_err(crtc->dev, "[CRTC:%d:%s] %s: wait for " #_name \
> > + " timeout\n", \
> > + crtc->base.id, crtc->name, __func__); \
> > +} while (0)
> > +
> > +#define DPU_CRTC_WAIT_FOR_FRAMEGEN_FRAME_CNT_MOVING(fg) \
> > +do { \
> > + if (dpu_fg_wait_for_frame_counter_moving(fg)) \
> > + drm_err(crtc->dev, "[CRTC:%d:%s] %s: " \
> > + "FrameGen frame counter isn't moving\n", \
> > + crtc->base.id, crtc->name, __func__); \
> > +} while (0)
> > +
> > +#define DPU_CRTC_CHECK_FRAMEGEN_FIFO(fg) \
> > +do { \
> > + if (dpu_fg_secondary_requests_to_read_empty_fifo(fg)) { \
> > + dpu_fg_secondary_clear_channel_status(fg); \
> > + drm_err(crtc->dev, \
> > + "[CRTC:%d:%s] %s: FrameGen FIFO empty\n", \
> > + crtc->base.id, crtc->name, __func__); \
> > + } \
> > +} while (0)
> > +
> > +#define DPU_CRTC_WAIT_FOR_FRAMEGEN_SECONDARY_SYNCUP(fg) \
> > +do { \
> > + if (dpu_fg_wait_for_secondary_syncup(fg)) \
> > + drm_err(crtc->dev, \
> > + "[CRTC:%d:%s] %s: " \
> > + "FrameGen secondary channel isn't syncup\n", \
> > + crtc->base.id, crtc->name, __func__); \
> > +} while (0)
> > +
> > +static u32 dpu_crtc_get_vblank_counter(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > +
> > + if (pm_runtime_active(dpu_crtc->dev->parent))
> > + return dpu_fg_get_frame_index(dpu_crtc->fg);
> > + else
> > + return (u32)drm_crtc_vblank_count(crtc);
> > +}
> > +
> > +static int dpu_crtc_enable_vblank(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > +
> > + enable_irq(dpu_crtc->dec_frame_complete_irq);
> > +
> > + return 0;
> > +}
> > +
> > +static void dpu_crtc_disable_vblank(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > +
> > + disable_irq_nosync(dpu_crtc->dec_frame_complete_irq);
> > +}
> > +
> > +static irqreturn_t
> > +dpu_crtc_dec_frame_complete_irq_handler(int irq, void *dev_id)
> > +{
> > + struct dpu_crtc *dpu_crtc = dev_id;
> > + struct drm_crtc *crtc = &dpu_crtc->base;
> > + unsigned long flags;
> > +
> > + drm_crtc_handle_vblank(crtc);
> > +
> > + spin_lock_irqsave(&crtc->dev->event_lock, flags);
> > + if (dpu_crtc->event) {
> > + drm_crtc_send_vblank_event(crtc, dpu_crtc->event);
> > + dpu_crtc->event = NULL;
> > + drm_crtc_vblank_put(crtc);
> > + }
> > + spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +#define DPU_CRTC_IRQ_HANDLER_DEFINE(name) \
> > +static irqreturn_t dpu_crtc_##name##_irq_handler(int irq, void *dev_id) \
> > +{ \
> > + struct dpu_crtc *dpu_crtc = dev_id; \
> > + complete(&dpu_crtc->name##_done); \
> > + return IRQ_HANDLED; \
> > +}
Will drop this macro and define a common irq handler.
> > +
> > +DPU_CRTC_IRQ_HANDLER_DEFINE(dec_seq_complete)
> > +DPU_CRTC_IRQ_HANDLER_DEFINE(dec_shdld)
> > +DPU_CRTC_IRQ_HANDLER_DEFINE(ed_cont_shdld)
> > +DPU_CRTC_IRQ_HANDLER_DEFINE(ed_safe_shdld)
> > +
> > +static const struct drm_crtc_funcs dpu_crtc_funcs = {
> > + .reset = drm_atomic_helper_crtc_reset,
> > + .destroy = drm_crtc_cleanup,
> > + .set_config = drm_atomic_helper_set_config,
> > + .page_flip = drm_atomic_helper_page_flip,
> > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> > + .get_vblank_counter = dpu_crtc_get_vblank_counter,
> > + .enable_vblank = dpu_crtc_enable_vblank,
> > + .disable_vblank = dpu_crtc_disable_vblank,
> > + .get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp,
> > +};
> > +
> > +static void dpu_crtc_queue_state_event(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > +
> > + spin_lock_irq(&crtc->dev->event_lock);
> > + if (crtc->state->event) {
> > + WARN_ON(drm_crtc_vblank_get(crtc));
> > + WARN_ON(dpu_crtc->event);
> > + dpu_crtc->event = crtc->state->event;
> > + crtc->state->event = NULL;
> > + }
> > + spin_unlock_irq(&crtc->dev->event_lock);
> > +}
> > +
> > +static enum drm_mode_status
> > +dpu_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode)
> > +{
> > + if (mode->crtc_clock > DPU_FRAMEGEN_MAX_CLOCK)
> > + return MODE_CLOCK_HIGH;
> > +
> > + return MODE_OK;
> > +}
> > +
> > +static void dpu_crtc_pm_runtime_get_sync(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + int ret;
> > +
> > + ret = pm_runtime_get_sync(dpu_crtc->dev->parent);
> > + if (ret < 0) {
> > + pm_runtime_put_noidle(dpu_crtc->dev->parent);
> > + drm_err(crtc->dev,
> > + "[CRTC:%d:%s]: failed to get parent device RPM sync\n",
> > + crtc->base.id, crtc->name);
> > + }
> > +}
> > +
> > +static void dpu_crtc_pm_runtime_put(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + int ret;
> > +
> > + ret = pm_runtime_put(dpu_crtc->dev->parent);
> > + if (ret < 0) {
> > + drm_err(crtc->dev,
> > + "[CRTC:%d:%s]: failed to put parent device RPM\n",
> > + crtc->base.id, crtc->name);
> > + }
> > +}
> > +
> > +static void dpu_crtc_mode_set_nofb(struct drm_crtc *crtc)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + struct drm_display_mode *adj = &crtc->state->adjusted_mode;
> > + enum dpu_link_id cf_link;
> > +
> > + dpu_crtc_dbg(crtc, "mode " DRM_MODE_FMT "\n", DRM_MODE_ARG(adj));
> > +
> > + /* request power-on when we start to set mode for CRTC */
> > + dpu_crtc_pm_runtime_get_sync(crtc);
> > +
> > + dpu_fg_displaymode(dpu_crtc->fg, FG_DM_SEC_ON_TOP);
> > + dpu_fg_panic_displaymode(dpu_crtc->fg, FG_DM_CONSTCOL);
> > + dpu_fg_cfg_videomode(dpu_crtc->fg, adj);
> > +
> > + dpu_tcon_cfg_videomode(dpu_crtc->tcon, adj);
> > + dpu_tcon_set_fmt(dpu_crtc->tcon);
> > +
> > + dpu_cf_framedimensions(dpu_crtc->cf_cont,
> > + adj->crtc_hdisplay, adj->crtc_vdisplay);
> > + dpu_cf_framedimensions(dpu_crtc->cf_safe,
> > + adj->crtc_hdisplay, adj->crtc_vdisplay);
> > + /* constframe in content stream shows black frame - CRTC background */
> > + dpu_cf_constantcolor_black(dpu_crtc->cf_cont);
> > + /* constframe in safety stream shows blue frame */
> > + dpu_cf_constantcolor_blue(dpu_crtc->cf_safe);
> > +
> > + cf_link = dpu_cf_get_link_id(dpu_crtc->cf_safe);
> > + dpu_ed_pec_src_sel(dpu_crtc->ed_safe, cf_link);
> > +
> > + cf_link = dpu_cf_get_link_id(dpu_crtc->cf_cont);
> > + dpu_ed_pec_src_sel(dpu_crtc->ed_cont, cf_link);
> > +}
> > +
> > +static int dpu_crtc_atomic_check_gamma(struct drm_crtc *crtc,
> > + struct drm_crtc_state *state)
> > +{
> > + size_t lut_size;
> > +
> > + if (!state->color_mgmt_changed || !state->gamma_lut)
> > + return 0;
> > +
> > + if (crtc->state->gamma_lut &&
> > + (crtc->state->gamma_lut->base.id == state->gamma_lut->base.id))
> > + return 0;
> > +
> > + if (state->gamma_lut->length % sizeof(struct drm_color_lut)) {
> > + dpu_crtc_dbg(crtc, "wrong gamma_lut length\n");
> > + return -EINVAL;
> > + }
> > +
> > + lut_size = state->gamma_lut->length / sizeof(struct drm_color_lut);
> > + if (lut_size != 256) {
> > + dpu_crtc_dbg(crtc, "gamma_lut size is not 256\n");
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_crtc_state *crtc_state;
> > + int ret;
> > +
> > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> > +
> > + ret = dpu_crtc_atomic_check_gamma(crtc, crtc_state);
> > + if (ret)
> > + return ret;
> > +
> > + /* force a mode set if the CRTC is changed to active */
> > + if (crtc_state->active_changed && crtc_state->active) {
> > + /*
> > + * If mode_changed is set by us, call
> > + * drm_atomic_helper_check_modeset() as it's Kerneldoc requires.
> > + */
> > + if (!crtc_state->mode_changed) {
> > + crtc_state->mode_changed = true;
> > +
> > + ret = drm_atomic_helper_check_modeset(crtc->dev, state);
> > + if (ret)
> > + return ret;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void dpu_crtc_atomic_begin(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_crtc_state *old_crtc_state;
> > + struct drm_atomic_state *old_state;
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + struct drm_plane *plane;
> > + struct drm_plane_state *old_plane_state;
> > + struct dpu_plane_state *old_dpstate;
> > + struct dpu_fetchunit *fu;
> > + const struct dpu_fetchunit_ops *fu_ops;
> > + enum dpu_link_id cf_link;
> > + int i;
> > +
> > + old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
> > + old_state = old_crtc_state->state;
> > +
> > + /* do nothing if planes keep being disabled */
> > + if (old_crtc_state->plane_mask == 0 && crtc->state->plane_mask == 0)
> > + return;
> > +
> > + /* request power-on when any plane starts to be active */
> > + if (old_crtc_state->plane_mask == 0 && crtc->state->plane_mask != 0)
> > + dpu_crtc_pm_runtime_get_sync(crtc);
> > +
> > + /*
> > + * Disable relevant planes' resources in SHADOW only.
> > + * Whether any of them would be disabled or kept running depends
> > + * on new plane states in the new global atomic state.
> > + */
> > + for_each_old_plane_in_state(old_state, plane, old_plane_state, i) {
> > + old_dpstate = to_dpu_plane_state(old_plane_state);
> > +
> > + if (!old_plane_state->fb)
> > + continue;
> > +
> > + if (old_plane_state->crtc != crtc)
> > + continue;
> > +
> > + fu = old_dpstate->source;
> > +
> > + fu_ops = dpu_fu_get_ops(fu);
> > +
> > + fu_ops->disable_src_buf(fu);
> > +
> > + if (old_dpstate->is_top) {
> > + cf_link = dpu_cf_get_link_id(dpu_crtc->cf_cont);
> > + dpu_ed_pec_src_sel(dpu_crtc->ed_cont, cf_link);
> > + }
> > + }
> > +}
> > +
> > +static void dpu_crtc_set_gammacor(struct dpu_crtc *dpu_crtc)
> > +{
> > + struct drm_crtc *crtc = &dpu_crtc->base;
> > + struct drm_color_lut *lut;
> > +
> > + lut = (struct drm_color_lut *)crtc->state->gamma_lut->data;
> > +
> > + dpu_gc_enable_rgb_write(dpu_crtc->gc);
> > + dpu_gc_mode(dpu_crtc->gc, GC_GAMMACOR);
> > +
> > + dpu_gc_start_rgb(dpu_crtc->gc, lut);
> > + dpu_gc_delta_rgb(dpu_crtc->gc, lut);
> > +}
> > +
> > +static void dpu_crtc_set_gammacor_sync(struct dpu_crtc *dpu_crtc)
> > +{
> > + struct drm_crtc *crtc = &dpu_crtc->base;
> > +
> > + enable_irq(dpu_crtc->dec_shdld_irq);
> > +
> > + dpu_crtc_set_gammacor(dpu_crtc);
> > + dpu_fg_shdtokgen(dpu_crtc->fg);
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(dec_shdld_done);
> > +
> > + disable_irq(dpu_crtc->dec_shdld_irq);
> > +}
> > +
> > +static void dpu_crtc_disable_gammacor(struct dpu_crtc *dpu_crtc)
> > +{
> > + dpu_gc_mode(dpu_crtc->gc, GC_NEUTRAL);
> > + dpu_gc_disable_rgb_write(dpu_crtc->gc);
> > +}
> > +
> > +static void dpu_crtc_disable_gammacor_sync(struct dpu_crtc *dpu_crtc)
> > +{
> > + struct drm_crtc *crtc = &dpu_crtc->base;
> > +
> > + enable_irq(dpu_crtc->dec_shdld_irq);
> > +
> > + dpu_crtc_disable_gammacor(dpu_crtc);
> > + dpu_fg_shdtokgen(dpu_crtc->fg);
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(dec_shdld_done);
> > +
> > + disable_irq(dpu_crtc->dec_shdld_irq);
> > +}
> > +
> > +static void dpu_crtc_atomic_flush(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_crtc_state *old_crtc_state;
> > + struct drm_atomic_state *old_state;
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + struct drm_plane *plane;
> > + struct drm_plane_state *old_plane_state;
> > + struct dpu_plane_state *old_dpstate;
> > + struct dpu_fetchunit *fu;
> > + struct dpu_dprc *dprc;
> > + const struct dpu_fetchunit_ops *fu_ops;
> > + bool need_modeset = drm_atomic_crtc_needs_modeset(crtc->state);
> > + unsigned long flags;
> > + int i;
> > +
> > + old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
> > + old_state = old_crtc_state->state;
> > +
> > + if (old_crtc_state->plane_mask == 0 && crtc->state->plane_mask == 0) {
> > + /* Queue a pending vbl event if necessary. */
> > + if (!need_modeset && crtc->state->active)
> > + dpu_crtc_queue_state_event(crtc);
> > + return;
> > + }
> > +
> > + if (!need_modeset && crtc->state->active)
> > + enable_irq(dpu_crtc->ed_cont_shdld_irq);
> > +
> > + /*
> > + * Don't relinquish CPU until DPRC repeat_en is disabled
> > + * and flush is done(if necessary).
> > + */
> > + local_irq_save(flags);
> > + preempt_disable();
> > +
> > + /*
> > + * Scan over old plane fetchunits to determine if we
> > + * need to wait for FrameGen frame counter moving in
> > + * the next loop prior to DPRC repeat_en disablement
> > + * or not.
> > + */
> > + for_each_old_plane_in_state(old_state, plane, old_plane_state, i) {
> > + old_dpstate = to_dpu_plane_state(old_plane_state);
> > +
> > + if (!old_plane_state->fb)
> > + continue;
> > +
> > + if (old_plane_state->crtc != crtc)
> > + continue;
> > +
> > + fu = old_dpstate->source;
> > +
> > + fu_ops = dpu_fu_get_ops(fu);
> > +
> > + /*
> > + * Sync with FrameGen frame counter moving so that
> > + * we may disable DPRC repeat_en correctly.
> > + */
> > + if (!fu_ops->is_enabled(fu) && !need_modeset &&
> > + old_crtc_state->active) {
> > + DPU_CRTC_WAIT_FOR_FRAMEGEN_FRAME_CNT_MOVING(dpu_crtc->fg);
> > + break;
> > + }
> > + }
> > +
> > + /*
> > + * Set no stream id for disabled fetchunits of relevant planes.
> > + * Also, disable DPRC repeat_en if necessary.
> > + */
> > + for_each_old_plane_in_state(old_state, plane, old_plane_state, i) {
> > + old_dpstate = to_dpu_plane_state(old_plane_state);
> > +
> > + if (!old_plane_state->fb)
> > + continue;
> > +
> > + if (old_plane_state->crtc != crtc)
> > + continue;
> > +
> > + fu = old_dpstate->source;
> > +
> > + fu_ops = dpu_fu_get_ops(fu);
> > +
> > + if (!fu_ops->is_enabled(fu)) {
> > + fu_ops->set_no_stream_id(fu);
> > +
> > + dprc = fu_ops->get_dprc(fu);
> > + dpu_dprc_disable_repeat_en(dprc);
> > + }
> > + }
> > +
> > + if (!need_modeset && crtc->state->active) {
> > + /*
> > + * Flush plane(s) update out to display & queue a pending
> > + * vbl event if necessary.
> > + */
> > + dpu_ed_pec_sync_trigger(dpu_crtc->ed_cont);
> > +
> > + local_irq_restore(flags);
> > + preempt_enable();
> > +
> > + if (old_crtc_state->gamma_lut && !crtc->state->gamma_lut)
> > + dpu_crtc_disable_gammacor_sync(dpu_crtc);
> > + else if (old_crtc_state->gamma_lut && crtc->state->gamma_lut &&
> > + old_crtc_state->gamma_lut->base.id !=
> > + crtc->state->gamma_lut->base.id)
> > + dpu_crtc_set_gammacor_sync(dpu_crtc);
> > +
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(ed_cont_shdld_done);
> > +
> > + disable_irq(dpu_crtc->ed_cont_shdld_irq);
> > +
> > + DPU_CRTC_CHECK_FRAMEGEN_FIFO(dpu_crtc->fg);
> > +
> > + dpu_crtc_queue_state_event(crtc);
> > + } else {
> > + /*
> > + * Simply flush and hope that any update takes effect
> > + * if CRTC is disabled. This helps for the case where
> > + * migrating plane(s) from a disabled CRTC to the other
> > + * CRTC.
> > + */
> > + if (!crtc->state->active)
> > + dpu_ed_pec_sync_trigger(dpu_crtc->ed_cont);
> > +
> > + local_irq_restore(flags);
> > + preempt_enable();
> > + }
> > +
> > + /* request power-off when all planes are off */
> > + if (old_crtc_state->plane_mask != 0 && crtc->state->plane_mask == 0)
> > + dpu_crtc_pm_runtime_put(crtc);
> > +}
> > +
> > +static void dpu_crtc_atomic_enable(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + unsigned long flags;
> > +
> > + drm_crtc_vblank_on(crtc);
> > +
> > + enable_irq(dpu_crtc->dec_shdld_irq);
> > + enable_irq(dpu_crtc->ed_cont_shdld_irq);
> > + enable_irq(dpu_crtc->ed_safe_shdld_irq);
> > +
> > + dpu_fg_enable_clock(dpu_crtc->fg);
> > + dpu_ed_pec_sync_trigger(dpu_crtc->ed_cont);
> > + dpu_ed_pec_sync_trigger(dpu_crtc->ed_safe);
> > + if (crtc->state->gamma_lut)
> > + dpu_crtc_set_gammacor(dpu_crtc);
> > + else
> > + dpu_crtc_disable_gammacor(dpu_crtc);
> > + dpu_fg_shdtokgen(dpu_crtc->fg);
> > +
> > + /* don't relinquish CPU until TCON is set to operation mode */
> > + local_irq_save(flags);
> > + preempt_disable();
> > + dpu_fg_enable(dpu_crtc->fg);
> > +
> > + /*
> > + * TKT320590:
> > + * Turn TCON into operation mode as soon as the first dumb
> > + * frame is generated by DPU(we don't relinquish CPU to ensure
> > + * this). This makes DPR/PRG be able to evade the frame.
> > + */
> > + DPU_CRTC_WAIT_FOR_FRAMEGEN_FRAME_CNT_MOVING(dpu_crtc->fg);
> > + dpu_tcon_set_operation_mode(dpu_crtc->tcon);
> > + local_irq_restore(flags);
> > + preempt_enable();
> > +
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(ed_safe_shdld_done);
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(ed_cont_shdld_done);
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(dec_shdld_done);
> > +
> > + disable_irq(dpu_crtc->ed_safe_shdld_irq);
> > + disable_irq(dpu_crtc->ed_cont_shdld_irq);
> > + disable_irq(dpu_crtc->dec_shdld_irq);
> > +
> > + DPU_CRTC_WAIT_FOR_FRAMEGEN_SECONDARY_SYNCUP(dpu_crtc->fg);
> > +
> > + DPU_CRTC_CHECK_FRAMEGEN_FIFO(dpu_crtc->fg);
> > +
> > + dpu_crtc_queue_state_event(crtc);
> > +}
> > +
> > +static void dpu_crtc_atomic_disable(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + struct drm_plane *plane;
> > + struct drm_plane_state *old_plane_state;
> > + struct dpu_plane_state *old_dpstate;
> > + struct dpu_fetchunit *fu;
> > + struct dpu_dprc *dprc;
> > + const struct dpu_fetchunit_ops *fu_ops;
> > + unsigned long flags;
> > + int i;
> > +
> > + enable_irq(dpu_crtc->dec_seq_complete_irq);
> > +
> > + /* don't relinquish CPU until DPRC repeat_en is disabled */
> > + local_irq_save(flags);
> > + preempt_disable();
> > + /*
> > + * Sync to FrameGen frame counter moving so that
> > + * FrameGen can be disabled in the next frame.
> > + */
> > + DPU_CRTC_WAIT_FOR_FRAMEGEN_FRAME_CNT_MOVING(dpu_crtc->fg);
> > + dpu_fg_disable(dpu_crtc->fg);
> > + /*
> > + * There is one frame leftover after FrameGen disablement.
> > + * Sync to FrameGen frame counter moving so that
> > + * DPRC repeat_en can be disabled in the next frame.
> > + */
> > + DPU_CRTC_WAIT_FOR_FRAMEGEN_FRAME_CNT_MOVING(dpu_crtc->fg);
> > +
> > + for_each_old_plane_in_state(state, plane, old_plane_state, i) {
> > + old_dpstate = to_dpu_plane_state(old_plane_state);
> > +
> > + if (!old_plane_state->fb)
> > + continue;
> > +
> > + if (old_plane_state->crtc != crtc)
> > + continue;
> > +
> > + fu = old_dpstate->source;
> > +
> > + fu_ops = dpu_fu_get_ops(fu);
> > +
> > + dprc = fu_ops->get_dprc(fu);
> > + dpu_dprc_disable_repeat_en(dprc);
> > + }
> > +
> > + local_irq_restore(flags);
> > + preempt_enable();
> > +
> > + DPU_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(dec_seq_complete_done);
> > +
> > + disable_irq(dpu_crtc->dec_seq_complete_irq);
> > +
> > + dpu_fg_disable_clock(dpu_crtc->fg);
> > +
> > + drm_crtc_vblank_off(crtc);
> > +
> > + spin_lock_irq(&crtc->dev->event_lock);
> > + if (crtc->state->event && !crtc->state->active) {
> > + drm_crtc_send_vblank_event(crtc, crtc->state->event);
> > + crtc->state->event = NULL;
> > + }
> > + spin_unlock_irq(&crtc->dev->event_lock);
> > +
> > + /* request power-off when CRTC is disabled */
> > + dpu_crtc_pm_runtime_put(crtc);
> > +}
> > +
> > +static bool dpu_crtc_get_scanout_position(struct drm_crtc *crtc,
> > + bool in_vblank_irq,
> > + int *vpos, int *hpos,
> > + ktime_t *stime, ktime_t *etime,
> > + const struct drm_display_mode *mode)
> > +{
> > + struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> > + int vdisplay = mode->crtc_vdisplay;
> > + int vtotal = mode->crtc_vtotal;
> > + int line;
> > + bool reliable;
> > +
> > + if (stime)
> > + *stime = ktime_get();
> > +
> > + if (pm_runtime_active(dpu_crtc->dev->parent)) {
> > + /* line index starts with 0 for the first active output line */
> > + line = dpu_fg_get_line_index(dpu_crtc->fg);
> > +
> > + if (line < vdisplay)
> > + /* active scanout area - positive */
> > + *vpos = line + 1;
> > + else
> > + /* inside vblank - negative */
> > + *vpos = line - (vtotal - 1);
> > +
> > + reliable = true;
> > + } else {
> > + *vpos = 0;
> > + reliable = false;
> > + }
> > +
> > + *hpos = 0;
> > +
> > + if (etime)
> > + *etime = ktime_get();
> > +
> > + return reliable;
> > +}
> > +
> > +static const struct drm_crtc_helper_funcs dpu_helper_funcs = {
> > + .mode_valid = dpu_crtc_mode_valid,
> > + .mode_set_nofb = dpu_crtc_mode_set_nofb,
> > + .atomic_check = dpu_crtc_atomic_check,
> > + .atomic_begin = dpu_crtc_atomic_begin,
> > + .atomic_flush = dpu_crtc_atomic_flush,
> > + .atomic_enable = dpu_crtc_atomic_enable,
> > + .atomic_disable = dpu_crtc_atomic_disable,
> > + .get_scanout_position = dpu_crtc_get_scanout_position,
> > +};
> > +
> > +static void dpu_crtc_put_resources(struct dpu_crtc *dpu_crtc)
> > +{
> > +#define DPU_CRTC_PUT_RSC(unit) \
> > +do { \
> > + if (!IS_ERR_OR_NULL(dpu_crtc->unit)) \
> > + dpu_##unit##_put(dpu_crtc->unit); \
> > +} while (0)
> > +
> > + DPU_CRTC_PUT_RSC(cf_cont);
> > + DPU_CRTC_PUT_RSC(cf_safe);
> > + DPU_CRTC_PUT_RSC(dec);
> > + DPU_CRTC_PUT_RSC(ed_cont);
> > + DPU_CRTC_PUT_RSC(ed_safe);
> > + DPU_CRTC_PUT_RSC(fg);
> > + DPU_CRTC_PUT_RSC(gc);
> > + DPU_CRTC_PUT_RSC(tcon);
> > +}
>
> Here you could call the dpu_*_put() functions directly and add the
> IS_ERR_OR_NULL() check at the beginning of the put() function itself.
Will do.
>
> > +
> > +static int dpu_crtc_get_resources(struct dpu_crtc *dpu_crtc)
> > +{
> > + struct dpu_soc *dpu = dev_get_drvdata(dpu_crtc->dev->parent);
> > + int ret = 0;
> > +
> > +#define DPU_CRTC_GET_RSC(unit) \
> > +do { \
> > + dpu_crtc->unit = dpu_##unit##_get(dpu, dpu_crtc->stream_id); \
> > + if (IS_ERR(dpu_crtc->unit)) { \
> > + ret = PTR_ERR(dpu_crtc->unit); \
> > + goto err_out; \
> > + } \
> > +} while (0)
> > +
> > + DPU_CRTC_GET_RSC(cf_cont);
> > + DPU_CRTC_GET_RSC(cf_safe);
> > + DPU_CRTC_GET_RSC(dec);
> > + DPU_CRTC_GET_RSC(ed_cont);
> > + DPU_CRTC_GET_RSC(ed_safe);
> > + DPU_CRTC_GET_RSC(fg);
> > + DPU_CRTC_GET_RSC(gc);
> > + DPU_CRTC_GET_RSC(tcon);
>
> This above could be rewritten like:
>
> ~~~
> int i;
> struct {
> void **dpu_unit;
> void *(*get)(struct dpu_soc *dpu, unsigned int id);
> } rsc[] = {
> {(void *) &dpu_crtc->cf_cont, (void *) dpu_cf_cont_get},
> {(void *) &dpu_crtc->cf_safe, (void *) dpu_cf_safe_get},
> ...
> };
>
> for (i = 0; i < ARRAY_SIZE(rsc); i++) {
> *rsc[i].dpu_unit = rsc[i].get(dpu, dpu_crtc->stream_id);
>
> if (IS_ERR(*rsc[i].dpu_unit)) {
> ret = PTR_ERR(*rsc[i].dpu_unit);
> goto err_out;
> }
> }
> ~~~
>
> I believe this should achieve the same result, but without macros.
Will do.
>
> > +
> > + return ret;
> > +err_out:
> > + dpu_crtc_put_resources(dpu_crtc);
> > +
> > + return ret;
> > +}
> > +
> > +static int dpu_crtc_init(struct dpu_crtc *dpu_crtc,
> > + struct dpu_client_platformdata *pdata,
> > + struct dpu_drm_device *dpu_drm)
> > +{
> > + struct drm_device *drm = &dpu_drm->base;
> > + struct dpu_soc *dpu = dev_get_drvdata(dpu_crtc->dev->parent);
> > + struct drm_crtc *crtc = &dpu_crtc->base;
> > + struct dpu_plane *dpu_plane;
> > + struct dpu_crtc_grp *crtc_grp = pdata->crtc_grp;
> > + struct dpu_plane_grp *plane_grp = crtc_grp->plane_grp;
> > + unsigned int stream_id = pdata->stream_id;
> > + unsigned int crtc_cnt;
> > + int i, ret;
> > +
> > + init_completion(&dpu_crtc->dec_seq_complete_done);
> > + init_completion(&dpu_crtc->dec_shdld_done);
> > + init_completion(&dpu_crtc->ed_cont_shdld_done);
> > + init_completion(&dpu_crtc->ed_safe_shdld_done);
> > +
> > + dpu_crtc->grp = crtc_grp;
> > + dpu_crtc->stream_id = stream_id;
> > + dpu_crtc->hw_plane_cnt = plane_grp->hw_plane_cnt;
> > +
> > + ret = dpu_crtc_get_resources(dpu_crtc);
> > + if (ret) {
> > + drm_err(drm, "failed to get HW resources for CRTC: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + plane_grp->cf[stream_id] = dpu_crtc->cf_cont;
> > + plane_grp->ed[stream_id] = dpu_crtc->ed_cont;
> > +
> > + /* each CRTC has a primary plane */
> > + dpu_plane = dpu_plane_initialize(drm, 0, plane_grp,
> > + DRM_PLANE_TYPE_PRIMARY);
> > + if (IS_ERR(dpu_plane)) {
> > + ret = PTR_ERR(dpu_plane);
> > + drm_err(drm, "failed to init primary plane: %d\n", ret);
> > + goto err_put_resources;
> > + }
> > +
> > + drm_crtc_helper_add(crtc, &dpu_helper_funcs);
> > +
> > + ret = drm_crtc_init_with_planes(drm, crtc, &dpu_plane->base,
> > + NULL, &dpu_crtc_funcs, NULL);
> > + if (ret) {
> > + drm_err(drm, "failed to add CRTC: %d\n", ret);
> > + goto err_put_resources;
> > + }
> > +
> > + /* X server assumes 256 element gamma table so let's use that. */
> > + ret = drm_mode_crtc_set_gamma_size(crtc, 256);
> > + if (ret) {
> > + drm_err(drm, "failed to set CRTC gamma size: %d\n", ret);
> > + goto err_put_resources;
> > + }
> > +
> > + drm_crtc_enable_color_mgmt(crtc, 0, false, 256);
> > +
> > + dpu_crtc->encoder->possible_crtcs = drm_crtc_mask(crtc);
> > + crtc_grp->crtc_mask |= drm_crtc_mask(crtc);
> > + crtc_cnt = hweight32(crtc_grp->crtc_mask);
> > +
> > + /* initialize shared overlay planes for CRTCs in a CRTC group */
> > + if (crtc_cnt == DPU_CRTC_CNT_IN_GRP) {
> > + /*
> > + * All HW planes in a plane group are shared by CRTCs in a
> > + * CRTC group. They will be assigned to either primary plane
> > + * or overlay plane dynamically in runtime. Considering a
> > + * CRTC consumes all HW planes and primary plane takes one
> > + * HW plane, so overlay plane count for a CRTC group should
> > + * be plane_grp->hw_plane_cnt - 1.
> > + */
> > + for (i = 1; i < plane_grp->hw_plane_cnt; i++) {
> > + dpu_plane =
> > + dpu_plane_initialize(drm, crtc_grp->crtc_mask,
> > + plane_grp,
> > + DRM_PLANE_TYPE_OVERLAY);
> > + if (IS_ERR(dpu_plane)) {
> > + ret = PTR_ERR(dpu_plane);
> > + drm_err(drm,
> > + "failed to init overlay plane(%d): %d\n",
> > + i, ret);
> > + goto err_put_resources;
> > + }
> > + }
> > + }
> > +
> > + ret = pm_runtime_get_sync(dpu_crtc->dev->parent);
> > + if (ret < 0) {
> > + pm_runtime_put_noidle(dpu_crtc->dev->parent);
> > + drm_err(drm, "failed to get parent device RPM sync: %d\n", ret);
> > + goto err_put_resources;
> > + }
> > +
> > +#define DPU_CRTC_REQUEST_IRQ(name) \
> > +do { \
> > + dpu_crtc->name##_irq = dpu_map_irq(dpu, pdata->name##_irq); \
> > + irq_set_status_flags(dpu_crtc->name##_irq, IRQ_DISABLE_UNLAZY); \
> > + ret = devm_request_irq(dpu_crtc->dev, dpu_crtc->name##_irq, \
> > + dpu_crtc_##name##_irq_handler, \
> > + 0, dev_name(dpu_crtc->dev), dpu_crtc); \
> > + if (ret < 0) { \
> > + drm_err(drm, "failed to request irq(%u): %d\n", \
> > + dpu_crtc->name##_irq, ret); \
> > + goto err_put_pm_runtime; \
> > + } \
> > + disable_irq(dpu_crtc->name##_irq); \
> > +} while (0)
Will drop this macro and request irqs by going through a local array.
> > +
> > + DPU_CRTC_REQUEST_IRQ(dec_frame_complete);
> > + DPU_CRTC_REQUEST_IRQ(dec_seq_complete);
> > + DPU_CRTC_REQUEST_IRQ(dec_shdld);
> > + DPU_CRTC_REQUEST_IRQ(ed_cont_shdld);
> > + DPU_CRTC_REQUEST_IRQ(ed_safe_shdld);
> > +
> > + ret = pm_runtime_put(dpu_crtc->dev->parent);
> > + if (ret < 0) {
> > + drm_err(drm, "failed to put parent device RPM: %d\n", ret);
> > + dpu_crtc_put_resources(dpu_crtc);
> > + }
> > +
> > + return ret;
> > +
> > +err_put_pm_runtime:
> > + pm_runtime_put(dpu_crtc->dev->parent);
> > +err_put_resources:
> > + dpu_crtc_put_resources(dpu_crtc);
> > +
> > + return ret;
> > +}
> > +
> > +static int dpu_crtc_bind(struct device *dev, struct device *master, void *data)
> > +{
> > + struct dpu_client_platformdata *pdata = dev->platform_data;
> > + struct dpu_drm_device *dpu_drm = data;
> > + struct dpu_crtc *dpu_crtc;
> > + bool found = false;
> > + int ret;
> > +
> > + list_for_each_entry(dpu_crtc, &dpu_drm->crtc_list, node) {
> > + if (dpu_crtc->np == dev->of_node) {
> > + found = true;
> > + break;
> > + }
> > + }
> > +
> > + if (!found) {
> > + drm_err(&dpu_drm->base, "failed to find CRTC OF node\n");
> > + return -ENODEV;
> > + }
> > +
> > + dpu_crtc->dev = dev;
> > +
> > + ret = dpu_crtc_init(dpu_crtc, pdata, dpu_drm);
> > + if (ret)
> > + return ret;
> > +
> > + dev_set_drvdata(dev, dpu_crtc);
> > +
> > + return ret;
> > +}
> > +
> > +static void dpu_crtc_unbind(struct device *dev, struct device *master,
> > + void *data)
> > +{
> > + struct dpu_crtc *dpu_crtc = dev_get_drvdata(dev);
> > +
> > + dpu_crtc_put_resources(dpu_crtc);
> > +}
> > +
> > +static const struct component_ops dpu_crtc_ops = {
> > + .bind = dpu_crtc_bind,
> > + .unbind = dpu_crtc_unbind,
> > +};
> > +
> > +static int dpu_crtc_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > +
> > + if (!dev->platform_data)
> > + return -EINVAL;
> > +
> > + return component_add(dev, &dpu_crtc_ops);
> > +}
> > +
> > +static int dpu_crtc_remove(struct platform_device *pdev)
> > +{
> > + component_del(&pdev->dev, &dpu_crtc_ops);
> > + return 0;
> > +}
> > +
> > +struct platform_driver dpu_crtc_driver = {
> > + .driver = {
> > + .name = "imx-dpu-crtc",
> > + },
> > + .probe = dpu_crtc_probe,
> > + .remove = dpu_crtc_remove,
> > +};
>
> [...]
>
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-dprc.c b/drivers/gpu/drm/imx/dpu/dpu-dprc.c
> > new file mode 100644
> > index 00000000..a543d0f
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-dprc.c
>
> [...]
>
> > +
> > +bool dpu_dprc_rtram_width_supported(struct dpu_dprc *dprc, unsigned int width)
> > +{
> > + if (width > DPU_DPRC_MAX_RTRAM_WIDTH)
> > + return false;
> > +
> > + return true;
>
> You can just 'return width < DPU_DPRC_MAX_RTRAM_WIDTH' here.
Will use 'return width <= DPU_DPRC_MAX_RTRAM_WIDTH;'.
>
> [...]
>
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-drv.c b/drivers/gpu/drm/imx/dpu/dpu-drv.c
> > new file mode 100644
> > index 00000000..e85c4ec
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-drv.c
> > @@ -0,0 +1,297 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +/*
> > + * Copyright 2019,2020 NXP
> > + */
> > +
> > +#include <linux/component.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_drv.h>
> > +#include <drm/drm_fb_helper.h>
> > +#include <drm/drm_gem_cma_helper.h>
> > +#include <drm/drm_modeset_helper.h>
> > +#include <drm/drm_of.h>
> > +#include <drm/drm_print.h>
> > +#include <drm/drm_probe_helper.h>
> > +#include <drm/drm_vblank.h>
>
> I didn't see any vblank related function called in dpu-drv.c. You could
> remove drm_vblank.h.
Will do.
>
> > +
> > +#include "dpu-drv.h"
> > +#include "dpu-kms.h"
> > +
> > +#define DRIVER_NAME "imx-dpu-drm"
>
> [...]
>
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-kms.c b/drivers/gpu/drm/imx/dpu/dpu-kms.c
> > new file mode 100644
> > index 00000000..876a7bb
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-kms.c
>
> [...]
>
> > +
> > +static int dpu_kms_init_encoder_per_crtc(struct drm_device *drm,
> > + struct dpu_crtc *dpu_crtc)
> > +{
> > + struct drm_encoder *encoder = dpu_crtc->encoder;
> > + struct drm_bridge *bridge;
> > + struct drm_connector *connector;
> > + struct device_node *ep, *remote;
> > + int ret = 0;
> > +
> > + ep = of_get_next_child(dpu_crtc->np, NULL);
> > + if (!ep) {
> > + drm_err(drm, "failed to find CRTC port's endpoint\n");
> > + return -ENODEV;
> > + }
> > +
> > + remote = of_graph_get_remote_port_parent(ep);
> > + if (!remote || !of_device_is_available(remote))
> > + goto out;
> > + else if (!of_device_is_available(remote->parent))
> > + goto out;
> > +
> > + bridge = of_drm_find_bridge(remote);
> > + if (!bridge) {
> > + ret = -EPROBE_DEFER;
> > + drm_dbg_kms(drm, "CRTC(%pOF) failed to find bridge: %d\n",
> > + dpu_crtc->np, ret);
> > + goto out;
> > + }
> > +
> > + ret = drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_NONE);
> > + if (ret) {
> > + drm_err(drm, "failed to initialize encoder: %d\n", ret);
> > + goto out;
> > + }
> > +
> > + ret = drm_bridge_attach(encoder, bridge, NULL,
> > + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> > + if (ret) {
> > + drm_err(drm, "failed to attach bridge to encoder: %d\n", ret);
> > + goto out;
> > + }
> > +
> > + connector = drm_bridge_connector_init(drm, encoder);
> > + if (IS_ERR(connector)) {
> > + ret = PTR_ERR(connector);
> > + drm_err(drm,
> > + "failed to initialize bridge connector: %d\n", ret);
> > + goto out;
> > + }
> > +
> > + ret = drm_connector_attach_encoder(connector, encoder);
> > + if (ret) {
> > + drm_err(drm,
> > + "failed to attach encoder to connector: %d\n", ret);
> > + goto out;
>
> You can remove this goto line.
Will do.
>
> > + }
> > +out:
> > + of_node_put(remote);
> > + of_node_put(ep);
> > + return ret;
> > +}
> > +
> > +int dpu_kms_prepare(struct dpu_drm_device *dpu_drm,
> > + struct list_head *crtc_np_list)
> > +{
> > + struct drm_device *drm = &dpu_drm->base;
> > + struct dpu_crtc_of_node *crtc_of_node;
> > + struct dpu_crtc *crtc;
> > + int ret, n_crtc = 0;
> > +
> > + INIT_LIST_HEAD(&dpu_drm->crtc_list);
> > +
> > + list_for_each_entry(crtc_of_node, crtc_np_list, list) {
> > + crtc = drmm_kzalloc(drm, sizeof(*crtc), GFP_KERNEL);
> > + if (!crtc)
> > + return -ENOMEM;
> > +
> > + crtc->np = crtc_of_node->np;
> > +
> > + crtc->encoder = drmm_kzalloc(drm, sizeof(*crtc->encoder),
> > + GFP_KERNEL);
> > + if (!crtc->encoder)
> > + return -ENOMEM;
> > +
> > + list_add(&crtc->node, &dpu_drm->crtc_list);
> > +
> > + n_crtc++;
> > + }
> > +
> > + ret = drmm_mode_config_init(drm);
> > + if (ret)
> > + return ret;
> > +
> > + drm->mode_config.min_width = 60;
> > + drm->mode_config.min_height = 60;
> > + drm->mode_config.max_width = 8192;
> > + drm->mode_config.max_height = 8192;
> > + drm->mode_config.funcs = &dpu_drm_mode_config_funcs;
> > + drm->mode_config.normalize_zpos = true;
> > + drm->max_vblank_count = DPU_FRAMEGEN_MAX_FRAME_INDEX;
> > +
> > + list_for_each_entry(crtc, &dpu_drm->crtc_list, node) {
> > + ret = dpu_kms_init_encoder_per_crtc(drm, crtc);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ret = drm_vblank_init(drm, n_crtc);
> > + if (ret) {
> > + drm_err(drm, "failed to initialize vblank support: %d\n", ret);
> > + return ret;
>
> You can remove this return.
Will do.
>
> > + }
> > +
> > + return ret;
> > +}
>
> [...]
>
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-plane.c b/drivers/gpu/drm/imx/dpu/dpu-plane.c
> > new file mode 100644
> > index 00000000..ce85b9d
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-plane.c
>
> [...]
>
> > +
> > +static int dpu_plane_atomic_check(struct drm_plane *plane,
> > + struct drm_plane_state *state)
> > +{
> > + struct dpu_plane_state *dpstate = to_dpu_plane_state(state);
> > + struct drm_crtc_state *crtc_state;
> > + struct drm_framebuffer *fb = state->fb;
> > + struct dpu_dprc *dprc;
> > + const struct dpu_fetchunit_ops *fu_ops;
> > + dma_addr_t baseaddr, uv_baseaddr;
> > + u32 src_w, src_h, src_x, src_y, dst_w, dst_h;
> > + int min_scale, bpp, ret;
> > + bool fb_is_interlaced;
> > +
> > + /* ok to disable */
> > + if (!fb) {
> > + dpstate->source = NULL;
> > + dpstate->stage.ptr = NULL;
> > + dpstate->blend = NULL;
> > + return 0;
> > + }
> > +
> > + if (!state->crtc) {
> > + dpu_plane_dbg(plane, "no CRTC in plane state\n");
> > + return -EINVAL;
> > + }
> > +
> > + crtc_state =
> > + drm_atomic_get_existing_crtc_state(state->state, state->crtc);
> > + if (WARN_ON(!crtc_state))
> > + return -EINVAL;
> > +
> > + min_scale = FRAC_16_16(1, DPU_PLANE_MAX_PIX_CNT_WITH_SCALER);
> > + ret = drm_atomic_helper_check_plane_state(state, crtc_state,
> > + min_scale,
> > + DRM_PLANE_HELPER_NO_SCALING,
> > + true, false);
> > + if (ret) {
> > + dpu_plane_dbg(plane, "failed to check plane state: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* no off screen */
> > + if (state->dst.x1 < 0 || state->dst.y1 < 0 ||
> > + (state->dst.x2 > crtc_state->adjusted_mode.hdisplay) ||
> > + (state->dst.y2 > crtc_state->adjusted_mode.vdisplay)) {
> > + dpu_plane_dbg(plane, "no off screen\n");
> > + return -EINVAL;
> > + }
> > +
> > + fb_is_interlaced = !!(fb->flags & DRM_MODE_FB_INTERLACED);
> > +
> > + src_w = drm_rect_width(&state->src) >> 16;
> > + src_h = drm_rect_height(&state->src) >> 16;
> > + src_x = state->src.x1 >> 16;
> > + src_y = state->src.y1 >> 16;
> > + dst_w = drm_rect_width(&state->dst);
> > + dst_h = drm_rect_height(&state->dst);
> > +
> > + /* max source resolution check */
> > + if (src_w == dst_w || src_h == dst_h) {
> > + /* without scaling */
> > + if (src_w > DPU_PLANE_MAX_PIX_CNT ||
> > + src_h > DPU_PLANE_MAX_PIX_CNT) {
> > + dpu_plane_dbg(plane, "invalid source resolution\n");
> > + return -EINVAL;
> > + }
> > + } else {
> > + /* with scaling */
> > + if (src_w > DPU_PLANE_MAX_PIX_CNT_WITH_SCALER ||
> > + src_h > DPU_PLANE_MAX_PIX_CNT_WITH_SCALER) {
> > + dpu_plane_dbg(plane,
> > + "invalid source resolution with scale\n");
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + /* pixel/line count and position parameters check */
> > + if (fb->format->hsub == 2) {
> > + if (src_w % 2) {
> > + dpu_plane_dbg(plane, "bad uv width\n");
> > + return -EINVAL;
> > + }
> > + if (src_x % 2) {
> > + dpu_plane_dbg(plane, "bad uv xoffset\n");
> > + return -EINVAL;
> > + }
> > + }
> > + if (fb->format->vsub == 2) {
> > + if (src_h % (fb_is_interlaced ? 4 : 2)) {
> > + dpu_plane_dbg(plane, "bad uv height\n");
> > + return -EINVAL;
> > + }
> > + if (src_y % (fb_is_interlaced ? 4 : 2)) {
> > + dpu_plane_dbg(plane, "bad uv yoffset\n");
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + if ((fb->flags & DRM_MODE_FB_MODIFIERS) &&
> > + !plane->funcs->format_mod_supported(plane, fb->format->format,
> > + fb->modifier)) {
> > + dpu_plane_dbg(plane, "invalid modifier 0x%016llx",
> > + fb->modifier);
> > + return -EINVAL;
> > + }
> > +
> > + /* for tile formats, framebuffer has to be tile aligned */
> > + switch (fb->modifier) {
> > + case DRM_FORMAT_MOD_VIVANTE_TILED:
> > + if (fb->width % 4) {
> > + dpu_plane_dbg(plane, "bad fb width for VIVANTE tile\n");
> > + return -EINVAL;
> > + }
> > + if (fb->height % 4) {
> > + dpu_plane_dbg(plane, "bad fb height for VIVANTE tile\n");
> > + return -EINVAL;
> > + }
> > + break;
> > + case DRM_FORMAT_MOD_VIVANTE_SUPER_TILED:
> > + if (fb->width % 64) {
> > + dpu_plane_dbg(plane,
> > + "bad fb width for VIVANTE super tile\n");
> > + return -EINVAL;
> > + }
> > + if (fb->height % 64) {
> > + dpu_plane_dbg(plane,
> > + "bad fb height for VIVANTE super tile\n");
> > + return -EINVAL;
> > + }
> > + break;
> > + }
> > +
> > + /* do not support BT709 full range */
> > + if (fb->format->is_yuv &&
> > + state->color_encoding == DRM_COLOR_YCBCR_BT709 &&
> > + state->color_range == DRM_COLOR_YCBCR_FULL_RANGE) {
> > + dpu_plane_dbg(plane, "no BT709 full range support\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* base address alignment check */
> > + baseaddr = drm_plane_state_to_baseaddr(state);
> > + switch (fb->format->format) {
> > + case DRM_FORMAT_YUYV:
> > + case DRM_FORMAT_UYVY:
> > + bpp = 16;
> > + break;
> > + case DRM_FORMAT_NV12:
> > + case DRM_FORMAT_NV21:
> > + bpp = 8;
> > + break;
> > + default:
> > + bpp = fb->format->cpp[0] * 8;
> > + break;
> > + }
> > + if (((bpp == 32) && (baseaddr & 0x3)) ||
> > + ((bpp == 16) && (baseaddr & 0x1))) {
> > + dpu_plane_dbg(plane, "%dbpp fb bad baddr alignment\n", bpp);
> > + return -EINVAL;
> > + }
> > + switch (bpp) {
> > + case 32:
> > + if (baseaddr & 0x3) {
> > + dpu_plane_dbg(plane, "32bpp fb bad baddr alignment\n");
> > + return -EINVAL;
> > + }
> > + break;
> > + case 16:
> > + if (fb->modifier) {
> > + if (baseaddr & 0x1) {
> > + dpu_plane_dbg(plane,
> > + "16bpp tile fb bad baddr alignment\n");
> > + return -EINVAL;
> > + }
> > + } else {
> > + if (baseaddr & 0x7) {
> > + dpu_plane_dbg(plane,
> > + "16bpp fb bad baddr alignment\n");
> > + return -EINVAL;
> > + }
> > + }
> > + break;
> > + }
> > +
> > + /* pitches[0] check */
> > + if (fb->pitches[0] > DPU_PLANE_MAX_PITCH) {
> > + dpu_plane_dbg(plane, "fb pitches[0] is out of range\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (((bpp == 32) && (fb->pitches[0] & 0x3)) ||
> > + ((bpp == 16) && (fb->pitches[0] & 0x1))) {
> > + dpu_plane_dbg(plane,
> > + "%dbpp fb bad pitches[0] alignment\n", bpp);
> > + return -EINVAL;
> > + }
> > +
> > + /* UV planar check, assuming 16bpp */
> > + if (fb->format->num_planes > 1) {
> > + /* base address alignment check */
> > + uv_baseaddr = drm_plane_state_to_uvbaseaddr(state);
> > + if (uv_baseaddr & 0x7) {
> > + dpu_plane_dbg(plane, "bad uv baddr alignment\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* pitches[1] check */
> > + if (fb->pitches[1] > DPU_PLANE_MAX_PITCH) {
> > + dpu_plane_dbg(plane, "fb pitches[1] is out of range\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (fb->pitches[1] & 0x1) {
> > + dpu_plane_dbg(plane, "fb bad pitches[1] alignment\n");
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + /* DPRC check */
> > + fu_ops = dpu_fu_get_ops(dpstate->source);
> > + dprc = fu_ops->get_dprc(dpstate->source);
> > +
> > + if (!dpu_dprc_rtram_width_supported(dprc, src_w)) {
> > + dpu_plane_dbg(plane, "bad RTRAM width for DPRC\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (!dpu_dprc_stride_supported(dprc, fb->pitches[0], fb->pitches[1],
> > + src_w, src_x, fb->format, fb->modifier,
> > + baseaddr, uv_baseaddr)) {
> > + dpu_plane_dbg(plane, "bad fb pitches for DPRC\n");
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
>
> This function is huge but it's well structured into logical sections. Why not
> split it into smaller functions?
Will do.
>
> [...]
>
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-prv.h b/drivers/gpu/drm/imx/dpu/dpu-prv.h
> > new file mode 100644
> > index 00000000..9151155
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-prv.h
> > @@ -0,0 +1,203 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +
> > +/*
> > + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> > + * Copyright 2017-2020 NXP
> > + */
> > +
> > +#ifndef __DPU_PRV_H__
> > +#define __DPU_PRV_H__
> > +
> > +#include <linux/clk.h>
> > +#include <linux/device.h>
> > +#include <linux/irqdomain.h>
> > +
> > +#include "dpu.h"
> > +
> > +/* DPU common control registers */
> > +#define DPU_COMCTRL_REG(offset) (offset)
> > +
> > +#define IPIDENTIFIER DPU_COMCTRL_REG(0x0)
> > +#define LOCKUNLOCK DPU_COMCTRL_REG(0x40)
> > +#define LOCKSTATUS DPU_COMCTRL_REG(0x44)
> > +#define USERINTERRUPTMASK(n) DPU_COMCTRL_REG(0x48 + 4 * (n))
> > +#define INTERRUPTENABLE(n) DPU_COMCTRL_REG(0x50 + 4 * (n))
> > +#define INTERRUPTPRESET(n) DPU_COMCTRL_REG(0x58 + 4 * (n))
> > +#define INTERRUPTCLEAR(n) DPU_COMCTRL_REG(0x60 + 4 * (n))
> > +#define INTERRUPTSTATUS(n) DPU_COMCTRL_REG(0x68 + 4 * (n))
> > +#define USERINTERRUPTENABLE(n) DPU_COMCTRL_REG(0x80 + 4 * (n))
> > +#define USERINTERRUPTPRESET(n) DPU_COMCTRL_REG(0x88 + 4 * (n))
> > +#define USERINTERRUPTCLEAR(n) DPU_COMCTRL_REG(0x90 + 4 * (n))
> > +#define USERINTERRUPTSTATUS(n) DPU_COMCTRL_REG(0x98 + 4 * (n))
> > +#define GENERALPURPOSE DPU_COMCTRL_REG(0x100)
> > +
> > +#define DPU_SAFETY_STREAM_OFFSET 4
> > +
> > +/* shadow enable bit for several DPU units */
> > +#define SHDEN BIT(0)
> > +
> > +/* Pixel Engine Configuration register fields */
> > +#define CLKEN_MASK_SHIFT 24
> > +#define CLKEN_MASK (0x3 << CLKEN_MASK_SHIFT)
> > +#define CLKEN(n) ((n) << CLKEN_MASK_SHIFT)
> > +
> > +/* H/Vscaler register fields */
> > +#define SCALE_FACTOR_MASK 0xfffff
> > +#define SCALE_FACTOR(n) ((n) & 0xfffff)
> > +#define PHASE_OFFSET_MASK 0x1fffff
> > +#define PHASE_OFFSET(n) ((n) & 0x1fffff)
> > +#define OUTPUT_SIZE_MASK 0x3fff0000
> > +#define OUTPUT_SIZE(n) ((((n) - 1) << 16) & OUTPUT_SIZE_MASK)
> > +#define FILTER_MODE_MASK 0x100
> > +#define FILTER_MODE(n) ((n) << 8)
> > +#define SCALE_MODE_MASK 0x10
> > +#define SCALE_MODE(n) ((n) << 4)
> > +
> > +enum dpu_irq {
> > + DPU_IRQ_STORE9_SHDLOAD = 0,
> > + DPU_IRQ_STORE9_FRAMECOMPLETE = 1,
> > + DPU_IRQ_STORE9_SEQCOMPLETE = 2,
> > + DPU_IRQ_EXTDST0_SHDLOAD = 3,
> > + DPU_IRQ_EXTDST0_FRAMECOMPLETE = 4,
> > + DPU_IRQ_EXTDST0_SEQCOMPLETE = 5,
> > + DPU_IRQ_EXTDST4_SHDLOAD = 6,
> > + DPU_IRQ_EXTDST4_FRAMECOMPLETE = 7,
> > + DPU_IRQ_EXTDST4_SEQCOMPLETE = 8,
> > + DPU_IRQ_EXTDST1_SHDLOAD = 9,
> > + DPU_IRQ_EXTDST1_FRAMECOMPLETE = 10,
> > + DPU_IRQ_EXTDST1_SEQCOMPLETE = 11,
> > + DPU_IRQ_EXTDST5_SHDLOAD = 12,
> > + DPU_IRQ_EXTDST5_FRAMECOMPLETE = 13,
> > + DPU_IRQ_EXTDST5_SEQCOMPLETE = 14,
> > + DPU_IRQ_DISENGCFG_SHDLOAD0 = 15,
> > + DPU_IRQ_DISENGCFG_FRAMECOMPLETE0 = 16,
> > + DPU_IRQ_DISENGCFG_SEQCOMPLETE0 = 17,
> > + DPU_IRQ_FRAMEGEN0_INT0 = 18,
> > + DPU_IRQ_FRAMEGEN0_INT1 = 19,
> > + DPU_IRQ_FRAMEGEN0_INT2 = 20,
> > + DPU_IRQ_FRAMEGEN0_INT3 = 21,
> > + DPU_IRQ_SIG0_SHDLOAD = 22,
> > + DPU_IRQ_SIG0_VALID = 23,
> > + DPU_IRQ_SIG0_ERROR = 24,
> > + DPU_IRQ_DISENGCFG_SHDLOAD1 = 25,
> > + DPU_IRQ_DISENGCFG_FRAMECOMPLETE1 = 26,
> > + DPU_IRQ_DISENGCFG_SEQCOMPLETE1 = 27,
> > + DPU_IRQ_FRAMEGEN1_INT0 = 28,
> > + DPU_IRQ_FRAMEGEN1_INT1 = 29,
> > + DPU_IRQ_FRAMEGEN1_INT2 = 30,
> > + DPU_IRQ_FRAMEGEN1_INT3 = 31,
> > + DPU_IRQ_SIG1_SHDLOAD = 32,
> > + DPU_IRQ_SIG1_VALID = 33,
> > + DPU_IRQ_SIG1_ERROR = 34,
> > + DPU_IRQ_RESERVED = 35,
> > + DPU_IRQ_CMDSEQ_ERROR = 36,
> > + DPU_IRQ_COMCTRL_SW0 = 37,
> > + DPU_IRQ_COMCTRL_SW1 = 38,
> > + DPU_IRQ_COMCTRL_SW2 = 39,
> > + DPU_IRQ_COMCTRL_SW3 = 40,
> > + DPU_IRQ_FRAMEGEN0_PRIMSYNC_ON = 41,
> > + DPU_IRQ_FRAMEGEN0_PRIMSYNC_OFF = 42,
> > + DPU_IRQ_FRAMEGEN0_SECSYNC_ON = 43,
> > + DPU_IRQ_FRAMEGEN0_SECSYNC_OFF = 44,
> > + DPU_IRQ_FRAMEGEN1_PRIMSYNC_ON = 45,
> > + DPU_IRQ_FRAMEGEN1_PRIMSYNC_OFF = 46,
> > + DPU_IRQ_FRAMEGEN1_SECSYNC_ON = 47,
> > + DPU_IRQ_FRAMEGEN1_SECSYNC_OFF = 48,
> > + DPU_IRQ_COUNT = 49,
> > +};
> > +
> > +enum dpu_unit_type {
> > + DPU_DISP,
> > + DPU_BLIT,
> > +};
> > +
> > +struct dpu_units {
> > + const unsigned int *ids;
> > + const enum dpu_unit_type *types;
> > + const unsigned long *ofss;
> > + const unsigned long *pec_ofss; /* Pixel Engine Configuration */
> > + const unsigned int cnt;
> > +};
> > +
> > +struct dpu_soc {
> > + struct device *dev;
> > +
> > + struct device *pd_dc_dev;
> > + struct device *pd_pll0_dev;
> > + struct device *pd_pll1_dev;
> > + struct device_link *pd_dc_link;
> > + struct device_link *pd_pll0_link;
> > + struct device_link *pd_pll1_link;
> > +
> > + void __iomem *comctrl_reg;
> > +
> > + struct clk *clk_cfg;
> > + struct clk *clk_axi;
> > +
> > + int id;
> > +
> > + int irq_disengcfg_framecomplete0;
> > + int irq_disengcfg_seqcomplete0;
> > + int irq_disengcfg_shdload0;
> > + int irq_disengcfg_framecomplete1;
> > + int irq_disengcfg_seqcomplete1;
> > + int irq_disengcfg_shdload1;
> > + int irq_extdst0_shdload;
> > + int irq_extdst1_shdload;
> > + int irq_extdst4_shdload;
> > + int irq_extdst5_shdload;
> > +
> > + struct irq_domain *domain;
> > +
> > + struct dpu_constframe *cf_priv[4];
> > + struct dpu_disengcfg *dec_priv[2];
> > + struct dpu_extdst *ed_priv[4];
> > + struct dpu_fetchunit *fd_priv[3];
> > + struct dpu_fetchunit *fe_priv[4];
> > + struct dpu_framegen *fg_priv[2];
> > + struct dpu_fetchunit *fl_priv[1];
> > + struct dpu_fetchunit *fw_priv[2];
> > + struct dpu_gammacor *gc_priv[2];
> > + struct dpu_hscaler *hs_priv[3];
> > + struct dpu_layerblend *lb_priv[4];
> > + struct dpu_tcon *tcon_priv[2];
> > + struct dpu_vscaler *vs_priv[3];
> > +};
> > +
> > +#define DECLARE_DPU_UNIT_HW_INIT_FUNC(unit) \
> > +void dpu_##unit##_hw_init(struct dpu_soc *dpu, unsigned int id) \
> > +
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(cf);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(dec);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(ed);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(fd);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(fe);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(fg);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(fl);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(fw);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(gc);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(hs);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(lb);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(tcon);
> > +DECLARE_DPU_UNIT_HW_INIT_FUNC(vs);
>
> Why use macros to declare these functions? It wouldn't make such a big
> difference declaring them explicitly.
I thought there would be some consistency if they can be declared by
using the same pattern as DECLARE_DPU_UNIT_INIT_FUNC() below. Will
declare them directly.
>
> > +
> > +#define DECLARE_DPU_UNIT_INIT_FUNC(unit) \
> > +int dpu_##unit##_init(struct dpu_soc *dpu, unsigned int index, \
> > + unsigned int id, enum dpu_unit_type type, \
> > + unsigned long pec_base, unsigned long base)
> > +
> > +DECLARE_DPU_UNIT_INIT_FUNC(cf);
> > +DECLARE_DPU_UNIT_INIT_FUNC(dec);
> > +DECLARE_DPU_UNIT_INIT_FUNC(ed);
> > +DECLARE_DPU_UNIT_INIT_FUNC(fd);
> > +DECLARE_DPU_UNIT_INIT_FUNC(fe);
> > +DECLARE_DPU_UNIT_INIT_FUNC(fg);
> > +DECLARE_DPU_UNIT_INIT_FUNC(fl);
> > +DECLARE_DPU_UNIT_INIT_FUNC(fw);
> > +DECLARE_DPU_UNIT_INIT_FUNC(gc);
> > +DECLARE_DPU_UNIT_INIT_FUNC(hs);
> > +DECLARE_DPU_UNIT_INIT_FUNC(lb);
> > +DECLARE_DPU_UNIT_INIT_FUNC(tcon);
> > +DECLARE_DPU_UNIT_INIT_FUNC(vs);
>
> Same question goes here.
Each function has quite a few parameters, so it takes much more lines
to declare them directly than by using the marco. Now that ctags +
cscope doesn't do marco expansion, I will declare them directly.
>
> > +
> > +#endif /* __DPU_PRV_H__ */
> > diff --git a/drivers/gpu/drm/imx/dpu/dpu-tcon.c b/drivers/gpu/drm/imx/dpu/dpu-tcon.c
> > new file mode 100644
> > index 00000000..e58dac8
> > --- /dev/null
> > +++ b/drivers/gpu/drm/imx/dpu/dpu-tcon.c
>
> [...]
>
> > +
> > +void dpu_tcon_hw_init(struct dpu_soc *dpu, unsigned int index)
> > +{
> > + struct dpu_tcon *tcon = dpu->tcon_priv[index];
>
> You can safely get rid of this extra variable.
Will do.
Regards,
Liu Ying
>
> Thanks,
> laurentiu
>
> > +
> > + /* reset TCON_CTRL to POR default so that TCON works in bypass mode */
> > + dpu_tcon_write(tcon, TCON_CTRL, CTRL_RST_VAL);
> > +}
> > +
>
Powered by blists - more mailing lists