lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 20 Jan 2021 12:54:10 +0200
From:   Tudor Ambarus <tudor.ambarus@...rochip.com>
To:     <michael@...le.cc>, <vigneshr@...com>
CC:     <miquel.raynal@...tlin.com>, <richard@....at>,
        <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        <Kavyasree.Kotagiri@...rochip.com>,
        Tudor Ambarus <tudor.ambarus@...rochip.com>
Subject: [PATCH 1/2] mtd: spi-nor: Add Global Block Unlock command

The Global Block Unlock command has different names depending
on the manufacturer, but always the same command value: 0x98.
Macronix's MX25U12835F names it Gang Block Unlock, Winbound's
W25Q128FV names it Global Block Unlock and Microchip's
SST26VF064B names it Global Block Protection Unlock.

Used in the Individual Block Protection mode, which is mutual
exclusive with the Block Protection mode (BP0-3).

Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
 drivers/mtd/spi-nor/core.c  | 35 +++++++++++++++++++++++++++++++++++
 drivers/mtd/spi-nor/core.h  |  1 +
 include/linux/mtd/spi-nor.h |  1 +
 3 files changed, 37 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 20df44b753da..cb275608cb7f 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -853,6 +853,41 @@ int spi_nor_wait_till_ready(struct spi_nor *nor)
 						    DEFAULT_READY_WAIT_JIFFIES);
 }
 
+/**
+ * spi_nor_global_block_unlock() - Unlock Global Block Protection.
+ * @nor:	pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_global_block_unlock(struct spi_nor *nor)
+{
+	int ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_GBULK,
+						       NULL, 0);
+	}
+
+	if (ret) {
+		dev_dbg(nor->dev, "error %d on Global Block Unlock\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
 /**
  * spi_nor_write_sr() - Write the Status Register.
  * @nor:	pointer to 'struct spi_nor'.
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index d631ee299de3..eb26796db026 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -434,6 +434,7 @@ int spi_nor_write_disable(struct spi_nor *nor);
 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
 int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
 int spi_nor_wait_till_ready(struct spi_nor *nor);
+int spi_nor_global_block_unlock(struct spi_nor *nor);
 int spi_nor_lock_and_prep(struct spi_nor *nor);
 void spi_nor_unlock_and_unprep(struct spi_nor *nor);
 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index d13958de6d8a..a0d572855444 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -53,6 +53,7 @@
 #define SPINOR_OP_WREAR		0xc5	/* Write Extended Address Register */
 #define SPINOR_OP_SRSTEN	0x66	/* Software Reset Enable */
 #define SPINOR_OP_SRST		0x99	/* Software Reset */
+#define SPINOR_OP_GBULK		0x98    /* Global Block Unlock */
 
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
 #define SPINOR_OP_READ_4B	0x13	/* Read data bytes (low frequency) */
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ