[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210120142217.29652-4-o.rempel@pengutronix.de>
Date: Wed, 20 Jan 2021 15:22:13 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
Robin van der Gracht <robin@...tonic.nl>,
devicetree@...r.kernel.org, Fabio Estevam <festevam@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
dri-devel@...ts.freedesktop.org
Subject: [PATCH v1 3/7] ARM: dts: imx6dl-prtvt7: Add display and panel nodes
Add Innolux G070Y2-T02 panel to the Protonic VT7 board.
Signed-off-by: Robin van der Gracht <robin@...tonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
arch/arm/boot/dts/imx6dl-prtvt7.dts | 47 +++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index ae6da241f13e..d9cb1e41cc10 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -31,6 +31,30 @@ backlight_lcd: backlight-lcd {
enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
};
+ display {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-0 = <&pinctrl_ipu1_disp>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
keys {
compatible = "gpio-keys";
autorepeat;
@@ -138,6 +162,18 @@ led-debug0 {
};
};
+ panel {
+ compatible = "innolux,g070y2-t02";
+ backlight = <&backlight_lcd>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
reg_bl_12v0: regulator-bl-12v0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -149,6 +185,13 @@ reg_bl_12v0: regulator-bl-12v0 {
enable-active-high;
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "1v8";
@@ -260,6 +303,10 @@ &ipu1 {
status = "okay";
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
+
&pwm1 {
#pwm-cells = <2>;
pinctrl-names = "default";
--
2.30.0
Powered by blists - more mailing lists