[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210121182308.16080-3-digetx@gmail.com>
Date: Thu, 21 Jan 2021 21:22:57 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Nicolas Chauvet <kwizart@...il.com>,
Matt Merhar <mattmerhar@...tonmail.com>,
Peter Geis <pgwipeout@...il.com>
Cc: linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v1 02/13] ARM: tegra: ventana: Support CPU thermal throttling
Enable CPU thermal throttling on Tegra20 Ventana board.
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
arch/arm/boot/dts/tegra20-ventana.dts | 41 +++++++++++++++++++++++++--
1 file changed, 39 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 02b94ed722d0..99a356c1ccec 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
#include "tegra20.dtsi"
#include "tegra20-cpu-opp.dtsi"
#include "tegra20-cpu-opp-microvolt.dtsi"
@@ -528,9 +529,10 @@ ldo_rtc {
};
};
- temperature-sensor@4c {
+ nct1008: temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
+ #thermal-sensor-cells = <1>;
};
};
@@ -614,11 +616,13 @@ cpus {
cpu0: cpu@0 {
cpu-supply = <&vdd_cpu>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
cpu-supply = <&vdd_cpu>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
@@ -716,4 +720,37 @@ sound {
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 1>;
+
+ trips {
+ trip0: cpu-alert0 {
+ /* start throttling at 50C */
+ temperature = <50000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: cpu-crit {
+ /* shut down at 60C */
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
--
2.29.2
Powered by blists - more mailing lists