[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210121061141.23062-6-o.rempel@pengutronix.de>
Date: Thu, 21 Jan 2021 07:11:39 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
Robin van der Gracht <robin@...tonic.nl>,
devicetree@...r.kernel.org, Fabio Estevam <festevam@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
dri-devel@...ts.freedesktop.org
Subject: [PATCH v2 5/7] ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
The backlight power is controlled through the reg_bl_12v0 regulator.
Co-Developed-by: Robin van der Gracht <robin@...tonic.nl>
Signed-off-by: Robin van der Gracht <robin@...tonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
arch/arm/boot/dts/imx6dl-prtvt7.dts | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 836026a0e219..8a1491975da8 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -21,14 +21,11 @@ memory@...00000 {
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_backlight>;
pwms = <&pwm1 0 500000>;
brightness-levels = <0 20 81 248 1000>;
default-brightness-level = <20>;
num-interpolated-steps = <21>;
power-supply = <®_bl_12v0>;
- enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
};
display {
@@ -362,12 +359,6 @@ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
>;
};
- pinctrl_backlight: backlightgrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
- >;
- };
-
pinctrl_can1phy: can1phy {
fsl,pins = <
/* CAN1_SR */
--
2.30.0
Powered by blists - more mailing lists