| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1611222152.1561.5.camel@googlemail.com>
Date: Thu, 21 Jan 2021 10:42:32 +0100
From: Christoph Fritz <chf.fritz@...glemail.com>
To: Jagan Teki <jagan@...rulasolutions.com>,
Mark Brown <broonie@...nel.org>
Cc: Adrien Grassein <adrien.grassein@...il.com>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] regulator: pf8x00: Add suspend support
Hello Jagan,
as your new role as Maintainer of this driver, is there a chance to get
your Feedback/Ack/Review/Signed anytime soon?
Thanks
-- Christoph
On Sun, 2021-01-17 at 21:49 +0100, Christoph Fritz wrote:
> This patch adds suspend/resume support so that it is possible to
> configure the LDOs and BUCKs as on or off during suspend phase as
> well as to configure suspend specific voltages.
>
> Signed-off-by: Christoph Fritz <chf.fritz@...glemail.com>
> ---
> drivers/regulator/pf8x00-regulator.c | 75 ++++++++++++++++++++++++++--
> 1 file changed, 70 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
> index 1e5582d73405..02892e04acce 100644
> --- a/drivers/regulator/pf8x00-regulator.c
> +++ b/drivers/regulator/pf8x00-regulator.c
> @@ -125,8 +125,12 @@ enum pf8x00_devid {
> #define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4)
> #define PF8X00_DEVICE_ID_MASK GENMASK(3, 0)
>
> -struct pf8x00_regulator {
> +struct pf8x00_regulator_data {
> struct regulator_desc desc;
> + unsigned int suspend_enable_reg;
> + unsigned int suspend_enable_mask;
> + unsigned int suspend_voltage_reg;
> + unsigned int suspend_voltage_cache;
> };
>
> struct pf8x00_chip {
> @@ -276,6 +280,53 @@ static int pf8x00_of_parse_cb(struct device_node *np,
> return 0;
> }
>
> +static int pf8x00_suspend_enable(struct regulator_dev *rdev)
> +{
> + struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
> + struct regmap *rmap = rdev_get_regmap(rdev);
> +
> + return regmap_update_bits(rmap, regl->suspend_enable_reg,
> + regl->suspend_enable_mask,
> + regl->suspend_enable_mask);
> +}
> +
> +static int pf8x00_suspend_disable(struct regulator_dev *rdev)
> +{
> + struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
> + struct regmap *rmap = rdev_get_regmap(rdev);
> +
> + return regmap_update_bits(rmap, regl->suspend_enable_reg,
> + regl->suspend_enable_mask, 0);
> +}
> +
> +static int pf8x00_set_suspend_voltage(struct regulator_dev *rdev, int uV)
> +{
> + struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
> + int ret;
> +
> + if (regl->suspend_voltage_cache == uV)
> + return 0;
> +
> + ret = regulator_map_voltage_iterate(rdev, uV, uV);
> + if (ret < 0) {
> + dev_err(rdev_get_dev(rdev), "failed to map %i uV\n", uV);
> + return ret;
> + }
> +
> + dev_dbg(rdev_get_dev(rdev), "uV: %i, reg: 0x%x, msk: 0x%x, val: 0x%x\n",
> + uV, regl->suspend_voltage_reg, regl->desc.vsel_mask, ret);
> + ret = regmap_update_bits(rdev->regmap, regl->suspend_voltage_reg,
> + regl->desc.vsel_mask, ret);
> + if (ret < 0) {
> + dev_err(rdev_get_dev(rdev), "failed to set %i uV\n", uV);
> + return ret;
> + }
> +
> + regl->suspend_voltage_cache = uV;
> +
> + return 0;
> +}
> +
> static const struct regulator_ops pf8x00_ldo_ops = {
> .enable = regulator_enable_regmap,
> .disable = regulator_disable_regmap,
> @@ -283,6 +334,9 @@ static const struct regulator_ops pf8x00_ldo_ops = {
> .list_voltage = regulator_list_voltage_table,
> .set_voltage_sel = regulator_set_voltage_sel_regmap,
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_suspend_enable = pf8x00_suspend_enable,
> + .set_suspend_disable = pf8x00_suspend_disable,
> + .set_suspend_voltage = pf8x00_set_suspend_voltage,
> };
>
>
> @@ -295,6 +349,9 @@ static const struct regulator_ops pf8x00_buck1_6_ops = {
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .get_current_limit = regulator_get_current_limit_regmap,
> .set_current_limit = regulator_set_current_limit_regmap,
> + .set_suspend_enable = pf8x00_suspend_enable,
> + .set_suspend_disable = pf8x00_suspend_disable,
> + .set_suspend_voltage = pf8x00_set_suspend_voltage,
> };
>
> static const struct regulator_ops pf8x00_buck7_ops = {
> @@ -306,6 +363,8 @@ static const struct regulator_ops pf8x00_buck7_ops = {
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .get_current_limit = regulator_get_current_limit_regmap,
> .set_current_limit = regulator_set_current_limit_regmap,
> + .set_suspend_enable = pf8x00_suspend_enable,
> + .set_suspend_disable = pf8x00_suspend_disable,
> };
>
> static const struct regulator_ops pf8x00_vsnvs_ops = {
> @@ -337,6 +396,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
> .disable_val = 0x0, \
> .enable_mask = 2, \
> }, \
> + .suspend_enable_reg = (base) + LDO_CONFIG2, \
> + .suspend_enable_mask = 1, \
> + .suspend_voltage_reg = (base) + LDO_STBY_VOLT, \
> }
>
> #define PF8X00BUCK(_id, _name, base, voltages) \
> @@ -367,6 +429,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
> .enable_mask = 0x3, \
> .enable_time = 500, \
> }, \
> + .suspend_enable_reg = (base) + SW_MODE1, \
> + .suspend_enable_mask = 0xc, \
> + .suspend_voltage_reg = (base) + SW_STBY_VOLT, \
> }
>
> #define PF8X00BUCK7(_name, base, voltages) \
> @@ -415,7 +480,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
> }, \
> }
>
> -static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
> +static struct pf8x00_regulator_data pf8x00_regs_data[PF8X00_MAX_REGULATORS] = {
> PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages),
> PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages),
> PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages),
> @@ -500,12 +565,12 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
> if (ret)
> return ret;
>
> - for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) {
> - struct pf8x00_regulator *data = &pf8x00_regulators_data[id];
> + for (id = 0; id < ARRAY_SIZE(pf8x00_regs_data); id++) {
> + struct pf8x00_regulator_data *data = &pf8x00_regs_data[id];
> struct regulator_dev *rdev;
>
> config.dev = chip->dev;
> - config.driver_data = chip;
> + config.driver_data = data;
> config.regmap = chip->regmap;
>
> rdev = devm_regulator_register(&client->dev, &data->desc, &config);
Powered by blists - more mailing lists