| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210122105101.27374-11-gabriel.fernandez@foss.st.com>
Date: Fri, 22 Jan 2021 11:50:57 +0100
From: <gabriel.fernandez@...s.st.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Etienne Carriere <etienne.carriere@...com>,
Gabriel Fernandez <gabriel.fernandez@...s.st.com>
CC: <linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 10/14] clk: stm32mp1: new compatible for secure RCC support
From: Gabriel Fernandez <gabriel.fernandez@...s.st.com>
Platform STM32MP1 can be used in configuration where some clock
resources cannot be accessed by Linux kernel when executing in non-secure
state of the CPU(s).
In such configuration, the RCC clock driver must not register clocks
it cannot access.
They are expected to be registered from another clock driver such
as the SCMI clock driver.
This change uses specific compatible string "st,stm32mp1-rcc-secure"
to specify RCC clock driver configuration where RCC is secure.
Signed-off-by: Etienne Carriere <etienne.carriere@...com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...s.st.com>
---
drivers/clk/Kconfig | 10 ++++
drivers/clk/clk-stm32mp1.c | 101 ++++++++++++++++++++++++++++++++++++-
2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 85856cff506c..ee61aec3b490 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -334,6 +334,16 @@ config COMMON_CLK_STM32MP157
help
Support for stm32mp157 SoC family clocks
+config COMMON_CLK_STM32MP157_SCMI
+ bool "stm32mp157 Clock diver with Trusted Firmware"
+ depends on COMMON_CLK_STM32MP157
+ select COMMON_CLK_SCMI
+ select ARM_SCMI_PROTOCOL
+ default y
+ help
+ Support for stm32mp157 SoC family clocks with Trusted Firmware using
+ SCMI protocol.
+
config COMMON_CLK_STM32F
def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 25e3f272344c..132e1dd42dbd 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -2051,11 +2051,61 @@ static const struct clock_config stm32mp1_clock_cfg[] = {
_DIV(RCC_DBGCFGR, 0, 3, 0, ck_trace_div_table)),
};
+static const u32 stm32mp1_clock_secured[] = {
+ CK_HSE,
+ CK_HSI,
+ CK_CSI,
+ CK_LSI,
+ CK_LSE,
+ PLL1,
+ PLL2,
+ PLL1_P,
+ PLL2_P,
+ PLL2_Q,
+ PLL2_R,
+ CK_MPU,
+ CK_AXI,
+ SPI6,
+ I2C4,
+ I2C6,
+ USART1,
+ RTCAPB,
+ TZC1,
+ TZC2,
+ TZPC,
+ IWDG1,
+ BSEC,
+ STGEN,
+ GPIOZ,
+ CRYP1,
+ HASH1,
+ RNG1,
+ BKPSRAM,
+ RNG1_K,
+ STGEN_K,
+ SPI6_K,
+ I2C4_K,
+ I2C6_K,
+ USART1_K,
+ RTC,
+};
+
+static bool stm32_check_security(const struct clock_config *cfg)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(stm32mp1_clock_secured); i++)
+ if (cfg->id == stm32mp1_clock_secured[i])
+ return true;
+ return false;
+}
+
struct stm32_rcc_match_data {
const struct clock_config *cfg;
unsigned int num;
unsigned int maxbinding;
u32 clear_offset;
+ bool (*check_security)(const struct clock_config *cfg);
};
static struct stm32_rcc_match_data stm32mp1_data = {
@@ -2065,11 +2115,23 @@ static struct stm32_rcc_match_data stm32mp1_data = {
.clear_offset = RCC_CLR,
};
+static struct stm32_rcc_match_data stm32mp1_data_secure = {
+ .cfg = stm32mp1_clock_cfg,
+ .num = ARRAY_SIZE(stm32mp1_clock_cfg),
+ .maxbinding = STM32MP1_LAST_CLK,
+ .clear_offset = RCC_CLR,
+ .check_security = &stm32_check_security
+};
+
static const struct of_device_id stm32mp1_match_data[] = {
{
.compatible = "st,stm32mp1-rcc",
.data = &stm32mp1_data,
},
+ {
+ .compatible = "st,stm32mp1-rcc-secure",
+ .data = &stm32mp1_data_secure,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, stm32mp1_match_data);
@@ -2229,6 +2291,9 @@ static int stm32_rcc_clock_init(struct device *dev, void __iomem *base,
hws[n] = ERR_PTR(-ENOENT);
for (n = 0; n < data->num; n++) {
+ if (data->check_security && data->check_security(&data->cfg[n]))
+ continue;
+
err = stm32_register_hw_clk(dev, clk_data, base, &rlock,
&data->cfg[n]);
if (err) {
@@ -2296,11 +2361,45 @@ static int stm32mp1_rcc_init(struct device *dev)
return ret;
}
+static int get_clock_deps(struct device *dev)
+{
+ static const char * const clock_deps_name[] = {
+ "hsi", "hse", "csi", "lsi", "lse",
+ };
+ size_t deps_size = sizeof(struct clk *) * ARRAY_SIZE(clock_deps_name);
+ struct clk **clk_deps;
+ int i;
+
+ clk_deps = devm_kzalloc(dev, deps_size, GFP_KERNEL);
+ if (!clk_deps)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(clock_deps_name); i++) {
+ struct clk *clk = of_clk_get_by_name(dev_of_node(dev),
+ clock_deps_name[i]);
+
+ if (IS_ERR(clk)) {
+ if (PTR_ERR(clk) != -EINVAL && PTR_ERR(clk) != -ENOENT)
+ return PTR_ERR(clk);
+ } else {
+ /* Device gets a reference count on the clock */
+ clk_deps[i] = devm_clk_get(dev, __clk_get_name(clk));
+ clk_put(clk);
+ }
+ }
+
+ return 0;
+}
+
static int stm32mp1_rcc_clocks_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ int ret = get_clock_deps(dev);
+
+ if (!ret)
+ ret = stm32mp1_rcc_init(dev);
- return stm32mp1_rcc_init(dev);
+ return ret;
}
static int stm32mp1_rcc_clocks_remove(struct platform_device *pdev)
--
2.17.1
Powered by blists - more mailing lists