[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210124135610.1779295-3-iskren.chernev@gmail.com>
Date: Sun, 24 Jan 2021 15:56:09 +0200
From: Iskren Chernev <iskren.chernev@...il.com>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Iskren Chernev <iskren.chernev@...il.com>,
~postmarketos/upstreaming@...ts.sr.ht,
Samuel Pascua <pascua.samuel.14@...il.com>,
Alexey Minnekhanov <alexeymin@...tmarketos.org>
Subject: [PATCH 3/4] ARM: dts: qcom: msm8974-klte: add support for display
From: Samuel Pascua <pascua.samuel.14@...il.com>
Add initial support for the display found on the Samsung Galaxy 5 (klte)
phone. This is based on work from Jonathan Marek & Brian Masney.
Signed-off-by: Samuel Pascua <pascua.samuel.14@...il.com>
Signed-off-by: Iskren Chernev <iskren.chernev@...il.com>
---
.../boot/dts/qcom-msm8974-samsung-klte.dts | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 5a7ac4a31031f..19c96b47a5dbd 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -453,6 +453,16 @@ int {
bias-pull-down;
};
};
+
+ panel_pin: panel {
+ te {
+ pins = "gpio12";
+ function = "mdp_vsync";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
};
sdhc_1: sdhci@...24900 {
@@ -705,6 +715,54 @@ opp_table {
adreno@...00000 {
status = "ok";
};
+
+ mdss@...00000 {
+ status = "ok";
+
+ mdp@...00000 {
+ status = "ok";
+ };
+
+ dsi@...22800 {
+ status = "ok";
+
+ vdda-supply = <&pma8084_l2>;
+ vdd-supply = <&pma8084_l22>;
+ vddio-supply = <&pma8084_l12>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "samsung,s6e3fa2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ dsi-phy@...22a00 {
+ status = "ok";
+
+ vddio-supply = <&pma8084_l12>;
+ };
+ };
};
&spmi_bus {
--
2.30.0
Powered by blists - more mailing lists