linux-kernel - Re: [PATCH 3/3] arm64: dts: qcom: msm8916-longcheer-l8910: Add imu/magnetometer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YA2Xg9PboDMc/vu1@gerhold.net>
Date:   Sun, 24 Jan 2021 16:51:31 +0100
From:   Stephan Gerhold <stephan@...hold.net>
To:     Konrad Dybcio <konrad.dybcio@...ainline.org>
Cc:     Jonathan Albrieux <jonathan.albrieux@...il.com>,
        linux-kernel@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: msm8916-longcheer-l8910: Add
 imu/magnetometer

On Sun, Jan 24, 2021 at 04:07:19PM +0100, Konrad Dybcio wrote:
> > +&blsp_i2c3 {
> > +	status = "okay";
> > +
> > +	imu@68 {
> > +		compatible = "bosch,bmi160";
> > +		reg = <0x68>;
> > +
> > +		vdd-supply = <&pm8916_l17>;
> > +		vddio-supply = <&pm8916_l6>;
> > +
> > +		mount-matrix = "0", "1", "0",
> > +			      "-1", "0", "0",
> > +			       "0", "0", "1";
> > +	};
> > +
> > +	magnetometer@d {
> > +		compatible = "asahi-kasei,ak09911";
> > +		reg = <0x0d>;
> > +
> > +		vdd-supply = <&pm8916_l17>;
> > +		vid-supply = <&pm8916_l6>;
> > +
> > +		reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
> > +
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&mag_reset_default>;
> > +	};
> > +};
> 
> Please sort I2C devices by their address.
> 

+1 :)

> 
> >  	};
> >  
> > +	mag_reset_default: mag-reset-default {
> > +		pins = "gpio111";
> > +		function = "gpio";
> > +
> > +		drive-strength = <2>;
> > +		bias-disable;
> > +	};
> > +
> 
> Please add this after gpio110 to keep it sorted gpio-number-wise.
> 

This is ordered alphabetically. I haven't seen gpio-number order
anywhere yet... :)

Thanks,
Stephan