Message-ID: <CAJZ5v0hn=aUXS-cBG333YXiG2_SUhfkvzsJPYqmWRyDu1zc+VA@mail.gmail.com>
Date:   Mon, 25 Jan 2021 19:15:43 +0100
From:   "Rafael J. Wysocki" <rafael@...nel.org>
To:     Nicolas Pitre <npitre@...libre.com>
Cc:     "Rafael J. Wysocki" <rafael@...nel.org>,
        Naresh Kamboju <naresh.kamboju@...aro.org>,
        Geert Uytterhoeven <geert@...ux-m68k.org>,
        "Rafael J. Wysocki" <rjw@...ysocki.net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Russell King <linux@...linux.org.uk>,
        Linux PM <linux-pm@...r.kernel.org>,
        linux-clk <linux-clk@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Mark Brown <broonie@...nel.org>, Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH v3] PM / clk: make PM clock layer compatible with clocks
 that must sleep

On Sun, Jan 24, 2021 at 12:07 AM Nicolas Pitre <npitre@...libre.com> wrote:
>
> The clock API splits its interface into sleepable ant atomic contexts:
>
> - clk_prepare/clk_unprepare for stuff that might sleep
>
> - clk_enable_clk_disable for anything that may be done in atomic context
>
> The code handling runtime PM for clocks only calls clk_disable() on
> suspend requests, and clk_enable on resume requests. This means that
> runtime PM with clock providers that only have the prepare/unprepare
> methods implemented is basically useless.
>
> Many clock implementations can't accommodate atomic contexts. This is
> often the case when communication with the clock happens through another
> subsystem like I2C or SCMI.
>
> Let's make the clock PM code useful with such clocks by safely invoking
> clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when
> such clocks are registered with the PM layer then pm_runtime_irq_safe()
> can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume()
> may be invoked in atomic context.
>
> For clocks that do implement the enable and disable methods then
> everything just works as before.
>
> A note on sparse:
> According to https://lwn.net/Articles/109066/ there are things
> that sparse can't cope with. In particular, pm_clk_op_lock() and
> pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on
> some runtime condition. To work around that we tell sparse the lock
> is always untaken for the purpose of static analisys.
>
> Thanks to Naresh Kamboju for reporting issues with the initial patch.
>
> Signed-off-by: Nicolas Pitre <npitre@...libre.com>
> Tested-by: Naresh Kamboju <naresh.kamboju@...aro.org>

It looks like sparse is still complaining:

https://lore.kernel.org/linux-acpi/600dc681.3mAl9WQXnragfNZk%25lkp@intel.com/




>
> ---
>
> Changes from v2:
>
> - added workarounds to cope with sparse limitations (see above).
>
> Changes from v1:
>
> - made dummy clk_is_enabled_when_prepared() dependent on
>   CONFIG_HAVE_CLK_PREPARE instead of CONFIG_HAVE_CLK.
>
> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
> index ced6863a16..e6956ce301 100644
> --- a/drivers/base/power/clock_ops.c
> +++ b/drivers/base/power/clock_ops.c
> @@ -23,6 +23,7 @@
>  enum pce_status {
>         PCE_STATUS_NONE = 0,
>         PCE_STATUS_ACQUIRED,
> +       PCE_STATUS_PREPARED,
>         PCE_STATUS_ENABLED,
>         PCE_STATUS_ERROR,
>  };
> @@ -32,8 +33,108 @@ struct pm_clock_entry {
>         char *con_id;
>         struct clk *clk;
>         enum pce_status status;
> +       bool enabled_when_prepared;
>  };
>
> +/**
> + * pm_clk_list_lock - ensure exclusive access for modifying the PM clock
> + *                   entry list.
> + * @psd: pm_subsys_data instance corresponding to the PM clock entry list
> + *      and clk_op_might_sleep count to be modified.
> + *
> + * Get exclusive access before modifying the PM clock entry list and the
> + * clock_op_might_sleep count to guard against concurrent modifications.
> + * This also protects against a concurrent clock_op_might_sleep and PM clock
> + * entry list usage in pm_clk_suspend()/pm_clk_resume() that may or may not
> + * happen in atomic context, hence both the mutex and the spinlock must be
> + * taken here.
> + */
> +static inline void pm_clk_list_lock(struct pm_subsys_data *psd)
> +{
> +       mutex_lock(&psd->clock_mutex);
> +       spin_lock_irq(&psd->lock);
> +}
> +
> +/**
> + * pm_clk_list_unlock - counterpart to pm_clk_list_lock().
> + * @psd: the same pm_subsys_data instance previously passed to
> + *      pm_clk_list_lock().
> + */
> +static inline void pm_clk_list_unlock(struct pm_subsys_data *psd)
> +{
> +       spin_unlock_irq(&psd->lock);
> +       mutex_unlock(&psd->clock_mutex);
> +}
> +
> +/**
> + * pm_clk_op_lock - ensure exclusive access for performing clock operations.
> + * @psd: pm_subsys_data instance corresponding to the PM clock entry list
> + *      and clk_op_might_sleep count being used.
> + * @flags: stored irq flags.
> + * @fn: string for the caller function's name.
> + *
> + * This is used by pm_clk_suspend() and pm_clk_resume() to guard
> + * against concurrent modifications to the clock entry list and the
> + * clock_op_might_sleep count. If clock_op_might_sleep is != 0 then
> + * only the mutex can be locked and those functions can only be used in
> + * non atomic context. If clock_op_might_sleep == 0 then these functions
> + * may be used in any context and only the spinlock can be locked.
> + * Returns -EINVAL if called in atomic context when clock ops might sleep.
> + */
> +static int pm_clk_op_lock(struct pm_subsys_data *psd, unsigned long *flags,
> +                         const char *fn)
> +{
> +       bool atomic_context = in_atomic() || irqs_disabled();
> +
> +try_again:
> +       spin_lock_irqsave(&psd->lock, *flags);
> +       if (!psd->clock_op_might_sleep) {
> +               /* the __release is there to work around sparse limitations */
> +               __release(&psd->lock);
> +               return 0;
> +       }
> +
> +       /* bail out if in atomic context */
> +       if (atomic_context) {
> +               pr_err("%s: atomic context with clock_ops_might_sleep = %d",
> +                      fn, psd->clock_op_might_sleep);
> +               spin_unlock_irqrestore(&psd->lock, *flags);
> +               might_sleep();
> +               return -EPERM;
> +       }
> +
> +       /* we must switch to the mutex */
> +       spin_unlock_irqrestore(&psd->lock, *flags);
> +       mutex_lock(&psd->clock_mutex);
> +
> +       /*
> +        * There was a possibility for psd->clock_op_might_sleep
> +        * to become 0 above. Keep the mutex only if not the case.
> +        */
> +       if (likely(psd->clock_op_might_sleep))
> +               return 0;
> +
> +       mutex_unlock(&psd->clock_mutex);
> +       goto try_again;
> +}
> +
> +/**
> + * pm_clk_op_unlock - counterpart to pm_clk_op_lock().
> + * @psd: the same pm_subsys_data instance previously passed to
> + *      pm_clk_op_lock().
> + * @flags: irq flags provided by pm_clk_op_lock().
> + */
> +static void pm_clk_op_unlock(struct pm_subsys_data *psd, unsigned long *flags)
> +{
> +       if (psd->clock_op_might_sleep) {
> +               mutex_unlock(&psd->clock_mutex);
> +       } else {
> +               /* the __acquire is there to work around sparse limitations */
> +               __acquire(&psd->lock);
> +               spin_unlock_irqrestore(&psd->lock, *flags);
> +       }
> +}
> +
>  /**
>   * pm_clk_enable - Enable a clock, reporting any errors
>   * @dev: The device for the given clock
> @@ -43,14 +144,21 @@ static inline void __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce
>  {
>         int ret;
>
> -       if (ce->status < PCE_STATUS_ERROR) {
> +       switch (ce->status) {
> +       case PCE_STATUS_ACQUIRED:
> +               ret = clk_prepare_enable(ce->clk);
> +               break;
> +       case PCE_STATUS_PREPARED:
>                 ret = clk_enable(ce->clk);
> -               if (!ret)
> -                       ce->status = PCE_STATUS_ENABLED;
> -               else
> -                       dev_err(dev, "%s: failed to enable clk %p, error %d\n",
> -                               __func__, ce->clk, ret);
> +               break;
> +       default:
> +               return;
>         }
> +       if (!ret)
> +               ce->status = PCE_STATUS_ENABLED;
> +       else
> +               dev_err(dev, "%s: failed to enable clk %p, error %d\n",
> +                       __func__, ce->clk, ret);
>  }
>
>  /**
> @@ -64,17 +172,20 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
>                 ce->clk = clk_get(dev, ce->con_id);
>         if (IS_ERR(ce->clk)) {
>                 ce->status = PCE_STATUS_ERROR;
> +               return;
> +       } else if (clk_is_enabled_when_prepared(ce->clk)) {
> +               /* we defer preparing the clock in that case */
> +               ce->status = PCE_STATUS_ACQUIRED;
> +               ce->enabled_when_prepared = true;
> +       } else if (clk_prepare(ce->clk)) {
> +               ce->status = PCE_STATUS_ERROR;
> +               dev_err(dev, "clk_prepare() failed\n");
> +               return;
>         } else {
> -               if (clk_prepare(ce->clk)) {
> -                       ce->status = PCE_STATUS_ERROR;
> -                       dev_err(dev, "clk_prepare() failed\n");
> -               } else {
> -                       ce->status = PCE_STATUS_ACQUIRED;
> -                       dev_dbg(dev,
> -                               "Clock %pC con_id %s managed by runtime PM.\n",
> -                               ce->clk, ce->con_id);
> -               }
> +               ce->status = PCE_STATUS_PREPARED;
>         }
> +       dev_dbg(dev, "Clock %pC con_id %s managed by runtime PM.\n",
> +               ce->clk, ce->con_id);
>  }
>
>  static int __pm_clk_add(struct device *dev, const char *con_id,
> @@ -106,9 +217,11 @@ static int __pm_clk_add(struct device *dev, const char *con_id,
>
>         pm_clk_acquire(dev, ce);
>
> -       spin_lock_irq(&psd->lock);
> +       pm_clk_list_lock(psd);
>         list_add_tail(&ce->node, &psd->clock_list);
> -       spin_unlock_irq(&psd->lock);
> +       if (ce->enabled_when_prepared)
> +               psd->clock_op_might_sleep++;
> +       pm_clk_list_unlock(psd);
>         return 0;
>  }
>
> @@ -239,14 +352,20 @@ static void __pm_clk_remove(struct pm_clock_entry *ce)
>         if (!ce)
>                 return;
>
> -       if (ce->status < PCE_STATUS_ERROR) {
> -               if (ce->status == PCE_STATUS_ENABLED)
> -                       clk_disable(ce->clk);
> -
> -               if (ce->status >= PCE_STATUS_ACQUIRED) {
> -                       clk_unprepare(ce->clk);
> +       switch (ce->status) {
> +       case PCE_STATUS_ENABLED:
> +               clk_disable(ce->clk);
> +               fallthrough;
> +       case PCE_STATUS_PREPARED:
> +               clk_unprepare(ce->clk);
> +               fallthrough;
> +       case PCE_STATUS_ACQUIRED:
> +       case PCE_STATUS_ERROR:
> +               if (!IS_ERR(ce->clk))
>                         clk_put(ce->clk);
> -               }
> +               break;
> +       default:
> +               break;
>         }
>
>         kfree(ce->con_id);
> @@ -269,7 +388,7 @@ void pm_clk_remove(struct device *dev, const char *con_id)
>         if (!psd)
>                 return;
>
> -       spin_lock_irq(&psd->lock);
> +       pm_clk_list_lock(psd);
>
>         list_for_each_entry(ce, &psd->clock_list, node) {
>                 if (!con_id && !ce->con_id)
> @@ -280,12 +399,14 @@ void pm_clk_remove(struct device *dev, const char *con_id)
>                         goto remove;
>         }
>
> -       spin_unlock_irq(&psd->lock);
> +       pm_clk_list_unlock(psd);
>         return;
>
>   remove:
>         list_del(&ce->node);
> -       spin_unlock_irq(&psd->lock);
> +       if (ce->enabled_when_prepared)
> +               psd->clock_op_might_sleep--;
> +       pm_clk_list_unlock(psd);
>
>         __pm_clk_remove(ce);
>  }
> @@ -307,19 +428,21 @@ void pm_clk_remove_clk(struct device *dev, struct clk *clk)
>         if (!psd || !clk)
>                 return;
>
> -       spin_lock_irq(&psd->lock);
> +       pm_clk_list_lock(psd);
>
>         list_for_each_entry(ce, &psd->clock_list, node) {
>                 if (clk == ce->clk)
>                         goto remove;
>         }
>
> -       spin_unlock_irq(&psd->lock);
> +       pm_clk_list_unlock(psd);
>         return;
>
>   remove:
>         list_del(&ce->node);
> -       spin_unlock_irq(&psd->lock);
> +       if (ce->enabled_when_prepared)
> +               psd->clock_op_might_sleep--;
> +       pm_clk_list_unlock(psd);
>
>         __pm_clk_remove(ce);
>  }
> @@ -330,13 +453,16 @@ EXPORT_SYMBOL_GPL(pm_clk_remove_clk);
>   * @dev: Device to initialize the list of PM clocks for.
>   *
>   * Initialize the lock and clock_list members of the device's pm_subsys_data
> - * object.
> + * object, set the count of clocks that might sleep to 0.
>   */
>  void pm_clk_init(struct device *dev)
>  {
>         struct pm_subsys_data *psd = dev_to_psd(dev);
> -       if (psd)
> +       if (psd) {
>                 INIT_LIST_HEAD(&psd->clock_list);
> +               mutex_init(&psd->clock_mutex);
> +               psd->clock_op_might_sleep = 0;
> +       }
>  }
>  EXPORT_SYMBOL_GPL(pm_clk_init);
>
> @@ -372,12 +498,13 @@ void pm_clk_destroy(struct device *dev)
>
>         INIT_LIST_HEAD(&list);
>
> -       spin_lock_irq(&psd->lock);
> +       pm_clk_list_lock(psd);
>
>         list_for_each_entry_safe_reverse(ce, c, &psd->clock_list, node)
>                 list_move(&ce->node, &list);
> +       psd->clock_op_might_sleep = 0;
>
> -       spin_unlock_irq(&psd->lock);
> +       pm_clk_list_unlock(psd);
>
>         dev_pm_put_subsys_data(dev);
>
> @@ -397,23 +524,30 @@ int pm_clk_suspend(struct device *dev)
>         struct pm_subsys_data *psd = dev_to_psd(dev);
>         struct pm_clock_entry *ce;
>         unsigned long flags;
> +       int ret;
>
>         dev_dbg(dev, "%s()\n", __func__);
>
>         if (!psd)
>                 return 0;
>
> -       spin_lock_irqsave(&psd->lock, flags);
> +       ret = pm_clk_op_lock(psd, &flags, __func__);
> +       if (ret)
> +               return ret;
>
>         list_for_each_entry_reverse(ce, &psd->clock_list, node) {
> -               if (ce->status < PCE_STATUS_ERROR) {
> -                       if (ce->status == PCE_STATUS_ENABLED)
> +               if (ce->status == PCE_STATUS_ENABLED) {
> +                       if (ce->enabled_when_prepared) {
> +                               clk_disable_unprepare(ce->clk);
> +                               ce->status = PCE_STATUS_ACQUIRED;
> +                       } else {
>                                 clk_disable(ce->clk);
> -                       ce->status = PCE_STATUS_ACQUIRED;
> +                               ce->status = PCE_STATUS_PREPARED;
> +                       }
>                 }
>         }
>
> -       spin_unlock_irqrestore(&psd->lock, flags);
> +       pm_clk_op_unlock(psd, &flags);
>
>         return 0;
>  }
> @@ -428,18 +562,21 @@ int pm_clk_resume(struct device *dev)
>         struct pm_subsys_data *psd = dev_to_psd(dev);
>         struct pm_clock_entry *ce;
>         unsigned long flags;
> +       int ret;
>
>         dev_dbg(dev, "%s()\n", __func__);
>
>         if (!psd)
>                 return 0;
>
> -       spin_lock_irqsave(&psd->lock, flags);
> +       ret = pm_clk_op_lock(psd, &flags, __func__);
> +       if (ret)
> +               return ret;
>
>         list_for_each_entry(ce, &psd->clock_list, node)
>                 __pm_clk_enable(dev, ce);
>
> -       spin_unlock_irqrestore(&psd->lock, flags);
> +       pm_clk_op_unlock(psd, &flags);
>
>         return 0;
>  }
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 8c1d04db99..3d751ae5bc 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1164,6 +1164,27 @@ int clk_enable(struct clk *clk)
>  }
>  EXPORT_SYMBOL_GPL(clk_enable);
>
> +/**
> + * clk_is_enabled_when_prepared - indicate if preparing a clock also enables it.
> + * @clk: clock source
> + *
> + * Returns true if clk_prepare() implicitly enables the clock, effectively
> + * making clk_enable()/clk_disable() no-ops, false otherwise.
> + *
> + * This is of interest mainly to power management code where actually
> + * disabling the clock also requires unpreparing it to have any material
> + * effect.
> + *
> + * Regardless of the value returned here, the caller must always invoke
> + * clk_enable() or clk_prepare_enable()  and counterparts for usage counts
> + * to be right.
> + */
> +bool clk_is_enabled_when_prepared(struct clk *clk)
> +{
> +       return clk && !(clk->core->ops->enable && clk->core->ops->disable);
> +}
> +EXPORT_SYMBOL_GPL(clk_is_enabled_when_prepared);
> +
>  static int clk_core_prepare_enable(struct clk_core *core)
>  {
>         int ret;
> diff --git a/include/linux/clk.h b/include/linux/clk.h
> index 31ff1bf1b7..a4a86aa8b1 100644
> --- a/include/linux/clk.h
> +++ b/include/linux/clk.h
> @@ -238,6 +238,7 @@ static inline bool clk_is_match(const struct clk *p, const struct clk *q)
>
>  #endif
>
> +#ifdef CONFIG_HAVE_CLK_PREPARE
>  /**
>   * clk_prepare - prepare a clock source
>   * @clk: clock source
> @@ -246,10 +247,26 @@ static inline bool clk_is_match(const struct clk *p, const struct clk *q)
>   *
>   * Must not be called from within atomic context.
>   */
> -#ifdef CONFIG_HAVE_CLK_PREPARE
>  int clk_prepare(struct clk *clk);
>  int __must_check clk_bulk_prepare(int num_clks,
>                                   const struct clk_bulk_data *clks);
> +
> +/**
> + * clk_is_enabled_when_prepared - indicate if preparing a clock also enables it.
> + * @clk: clock source
> + *
> + * Returns true if clk_prepare() implicitly enables the clock, effectively
> + * making clk_enable()/clk_disable() no-ops, false otherwise.
> + *
> + * This is of interest mainly to the power management code where actually
> + * disabling the clock also requires unpreparing it to have any material
> + * effect.
> + *
> + * Regardless of the value returned here, the caller must always invoke
> + * clk_enable() or clk_prepare_enable()  and counterparts for usage counts
> + * to be right.
> + */
> +bool clk_is_enabled_when_prepared(struct clk *clk);
>  #else
>  static inline int clk_prepare(struct clk *clk)
>  {
> @@ -263,6 +280,11 @@ clk_bulk_prepare(int num_clks, const struct clk_bulk_data *clks)
>         might_sleep();
>         return 0;
>  }
> +
> +static inline bool clk_is_enabled_when_prepared(struct clk *clk)
> +{
> +       return false;
> +}
>  #endif
>
>  /**
> diff --git a/include/linux/pm.h b/include/linux/pm.h
> index 47aca6bac1..482313a8cc 100644
> --- a/include/linux/pm.h
> +++ b/include/linux/pm.h
> @@ -537,6 +537,8 @@ struct pm_subsys_data {
>         spinlock_t lock;
>         unsigned int refcount;
>  #ifdef CONFIG_PM_CLK
> +       unsigned int clock_op_might_sleep;
> +       struct mutex clock_mutex;
>         struct list_head clock_list;
>  #endif
>  #ifdef CONFIG_PM_GENERIC_DOMAINS

Powered by blists - more mailing lists