linux-kernel - [PATCH 5.10 140/199] xhci: make sure TRB is fully written before giving it to the controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 25 Jan 2021 19:39:22 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Ross Zwisler <zwisler@...gle.com>,
        Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [PATCH 5.10 140/199] xhci: make sure TRB is fully written before giving it to the controller

From: Mathias Nyman <mathias.nyman@...ux.intel.com>

commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream.

Once the command ring doorbell is rung the xHC controller will parse all
command TRBs on the command ring that have the cycle bit set properly.

If the driver just started writing the next command TRB to the ring when
hardware finished the previous TRB, then HW might fetch an incomplete TRB
as long as its cycle bit set correctly.

A command TRB is 16 bytes (128 bits) long.
Driver writes the command TRB in four 32 bit chunks, with the chunk
containing the cycle bit last. This does however not guarantee that
chunks actually get written in that order.

This was detected in stress testing when canceling URBs with several
connected USB devices.
Two consecutive "Set TR Dequeue pointer" commands got queued right
after each other, and the second one was only partially written when
the controller parsed it, causing the dequeue pointer to be set
to bogus values. This was seen as error messages:

"Mismatch between completed Set TR Deq Ptr command & xHCI internal state"

Solution is to add a write memory barrier before writing the cycle bit.

Cc: <stable@...r.kernel.org>
Tested-by: Ross Zwisler <zwisler@...gle.com>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2930,6 +2930,8 @@ static void queue_trb(struct xhci_hcd *x
 	trb->field[0] = cpu_to_le32(field1);
 	trb->field[1] = cpu_to_le32(field2);
 	trb->field[2] = cpu_to_le32(field3);
+	/* make sure TRB is fully written before giving it to the controller */
+	wmb();
 	trb->field[3] = cpu_to_le32(field4);

 	trace_xhci_queue_trb(ring, trb);