linux-kernel - Re: [PATCH v9 1/2] uio: uio_dfl: add userspace i/o driver for DFL bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210126024005.GB3907@yilunxu-OptiPlex-7050>
Date:   Tue, 26 Jan 2021 10:40:05 +0800
From:   Xu Yilun <yilun.xu@...el.com>
To:     Moritz Fischer <mdf@...nel.org>
Cc:     Tom Rix <trix@...hat.com>, gregkh@...uxfoundation.org,
        linux-fpga@...r.kernel.org, linux-kernel@...r.kernel.org,
        lgoncalv@...hat.com, hao.wu@...el.com
Subject: Re: [PATCH v9 1/2] uio: uio_dfl: add userspace i/o driver for DFL bus

On Mon, Jan 25, 2021 at 06:22:55PM -0800, Moritz Fischer wrote:
> On Mon, Jan 25, 2021 at 11:00:38AM -0800, Tom Rix wrote:
> > 
> > On 1/25/21 12:49 AM, Xu Yilun wrote:
> > > This patch supports the DFL drivers be written in userspace. This is
> > > realized by exposing the userspace I/O device interfaces.
> > >
> > > The driver now only binds the ether group feature, which has no irq. So
> > > the irq support is not implemented yet.
> > >
> > > Signed-off-by: Xu Yilun <yilun.xu@...el.com>
> > > ---
> > > v9: switch to add a uio driver in drivers/uio
> > > ---
> > >  drivers/uio/Kconfig   | 13 ++++++++++
> > >  drivers/uio/Makefile  |  1 +
> > >  drivers/uio/uio_dfl.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 
> > You should add this to the MAINTAINERS file.
> 
> This is covered by MAINTAINERS under drivers/uio.

Yes. But is it OK I also add the file in "FPGA DFL DRIVERS"? So DFL
developers would also be aware if there is change. It is a little
different from other feature driver, it is like a generic driver for
DFL bus.

> > 
> > >  3 files changed, 80 insertions(+)
> > >  create mode 100644 drivers/uio/uio_dfl.c
> > >
> > > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > > index 202ee81..44778f8 100644
> > > --- a/drivers/uio/Kconfig
> > > +++ b/drivers/uio/Kconfig
> > > @@ -165,4 +165,17 @@ config UIO_HV_GENERIC
> > >  	  to network and storage devices from userspace.
> > >  
> > >  	  If you compile this as a module, it will be called uio_hv_generic.
> > > +
> > > +config UIO_DFL
> > > +	tristate "Generic driver for DFL bus"
> > 
> > The term 'DFL' will be unknown to folks in drivers/uio
> > 
> > I think it would be better if DFL was always prefixed 'FPGA DFL'
> > 
> > > +	depends on FPGA_DFL
> > > +	help
> > > +	  Generic DFL (Device Feature List) driver for Userspace I/O devices.
> > > +	  It is useful to provide direct access to DFL devices from userspace.
> > > +	  A sample userspace application using this driver is available for
> > > +	  download in a git repository:
> > > +
> > > +	    git clone https://github.com/OPAE/opae-sdk.git
> > > +
> > > +	  If you compile this as a module, it will be called uio_dfl.
> 
> I'm not sure KConfig is the right place for this.

Do you mean the OPAE link? I see several uio drivers provide their
userspace application link in Kconfig. I guess the uio drivers are
selected for these applications so it may be better pointing out where
they are.

Thanks,
Yilun