| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210127172500.13356-18-andre.przywara@arm.com>
Date: Wed, 27 Jan 2021 17:24:57 +0000
From: Andre Przywara <andre.przywara@....com>
To: Maxime Ripard <mripard@...nel.org>, Chen-Yu Tsai <wens@...e.org>
Cc: Jernej Skrabec <jernej.skrabec@...l.net>,
Samuel Holland <samuel@...lland.org>,
Icenowy Zheng <icenowy@...c.io>, Rob Herring <robh@...nel.org>,
Clément Péron <peron.clem@...il.com>,
Shuosheng Huang <huangshuosheng@...winnertech.com>,
Yangtao Li <tiny.windzz@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com,
Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>
Subject: [PATCH v5 17/20] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling
As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.
While we are at it, generalise the existing code by allowing a bitmap
of bits to clear, to cover newer SoCs: The A100 and H616 use a different
bit for the SIDDQ control.
Signed-off-by: Andre Przywara <andre.przywara@....com>
Acked-by: Maxime Ripard <mripard@...nel.org>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 29 +++++++++++----------------
1 file changed, 12 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 788dd5cdbb7d..539209fe3468 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -43,7 +43,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_OTGCTL 0x20
-#define REG_PMU_UNK1 0x10
+#define REG_HCI_PHY_CTL 0x10
#define PHYCTL_DATA BIT(7)
@@ -115,9 +115,9 @@ struct sun4i_usb_phy_cfg {
int hsic_index;
enum sun4i_usb_phy_type type;
u32 disc_thresh;
+ u32 hci_phy_ctl_siddq;
u8 phyctl_offset;
bool dedicated_clocks;
- bool enable_pmu_unk1;
bool phy0_dual_route;
int missing_phys;
};
@@ -288,6 +288,12 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (phy->pmu && data->cfg->hci_phy_ctl_siddq) {
+ val = readl(phy->pmu + REG_HCI_PHY_CTL);
+ val &= ~data->cfg->hci_phy_ctl_siddq;
+ writel(val, phy->pmu + REG_HCI_PHY_CTL);
+ }
+
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
if (phy->index == 0) {
@@ -297,11 +303,6 @@ static int sun4i_usb_phy_init(struct phy *_phy)
writel(val, data->base + data->cfg->phyctl_offset);
}
} else {
- if (phy->pmu && data->cfg->enable_pmu_unk1) {
- val = readl(phy->pmu + REG_PMU_UNK1);
- writel(val & ~2, phy->pmu + REG_PMU_UNK1);
- }
-
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
@@ -863,7 +864,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -872,7 +872,6 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -881,7 +880,6 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -890,7 +888,6 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -899,7 +896,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -908,7 +904,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
@@ -925,7 +920,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_siddq = BIT(1),
.phy0_dual_route = true,
};
@@ -935,7 +930,7 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_siddq = BIT(1),
.phy0_dual_route = true,
};
@@ -945,7 +940,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_siddq = BIT(1),
.phy0_dual_route = true,
};
@@ -955,7 +950,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_siddq = BIT(1),
.phy0_dual_route = true,
};
--
2.17.5
Powered by blists - more mailing lists